Christmas 2026 | Pair of Vintage Blow Mold Candles with Salt and Sand Freakshow @JordanU
Christmas 2026 | Pair of Vintage Blow Mold Candles with Salt and Sand Freakshow  @JordanU
Uploaded October 2026 | Updated November 2026, 3 days ago
I've been wanting to find some more large blow mold candles for a while now but haven't come across any at a reasonable price. These are becoming rather sought after and can easily fetch 50-75 dollars for a pair, or individual for lesser common ones in good condition.

I ran out of salt last week but had a small backup container in the cabinet. When I opened the cabinet to get it out for preparing dinner, it fell out of the cabinet and dumped all over the kitchen, leaving not a single grain for dinner. This prompted a dedicated trip to the grocery store, and consequently, the thrift store. These were purchased within a few hours of being put out; had the salt not spilled and I gone that day, they probably would have sold within 24 hours.

The previous owner filled the bottom of the units with sand bags and rocks. While I can understand why someone would do this if the candles are used outside, this made them very difficult to carry through the store and proceeded to make a total mess in the studio during the checkout. I will be using these indoors, so I have no need for the extra weight.

I would take a guess and say these were made by the General Foam Plastics (GPF) Company, but I am not completely certain. Perhaps someone who is more familiar with these can provide an age and brand. I suspect these date back to the 1970s or 1980s. I think these were a mid-tier model in the sense that there were more plain designs availbe, but there were also fancier ones.

These are both in decent condition considering the age with no physical damage besides a small crack in one of the 'flames'. the red portion of the paint could use some help, it looks like someone tried to (poorly) perform some touchups at some point, but probably made it works than better.

The units came with a General Electric 25-watts soft white incandescent light bulb, one of which works. The 25-watts brightness is a good fit for these. These are a rare application where I would consider using a good quality LED / DEL bulb to reduce heat exposure of the plastic. Perhaps one of those flicker flame ones would have an interest effect inside.
Christmas 2026 | Pair of Vintage Blow Mold Candles with Salt and Sand FreakshowFans Running 11/4/2026Vtech 2650 2.4 GHz DSS Dual Handset Cordless Phone with Digital Answering System | Initial CheckoutDuck Telephone | Initial CheckoutUniden DXAI5688 5.8 GHz Cordless Telephone with Digital Answering System | Initial CheckoutSMC T52 Emperor Ceiling Fan Repair | Remove Spoiled Bearings1999 Whirlpool ACQ102XH 10,200 BTU Air Conditioner with Original Box | Initial CheckoutSylvania Living Spaces 60w CFLsChristmas 2026 | Candy Cane Silhouette Checkout and RepairClean and Service Sunbeam (Holmes) SWF2000 7 Twin Window FanChristmas 2026 | Stupid DEL Icicles That Dont Even WorkApril Fools 2026 | Crushing the Worst Fan Ever!!!!!!!!!!!!1 Lakewood 1200A Trash Oscillating Fan
Jordan U |

Christmas 2026 | Pair of Vintage Blow Mold Candles with Salt and Sand Freakshow

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER