Uploaded October 2026 | Updated November 2026, 2 days ago
Cleaning and servicing a Lasko Air Companion fan model 3513.
The unit was fully disassembled. The rear guard was put into the dishwasher; I did not want to put the front one in there due to concerns about the logo getting damaged. The front guard and remainder of the parts were washed manually in the sink. The motor was disassembled, cleaned, lubricated, reassembled, and bearings aligned. All cleaned parts were reassembled.
The unit now looks and runs like new. Very good fan.
Cleaning and servicing a Lasko Air Companion fan model 3513.
The unit was fully disassembled. The rear guard was put into the dishwasher; I did not want to put the front one in there due to concerns about the logo getting damaged. The front guard and remainder of the parts were washed manually in the sink. The motor was disassembled, cleaned, lubricated, reassembled, and bearings aligned. All cleaned parts were reassembled.
The unit now looks and runs like new. Very good fan.









![Quiet, High Efficiency Box fan Build from Scrap Parts | Performance Analysis and Review
Most of the box fans you can buy today arent very good. Some are a decent value considering how inexpensive they are, but they objectively leave a lot to be desired.
Many models such as the Lasko lineup havent changed much in the last 2+ decades. Similar blades, similar motors, similar, guards, etc.. They seem to perform worse and worse every year as manufacturing costs are cut more and more. It really shouldnt be difficult to build a good fan at this point, these companies are just opting not to. Many of them like Lasko dont have to; the name is known, it has a market monopoly, the stuff is cheap, so it sells just because it exists.
I asked myself the question, Can I build a better box fan than most of whats on the market today just using random scrap parts I have around the shop?, and unfortunately for whats on the market today, the answer was yes.
I combined a blade set that I bought many years ago for experimentation with a motor out of a busted air filter and put it into an old box fan frame that another collector used for parts. To little surprise, we came up with a build thats substantially better in most all respects than the majority of the models you can buy today.
This is an objectively very good box fan, aside from obvious physical issues like the potential to tilt backwards on high. It makes a reasonable amount of noise for the air moved, it doesnt use a lot of power, the air carries well, and it has a good range in speeds making the use cases very versatile.
Im not sure what speed this blade is designed for, but it does seem like were exceeding where it works best at. There appears to be a point of diminishing returns where the distance the air pushed increases very little for much higher RPMs, power consumption, noise, and reduction in efficiency.
With a few issues aside, Id consider this a generally decent fan. Its quite abysmal that we could cobble something together with mis-matched parts from various sources and come up with something superior to most of whats mass produced today. The current box fan market is really in quite a sad state of existence...
The specifications measured during the video are as followed, represented as [Loudness (dBA) / Power (watts) / Current (amps) / Air Movement Volume (CFM) / Efficiency (CFM/watt) / Air Flow Velocity in MPH at 0 / 5 / 10].
Low: [46 / 41 / 0.34 / 1,073 / 26 / 9 / 6 / 4].
Medium: [56 / 65 / 0.55 / 1,432 / 22 / 12.5 / 7 / 5].
High: [61 / 118 / 0.98 / 1,764 / 15 / 15 / 9 / 6]. Quiet, High Efficiency Box fan Build from Scrap Parts | Performance Analysis and Review](https://i.ytimg.com/vi/Kt0AvlW46rM/mqdefault.jpg)
