Vacuum Bagging Materials Overview: Film, Peel Ply & Release Film @fibreglast
Vacuum Bagging Materials Overview: Film, Peel Ply & Release Film  @fibreglast
Uploaded September 2014 | Updated November 2026, 2 days ago
Vacuum bagging materials create pressure on a composite part during cure by sealing it from the air and pulling vacuum. In this overview, Steve from Fibre Glast explains what vacuum bagging is and what each vacuum bagging material does.

#VacuumBagging #VacuumBaggingMaterials #CompositeFabrication

Vacuum Bagging Starter Kit: fibreglast.com/products/vacuum-bagging-starter-kit-02227-a
Polyethylene Bagging Film: fibreglast.com/products/polythylene-bagging-film-3577
More vacuum bagging supplies: fibreglast.com/collections/vacuum-bagging

Vacuum Bagging Film, Peel Ply, and Sealant Tape are essential for any vacuum bagging system. Fibre Glast offers a wide selection of professional grade vacuum bagging materials, release films, breather and bleeder fabrics, peel plys and tapes to meet your various needs. If you aren't sure what to buy for your lamination, feel free to view the Vacuum Bagging Equipment & Techniques whitepaper or watch the Vacuum Bagging Materials Videos.

WHAT YOU'LL LEARN
• The two goals of vacuum bagging: eliminating trapped air that can cause delamination, and removing excess resin for a better fiber to resin ratio (the target for most parts is about 50/50)
• Bagging film: the outermost layer that creates the airtight seal, chosen by stretch and cure temperature, plus sealant tape
• Release film and peel ply: let the part pull away from the bag, with peel ply leaving a uniform surface texture
• Breather and bleeder: controls air flow and captures excess resin
• Flash tape: secures materials in the bag and releases cleanly at higher cure temperatures

WHO THIS IS FOR
Composite fabricators and builders choosing vacuum bagging materials for a project.

CHAPTERS
0:00 Introduction: Vacuum Bagging Materials at Fibre Glast
0:13 What Vacuum Bagging Is and How It Works
0:30 Two Goals: Remove Trapped Air and Excess Resin
0:51 Better Fiber to Resin Ratio Than Hand Lay-Up
1:09 How to Choose the Right Vacuum Bagging Materials
1:28 Vacuum Bagging Film and Sealant Tape
2:23 Release Film: Low and High Temperature Options
2:45 Peel Ply for a Uniform Surface Texture
3:03 Breather and Bleeder: Air Flow and Excess Resin
3:23 Flash Tape for Securing Materials in the Bag
3:41 Who Uses Vacuum Bagging: Fabricators, Aerospace, Auto Racing
4:06 Where to Find Bagging Supplies, Pumps, Hoses, and the Learning Center

Vacuum bagging guides and free white papers in the Fibre Glast Learning Center: fibreglast.com/pages/learning-center
Vacuum Bagging Materials Overview: Film, Peel Ply & Release Film573 3 oz Style 120 Fiberglass FabricAcetoneFiberglass Tapes & Sleeves OverviewElectric Supercar Toyota Frunk Fabrication2/ Electric Z Project - How to Make a HoodPrepreg Fabrics Explained: What They Are, Benefits, and CuringCarbon / KEVLAR® Hybrid Fabrics Overview -  UpdatedKEVLAR Overview -  UpdatedFlash TapeVacuum Pumps Overview - UpdatedUSA Luge Time Lapse Part 2
Fibre Glast |

Vacuum Bagging Materials Overview: Film, Peel Ply & Release Film

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER