Uploaded November 2026 | Updated November 2026, 2 days ago
After only a few months of use around the house, the fan blade in my Sanitaire Tradition SC689B broke. I am absolutely baffled by this as I don't remember a point in time where I was using it and it suddenly got louder and out of balance.
I replaced the belt a couple months ago as the brush bar started loosing power. The first time I turned it on after the belt replacement, it was very noisy and had a lot of vibration. Since I think the belt was somewhat worn out since I got it, I figured that was just the sound and feel of the brush roll working properly now and thought nothing of it. Someone later suggested in the comments that the fan is broken, and sure enough, and entire blade is missing.
This is the first time I've ever had a direct air vacuum's fan blade break. I've used Orecks in the garage for years, collecting small pebbles that track in, wood scraps, small screws/nails, etc., never a problem. This machine was mostly used upstairs in relatively light duty scenarios. I have no idea why this broke or when.
This unit calls for the low-profile fan which is about 11/16th" in height, model 81092. The first ones I ordered from Amazon weren't the correct measurements and didn't fit. The second pair I ordered directly from Sanitaire were shipped via FedEx, and FedEx had a great deal of difficulty delivering the package and smashed it in the process. Fortunately the fans weren't busted.
It's very disappointing to me that the fan broke in such short order, but it was interesting to take apart the unit for the first time and see the internal design. It's great--very serviceable, simple to take apart, not a lot of parts, and very little to go wrong. This is one of the easiest vacuums to service that I've worked with.
With the new fan in place, it sounds and works like new again. Very curious to see how long this replacement fan will last. It's made of a fairly brittle feeling plastic so I'm not surprised it broke and I don't have particularly high confidence in it not breaking again.
After only a few months of use around the house, the fan blade in my Sanitaire Tradition SC689B broke. I am absolutely baffled by this as I don't remember a point in time where I was using it and it suddenly got louder and out of balance.
I replaced the belt a couple months ago as the brush bar started loosing power. The first time I turned it on after the belt replacement, it was very noisy and had a lot of vibration. Since I think the belt was somewhat worn out since I got it, I figured that was just the sound and feel of the brush roll working properly now and thought nothing of it. Someone later suggested in the comments that the fan is broken, and sure enough, and entire blade is missing.
This is the first time I've ever had a direct air vacuum's fan blade break. I've used Orecks in the garage for years, collecting small pebbles that track in, wood scraps, small screws/nails, etc., never a problem. This machine was mostly used upstairs in relatively light duty scenarios. I have no idea why this broke or when.
This unit calls for the low-profile fan which is about 11/16th" in height, model 81092. The first ones I ordered from Amazon weren't the correct measurements and didn't fit. The second pair I ordered directly from Sanitaire were shipped via FedEx, and FedEx had a great deal of difficulty delivering the package and smashed it in the process. Fortunately the fans weren't busted.
It's very disappointing to me that the fan broke in such short order, but it was interesting to take apart the unit for the first time and see the internal design. It's great--very serviceable, simple to take apart, not a lot of parts, and very little to go wrong. This is one of the easiest vacuums to service that I've worked with.
With the new fan in place, it sounds and works like new again. Very curious to see how long this replacement fan will last. It's made of a fairly brittle feeling plastic so I'm not surprised it broke and I don't have particularly high confidence in it not breaking again.



![Blade Swap | Lasko B20540 Power Plus Box Fan and Lasko H20301 High Velocity Fan
Blade swap between the Lasko B20540 Power Plus box fan and the Lasko H20301 High Velocity fan. Very interesting results I was not expecting.
The petal blade from the box fan seemed to put more load on the HV fans motor than the default blade. There was enough of an increase in drag to create better speed variance out of the motor. The petal blade was significantly quieter on all speeds, but did result in a slight reduction in air flow. I would consider it overall a better fit, the massive increase in speed variance and significant reduction in noise are both worth a slight reduction in air movement to me. The HV fan was still very powerful with the petal blade.
The box fan didnt change much at all between the two blades in any respect. Im really not sure why this is considering how much of a difference there was on the HV fan. Perhaps the limitation on the box fan is the aerodynamic design, the restrictive plastic guards paired with the round blades being inside a box with varying turbulence. A box fan without a venturi ring really is an aerodynamics disaster.
I think both of these units look pretty cool with the opposite blades, especially the PowerPlus. I think having the metal blade in that unit works very well with the marketing and probably would have had better success than that awful all metal unit Lasko sold in the 2010s for a short period of time.
The specifications recorded during the video are as follows, represented as [Power (watts) / Wind Speed Close (MPH) / Wind Speed from ~5 Away (MPH) / Air Flow (CFM) / Efficiency (CFM/watt)].
Power Plus, default blade:
Low: 71 / 8.2 / 5 / 1,073 / 15.
Medium: 87 / 10.2 / 6 / 1,321 / 15.
High: 100 / 12 / 6 / 1,460 / 14.6.
Power Plus, H20301 blade:
Low: 70 / 9 / 6 / 1,101 / 15.7.
Medium: 86 / 11 / 6 / 1,349 / 15.7.
High: 99 / 11.6 / 7 / 1,514 / 15.3.
H20301, default blade:
Low: 93 / 13 / 8 / 1,509 / 16.2.
Medium: 105 / 15 / 9 / 1,739 / 16.6.
High: 127 / 16.5 / 10 / 1,840 / 14.5.
H20301, Power Plus blade:
Low: 96 / 10 / 6 / 1,293 / 13.5.
Medium: 107 / 11.6 / 7 / 1,432 / 13.4.
High: 130 / 14.5 / 9 / 1,817 / 14. Blade Swap | Lasko B20540 Power Plus Box Fan and Lasko H20301 High Velocity Fan](https://i.ytimg.com/vi/Ga6fcIt14_M/mqdefault.jpg)






