Uploaded October 2026 | Updated November 2026, 2 days ago
The initial checkout of a Lasko 20" High Velocity Max Performance Fan model H20301. I've been very curious about these fans for many years but could never rationalize the rather lofty retail price they go for. I can however, rationalize a few dollars at the thrift store.
I've heard a lot of mixed things about these, some people say they're great, some people say they're awful, some people say they're loud. I had no idea what to expect. This was my first time using one of these in person and this was my raw reaction.
I, somewhat surprisingly, thing this is a pleasant surprise. There's nothing exceptional about it, but there's nothing really wrong with it either, besides the stupid blade. The physical form factor is nice, I like the switch in the front and the guard comes apart for easy cleaning without needing to detach from the stand. It appears to be the same style motor used in the rest of Lasko's fans which are generally reliable if kept clean and are easy to service. Performance is relatively average; it's not quite as powerful as I was expecting, but it is dirty. Noise level is also average, not very quiet but not unreasonably loud for this style fan either.
The only major failure point in this unit is the blade. The blade design is absolute trash. The ends of the blade move no air, you're really only getting about 17" of surface area moving air on this thing, so it's very bulky for nothing. This seems to be a failure point in a lot of Lasko fans. Lasko seriously needs to put a lot more R&D into aerodynamics and come out with some new blades that work better. These stink.
What I get hung up on with this unit is the value. While many Lasko fans leave a lot to be desired, I feel like they're a good value when considering the price. Unlike with the box fans, there's a fair bit of market competition with high velocity fans. This sits towards the middle of the price range, but seems to fit in more with the cheaper priced fans. I'm very curious to compare this side by side to some others, because I don't think there's any incentive to pay 50+ dollars more for this over a cheaper model from a different brand.
The initial checkout of a Lasko 20" High Velocity Max Performance Fan model H20301. I've been very curious about these fans for many years but could never rationalize the rather lofty retail price they go for. I can however, rationalize a few dollars at the thrift store.
I've heard a lot of mixed things about these, some people say they're great, some people say they're awful, some people say they're loud. I had no idea what to expect. This was my first time using one of these in person and this was my raw reaction.
I, somewhat surprisingly, thing this is a pleasant surprise. There's nothing exceptional about it, but there's nothing really wrong with it either, besides the stupid blade. The physical form factor is nice, I like the switch in the front and the guard comes apart for easy cleaning without needing to detach from the stand. It appears to be the same style motor used in the rest of Lasko's fans which are generally reliable if kept clean and are easy to service. Performance is relatively average; it's not quite as powerful as I was expecting, but it is dirty. Noise level is also average, not very quiet but not unreasonably loud for this style fan either.
The only major failure point in this unit is the blade. The blade design is absolute trash. The ends of the blade move no air, you're really only getting about 17" of surface area moving air on this thing, so it's very bulky for nothing. This seems to be a failure point in a lot of Lasko fans. Lasko seriously needs to put a lot more R&D into aerodynamics and come out with some new blades that work better. These stink.
What I get hung up on with this unit is the value. While many Lasko fans leave a lot to be desired, I feel like they're a good value when considering the price. Unlike with the box fans, there's a fair bit of market competition with high velocity fans. This sits towards the middle of the price range, but seems to fit in more with the cheaper priced fans. I'm very curious to compare this side by side to some others, because I don't think there's any incentive to pay 50+ dollars more for this over a cheaper model from a different brand.








![Quiet, High Efficiency Box fan Build from Scrap Parts | Performance Analysis and Review
Most of the box fans you can buy today arent very good. Some are a decent value considering how inexpensive they are, but they objectively leave a lot to be desired.
Many models such as the Lasko lineup havent changed much in the last 2+ decades. Similar blades, similar motors, similar, guards, etc.. They seem to perform worse and worse every year as manufacturing costs are cut more and more. It really shouldnt be difficult to build a good fan at this point, these companies are just opting not to. Many of them like Lasko dont have to; the name is known, it has a market monopoly, the stuff is cheap, so it sells just because it exists.
I asked myself the question, Can I build a better box fan than most of whats on the market today just using random scrap parts I have around the shop?, and unfortunately for whats on the market today, the answer was yes.
I combined a blade set that I bought many years ago for experimentation with a motor out of a busted air filter and put it into an old box fan frame that another collector used for parts. To little surprise, we came up with a build thats substantially better in most all respects than the majority of the models you can buy today.
This is an objectively very good box fan, aside from obvious physical issues like the potential to tilt backwards on high. It makes a reasonable amount of noise for the air moved, it doesnt use a lot of power, the air carries well, and it has a good range in speeds making the use cases very versatile.
Im not sure what speed this blade is designed for, but it does seem like were exceeding where it works best at. There appears to be a point of diminishing returns where the distance the air pushed increases very little for much higher RPMs, power consumption, noise, and reduction in efficiency.
With a few issues aside, Id consider this a generally decent fan. Its quite abysmal that we could cobble something together with mis-matched parts from various sources and come up with something superior to most of whats mass produced today. The current box fan market is really in quite a sad state of existence...
The specifications measured during the video are as followed, represented as [Loudness (dBA) / Power (watts) / Current (amps) / Air Movement Volume (CFM) / Efficiency (CFM/watt) / Air Flow Velocity in MPH at 0 / 5 / 10].
Low: [46 / 41 / 0.34 / 1,073 / 26 / 9 / 6 / 4].
Medium: [56 / 65 / 0.55 / 1,432 / 22 / 12.5 / 7 / 5].
High: [61 / 118 / 0.98 / 1,764 / 15 / 15 / 9 / 6]. Quiet, High Efficiency Box fan Build from Scrap Parts | Performance Analysis and Review](https://i.ytimg.com/vi/Kt0AvlW46rM/mqdefault.jpg)

