Uploaded September 2014 | Updated November 2026, 3 hours ago
Click here to see this product on Fibreglast.com:
goo.gl/MPBCy7—Create Accurate Prototypes and Patterns
This dark brown, hard styling clay is workable at 135°F and is hard at, or below, room temperature. It offers a number of unique advantages:
Y2-Klay is 30% to 40% lighter than other industrial styling clay, so models are easier to move and handle.
Y2-Klay is resistant to shrinking and cracking, holds excellent surface detail, and can be milled or shaped with tools.
Its sulfur-free, low-odor, non-toxic formula makes for safer working conditions.
Final clay forms made with Y2-Klay can be used as a plug, impression mold, or as a male or female mold. In order to use Y2-Klay as a mold-making material, the clay surface needs to be primed or top coated. To prepare the clay surface, spray three mist coats of PVA directly onto the clay. Once the PVA has dried to a film, #1041 Duratec Gray Surfacing Primer or Tooling Gel Coat can be sprayed over the PVA to obtain a proper mold surface.
PLEASE NOTE: If Y2-Klay is used as a mold-making material, the original clay form will likely be destroyed.
Click here to see this product on Fibreglast.com:
goo.gl/MPBCy7—Create Accurate Prototypes and Patterns
This dark brown, hard styling clay is workable at 135°F and is hard at, or below, room temperature. It offers a number of unique advantages:
Y2-Klay is 30% to 40% lighter than other industrial styling clay, so models are easier to move and handle.
Y2-Klay is resistant to shrinking and cracking, holds excellent surface detail, and can be milled or shaped with tools.
Its sulfur-free, low-odor, non-toxic formula makes for safer working conditions.
Final clay forms made with Y2-Klay can be used as a plug, impression mold, or as a male or female mold. In order to use Y2-Klay as a mold-making material, the clay surface needs to be primed or top coated. To prepare the clay surface, spray three mist coats of PVA directly onto the clay. Once the PVA has dried to a film, #1041 Duratec Gray Surfacing Primer or Tooling Gel Coat can be sprayed over the PVA to obtain a proper mold surface.
PLEASE NOTE: If Y2-Klay is used as a mold-making material, the original clay form will likely be destroyed.










