Controlling Nixie Tubes using I2C @smbakeryt

Controlling Nixie Tubes using I2C @smbakeryt

Uploaded November 2014 | Updated September 2026, 3 weeks ago

I wire up some Nixie Tubes using an I2C IO expander and control them via a Raspberry Pi. See my electronics blog at smbaker.com or my kickstarter project at kickstarter.com/projects/1555102420/nixie-tube-calculator.

Controlling Nixie Tubes using I2C

Z80 retrocomputing 15 - CP/M on RC2014 Revisited, Using RomWBW

Convergent NGEN Part 4 - 286, 386, Ethernet, SCSI, Tape, and more!

A modern Single-Board Olivetti M20 Clone, another Z8000 computer

Eico 430 Oscilloscope - 1950s Tube Era Oscilloscope

8-bit ISA EMS board / Flash Rom Board

IN-12 Nixie Tube Clock powered by a Parallax Propeller

Kraft / Tandy Deluxe Joystick Repair & Game Card Setup

Bubble Memory Part 2: Single-Board Bubble Computer and my return to the RC2014

Mooshimeter Review and Disassembly

Converting a Seeburg Wallbox, Part 2

HDMI on the TRS-80 Color Computer 2 (COCO2) Vintage Computer

Controlling Nixie Tubes using I2C