A Channelized 40M Radio @N6QW
A Channelized 40M Radio  @N6QW
Uploaded May 2025 | Updated September 2026, 1 week ago
It started innocently enough as I lifted the ST7735 Color TFT from a little used channelized 60M SSB Transceiver. This particular rig built some 5 years ago was intended to take advantage of the 60M Band by using a channel selector for the authorized 5 channels. The 60M band was like the 44DD YL -- looked pretty dam good but pretty shallow once you tuned the band.

Once I got the 3.2-inch ILI9341 Color TFT for the JF3HZB it was time to return the ST7735. But then I thought why not remake this rig into a 40M Channelized rig with a Clarifier.

I have been successful in my quest and this video is the "Proof of Life". The 40M band has pretty much turned into a channelized band and you get to pick the channels. I kept the original 5 Position switch, but a 12 Position switch would let you zip on through the whole band. The Clarifier in essence gives you the full band coverage.

I needed to additionally change the Band Pass Filter (unsoldered two caps) and add a new LPF.

The whole thrust is a portable and compact rig.

Pete N6QW
A Channelized 40M RadioThe Multi ELMAC PMR6A Receiver ~ It is AliveScout Test Two   More Evaulation with the Si5351Mouse Tuning KnobHam Radio Techie TalkThe Yaesu FT dx 100 , A rig from 1967Homebrew Ham Radio... For the very small percentage who can do stuff.Model 540 Final IntegrationAnother Homebrew Xtal Filter ~ 4.9152 MHz for use in the PeashooterN6QWs HF SSB Scout on FT8RADIG V 3, A new approach to a Homebrew SDR TransceiverAnother Homebrew 20M SSB Transceiver de N6QW
Pete Juliano |

A Channelized 40M Radio

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER