Uploaded October 2026 | Updated November 2026, 3 hours ago
Testing the Receiver (after some refinements) and initial Transmitter Tests
Reference: jessystems.com/morexcvrs.html for circuit information.
Noteworthy: There is no Receiver RF Amp stage and so the Rx tends to have less background noise with no signal present. I may just run it this way. With headphones, the in the mud signals are readable
The transmit tests are also with amplification straight out of the 1st IF amp stage and after the Band Pass filter. The pattern is symmetrical. About a 100 Millivolts PTP or about 25 microwatts. How is that for QRPppp.
BTW VFO A boots up to 7.2 MHz LSB and VFO B boots up to 7.074 USB. Both VFO's have VFO Memory. Switching between VFO's each maintains the last frequency!
73's
Pete N6QW
Testing the Receiver (after some refinements) and initial Transmitter Tests
Reference: jessystems.com/morexcvrs.html for circuit information.
Noteworthy: There is no Receiver RF Amp stage and so the Rx tends to have less background noise with no signal present. I may just run it this way. With headphones, the in the mud signals are readable
The transmit tests are also with amplification straight out of the 1st IF amp stage and after the Band Pass filter. The pattern is symmetrical. About a 100 Millivolts PTP or about 25 microwatts. How is that for QRPppp.
BTW VFO A boots up to 7.2 MHz LSB and VFO B boots up to 7.074 USB. Both VFO's have VFO Memory. Switching between VFO's each maintains the last frequency!
73's
Pete N6QW










