Uploaded October 2026 | Updated November 2026, 3 days ago
Cleaning, servicing, and repairing a Holmes 16" oscillating stand fan model HASF-1516. This is one of the better stand fans that was available during the 2010s, which is surprising since Holmes is not known for aerodynamically correct, good performing designs.
This unit was high hours and caked with dust. Part of the oscillation linkage was damaged, rendering the oscillation feature completely dysfunctional. The blade hub screw is also missing, which seems to be a common issue with these fans, but this turned out to be a non-issue.
The unit was fully disassembled and dishwasher-safe parts were washed inside the machine. The blade, stand, and motor housing cover were washed manually in the sink. The motor was disassembled and all dust cleaned out. One of the tie wraps was replaced on the windings. The bearings were cleaned and re-lubricated. The shaft was cleaned, polished, and re-lubricated. The oscillating linkage was repaired with hot glue.
This unit cleaned up really well. It looks and runs like new after the service and will likely provide many years of reliable service to come.
Cleaning, servicing, and repairing a Holmes 16" oscillating stand fan model HASF-1516. This is one of the better stand fans that was available during the 2010s, which is surprising since Holmes is not known for aerodynamically correct, good performing designs.
This unit was high hours and caked with dust. Part of the oscillation linkage was damaged, rendering the oscillation feature completely dysfunctional. The blade hub screw is also missing, which seems to be a common issue with these fans, but this turned out to be a non-issue.
The unit was fully disassembled and dishwasher-safe parts were washed inside the machine. The blade, stand, and motor housing cover were washed manually in the sink. The motor was disassembled and all dust cleaned out. One of the tie wraps was replaced on the windings. The bearings were cleaned and re-lubricated. The shaft was cleaned, polished, and re-lubricated. The oscillating linkage was repaired with hot glue.
This unit cleaned up really well. It looks and runs like new after the service and will likely provide many years of reliable service to come.










