Converting the Hallicrafters FPM-300 @N6QW
Converting the Hallicrafters FPM-300  @N6QW
Uploaded May 2024 | Updated November 2026, 10 hours ago
About 7 years ago I found a deal on eBay for a Hallicrafters FPM-300. The FPM-300 an early 1970's radio was a Hybrid with tubes in the Final Output stages. The FPM stood for fixed, portable and mobile as it had a self contained power supply that could operate from the mains or DC power.

Being polite even when new it was marginal. What I bought was a piece of junk. After a furtive attempt at resurrection -- I simply kept the Main Board (all solid state) and the S Meter. I resold everything esles and my net loss was $20.

I took the parts I had a designed a solid state QRP transceiver from the original two pieces. This is what you see in the Video.

I made this video in response to the Hackaday Lurkers who never build anything (because they can't) but seem to always pick apart what others do.

Pete N6QW
Converting the Hallicrafters FPM-300MC1496 Part3 ~ A great sounding Direct Conversion ReceiverDigital VFO/Controller for the Triton II is working!Seeed Xiao RP2040 ~ WorkingUnboxing the vacuum tube amplifier power supplyHF Scout 1st Transmitter TestsHomebrew Breadboard  40M SSB TransceiverAI Generated 6A6 Build VideoThe Hermes Lite 2.0 with openhpsdr-powersdr softwareN6QW Builds a MC1496DBM  based Direct Conversion ReceiverARC 5 Performance with the 40M Band OpenWhite Noise Tests 10M SSB
Pete Juliano |

Converting the Hallicrafters FPM-300

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER