Uploaded October 2026 | Updated November 2026, 3 days ago
Poorly installing an SMC T-52 Emperor style ceiling fan after attempting a repair on the windings that were damaged from putting the blade screws in without the blades in place.
The unit ran for a little over an hour on high with no change in current or power consumption. The thermal rise above ambient seemed reasonable. I'll perform this test a few more times to give it some thermal cycles to make sure no problems appear, but I think at this point we can call the repair successful and I will proceed with replacing the bearings.
Poorly installing an SMC T-52 Emperor style ceiling fan after attempting a repair on the windings that were damaged from putting the blade screws in without the blades in place.
The unit ran for a little over an hour on high with no change in current or power consumption. The thermal rise above ambient seemed reasonable. I'll perform this test a few more times to give it some thermal cycles to make sure no problems appear, but I think at this point we can call the repair successful and I will proceed with replacing the bearings.










