Uploaded October 2026 | Updated November 2026, 2 days ago
The initial checkout of a pair of SMC 12" oscillating table fans model TR-12. The units date back to the early 2000s, these 2000 and 2002.
I acquired both of these units at the thrift store on the same day. While it's not inconceivable that 2 happened to be donated that week, I'd expect under those circumstances the units to have come from the same household. Aside from being together, they don't really seem to have come from the same owner. The cleanliness of the fans is different, the type of dirt on them is different, and the yellowing patters are different. They seem to be products of different environments.
Most oddly, the motor inside the cleaner fan is filthy, while the motor of the filthy one is relatively clean. And in typical fashion, the dirty, more heavily used one seems to run better.
These SMC oscillating fans from the 2000s are very nostalgic to me. I have more nostalgia to the TH series fans, and generally like the aesthetics better. I remember seeing these fans around as late as in the 2010s; there was a math classroom that had one of these in the front of the room.
Many of these were sold at the The Home Depot for very low prices. These were economy products, and I'd say they were overall objectively very good. They move a decent amount of air on high, have a good variance in speeds down to a quiet gentle low, and last a long time. These have steel bearings, which work very well as long as there's lubrication. Once a lubrication failure takes place, they're harder to revive than other types of bearings.
The initial checkout of a pair of SMC 12" oscillating table fans model TR-12. The units date back to the early 2000s, these 2000 and 2002.
I acquired both of these units at the thrift store on the same day. While it's not inconceivable that 2 happened to be donated that week, I'd expect under those circumstances the units to have come from the same household. Aside from being together, they don't really seem to have come from the same owner. The cleanliness of the fans is different, the type of dirt on them is different, and the yellowing patters are different. They seem to be products of different environments.
Most oddly, the motor inside the cleaner fan is filthy, while the motor of the filthy one is relatively clean. And in typical fashion, the dirty, more heavily used one seems to run better.
These SMC oscillating fans from the 2000s are very nostalgic to me. I have more nostalgia to the TH series fans, and generally like the aesthetics better. I remember seeing these fans around as late as in the 2010s; there was a math classroom that had one of these in the front of the room.
Many of these were sold at the The Home Depot for very low prices. These were economy products, and I'd say they were overall objectively very good. They move a decent amount of air on high, have a good variance in speeds down to a quiet gentle low, and last a long time. These have steel bearings, which work very well as long as there's lubrication. Once a lubrication failure takes place, they're harder to revive than other types of bearings.




![Blade Swap | Lasko B20540 Power Plus Box Fan and Lasko H20301 High Velocity Fan
Blade swap between the Lasko B20540 Power Plus box fan and the Lasko H20301 High Velocity fan. Very interesting results I was not expecting.
The petal blade from the box fan seemed to put more load on the HV fans motor than the default blade. There was enough of an increase in drag to create better speed variance out of the motor. The petal blade was significantly quieter on all speeds, but did result in a slight reduction in air flow. I would consider it overall a better fit, the massive increase in speed variance and significant reduction in noise are both worth a slight reduction in air movement to me. The HV fan was still very powerful with the petal blade.
The box fan didnt change much at all between the two blades in any respect. Im really not sure why this is considering how much of a difference there was on the HV fan. Perhaps the limitation on the box fan is the aerodynamic design, the restrictive plastic guards paired with the round blades being inside a box with varying turbulence. A box fan without a venturi ring really is an aerodynamics disaster.
I think both of these units look pretty cool with the opposite blades, especially the PowerPlus. I think having the metal blade in that unit works very well with the marketing and probably would have had better success than that awful all metal unit Lasko sold in the 2010s for a short period of time.
The specifications recorded during the video are as follows, represented as [Power (watts) / Wind Speed Close (MPH) / Wind Speed from ~5 Away (MPH) / Air Flow (CFM) / Efficiency (CFM/watt)].
Power Plus, default blade:
Low: 71 / 8.2 / 5 / 1,073 / 15.
Medium: 87 / 10.2 / 6 / 1,321 / 15.
High: 100 / 12 / 6 / 1,460 / 14.6.
Power Plus, H20301 blade:
Low: 70 / 9 / 6 / 1,101 / 15.7.
Medium: 86 / 11 / 6 / 1,349 / 15.7.
High: 99 / 11.6 / 7 / 1,514 / 15.3.
H20301, default blade:
Low: 93 / 13 / 8 / 1,509 / 16.2.
Medium: 105 / 15 / 9 / 1,739 / 16.6.
High: 127 / 16.5 / 10 / 1,840 / 14.5.
H20301, Power Plus blade:
Low: 96 / 10 / 6 / 1,293 / 13.5.
Medium: 107 / 11.6 / 7 / 1,432 / 13.4.
High: 130 / 14.5 / 9 / 1,817 / 14. Blade Swap | Lasko B20540 Power Plus Box Fan and Lasko H20301 High Velocity Fan](https://i.ytimg.com/vi/Ga6fcIt14_M/mqdefault.jpg)





