Uploaded October 2026 | Updated November 2026, 2 days ago
Another radio fabricated at the N6QW Radio Laboratories located in Newbury Park, CA.
The unique feature of this radio includes two modules sold as kits from mostlydiyrf.com in Oregon. The two kits are the Seed Xiao/Si5351 LO and BFO Module and the 8 Pole QER Filter operating at 4.9152MHz.
The architecture is very similar to the P3ST found at www.n6qw.com. The radio uses a lot of SMD parts which is a challenge in itself. I checked into the west coast noontime net on 7.204 MHz and was heard in Sacramento running 5 watts and covering a distance in excess of 400 miles. The report was 5X9 and excellent audio.
The IF Module and Rx RF Amp/Tx Pre-driver use a BFR106 (SMD) and the mic amp a 2N3904 also SMD. The product detector/balanced modulator and Rx/Tx mixer stages use the ADE-1. The audio output stage is a small, packaged module. The Driver is a 2N2219A and the final is an IRF510. Relay steering is extensively used throughout the topology.
This type of project is not for all hams but demonstrates a radio that can be used for POTA and with the N6QW Digital Adapter can operate FT-8.
Them that know... do!
73's
Pete N6QW
Another radio fabricated at the N6QW Radio Laboratories located in Newbury Park, CA.
The unique feature of this radio includes two modules sold as kits from mostlydiyrf.com in Oregon. The two kits are the Seed Xiao/Si5351 LO and BFO Module and the 8 Pole QER Filter operating at 4.9152MHz.
The architecture is very similar to the P3ST found at www.n6qw.com. The radio uses a lot of SMD parts which is a challenge in itself. I checked into the west coast noontime net on 7.204 MHz and was heard in Sacramento running 5 watts and covering a distance in excess of 400 miles. The report was 5X9 and excellent audio.
The IF Module and Rx RF Amp/Tx Pre-driver use a BFR106 (SMD) and the mic amp a 2N3904 also SMD. The product detector/balanced modulator and Rx/Tx mixer stages use the ADE-1. The audio output stage is a small, packaged module. The Driver is a 2N2219A and the final is an IRF510. Relay steering is extensively used throughout the topology.
This type of project is not for all hams but demonstrates a radio that can be used for POTA and with the N6QW Digital Adapter can operate FT-8.
Them that know... do!
73's
Pete N6QW










