Uploaded December 2016 | Updated November 2026, 2 days ago
Prepreg is reinforcing fabric pre-impregnated with a resin system, ready to lay into a mold with no added resin or hardener. Steve from Fibre Glast explains why fabricators use it and what it takes to cure it.
#Prepreg #CompositeFabrication #VacuumBagging
Prepreg 3K 2x2 Twill Weave Carbon: fibreglast.com/products/prepreg-3k-2x2-twill-weave-carbon-03101
Prepreg 7781 E-Glass: fibreglast.com/products/prepreg-7781-e-glass-3100
Sunrez UV Vinyl Ester Prepreg Fabric: fibreglast.com/products/chopped-strand-mat-uv-epoxy-prepreg-fabric
All prepreg fabrics: fibreglast.com/collections/prepreg-fabrics
Prepreg fabrics have been pre-impregnated with an epoxy resin system. Fibre Glast prepregs can be handled, stored, and shipped at room temperatures. In order for the prepregs to cure, it is necessary to use a combination of pressure and heat. There are many advantages to using prepreg fabrics: nearly perfect resin content, maximum strength properties, less mess, less waste, shorter curing time, uniform properties, and better cosmetics.
To learn more about prepreg fabrics, read the free helpful white paper About Prepregs.
There are two prepreg fabrics available, the Prepreg 3K, 2x2 Twill Weave Carbon and the Prepreg 7781 E-Glass. These prepregs have a shelf life of 12 months when the maximum storage temperature does not exceed 75°F and 6 months when it does not exceed 90°F.
WHAT ELSE YOU'LL LEARN
• Why hand layup, even when vacuum bagged, ends up with excess resin
• How prepregs ship between layers of backing film, and why they don't need to be frozen
• What curing requires: an oven or autoclave plus vacuum bagging materials, with a temperature ramp up and ramp down
• How prepreg costs compare with dry fabric, and where fabricators use it, from aerospace and racing to sporting goods and pressure vessels
WHO THIS IS FOR
Fabricators with hand layup and vacuum bagging experience. A beginner can tackle a prepreg project, but experienced fabricators use it most.
CHAPTERS
0:00 Prepreg Fabric Overview: Pre-Impregnated Resin System
0:30 Perfect Resin Content vs. Hand Layup
0:59 Five Prepreg Fabric Styles and Backing Film
1:24 Room Temperature Storage: No Freezing Needed
1:47 What You Need to Cure Prepreg: Heat, Pressure, Vacuum Bagging
2:11 Skill Level and the Cure Cycle: Temperature Ramp Up and Down
2:28 Prepreg Cost vs. Dry Fabric, Resin, and Hardener
2:49 Where Prepreg Is Used: Aerospace, Racing, Sporting Goods, Pressure Vessels
Vacuum bagging guides and free white papers in the Fibre Glast Learning Center: fibreglast.com/pages/learning-center
Prepreg is reinforcing fabric pre-impregnated with a resin system, ready to lay into a mold with no added resin or hardener. Steve from Fibre Glast explains why fabricators use it and what it takes to cure it.
#Prepreg #CompositeFabrication #VacuumBagging
Prepreg 3K 2x2 Twill Weave Carbon: fibreglast.com/products/prepreg-3k-2x2-twill-weave-carbon-03101
Prepreg 7781 E-Glass: fibreglast.com/products/prepreg-7781-e-glass-3100
Sunrez UV Vinyl Ester Prepreg Fabric: fibreglast.com/products/chopped-strand-mat-uv-epoxy-prepreg-fabric
All prepreg fabrics: fibreglast.com/collections/prepreg-fabrics
Prepreg fabrics have been pre-impregnated with an epoxy resin system. Fibre Glast prepregs can be handled, stored, and shipped at room temperatures. In order for the prepregs to cure, it is necessary to use a combination of pressure and heat. There are many advantages to using prepreg fabrics: nearly perfect resin content, maximum strength properties, less mess, less waste, shorter curing time, uniform properties, and better cosmetics.
To learn more about prepreg fabrics, read the free helpful white paper About Prepregs.
There are two prepreg fabrics available, the Prepreg 3K, 2x2 Twill Weave Carbon and the Prepreg 7781 E-Glass. These prepregs have a shelf life of 12 months when the maximum storage temperature does not exceed 75°F and 6 months when it does not exceed 90°F.
WHAT ELSE YOU'LL LEARN
• Why hand layup, even when vacuum bagged, ends up with excess resin
• How prepregs ship between layers of backing film, and why they don't need to be frozen
• What curing requires: an oven or autoclave plus vacuum bagging materials, with a temperature ramp up and ramp down
• How prepreg costs compare with dry fabric, and where fabricators use it, from aerospace and racing to sporting goods and pressure vessels
WHO THIS IS FOR
Fabricators with hand layup and vacuum bagging experience. A beginner can tackle a prepreg project, but experienced fabricators use it most.
CHAPTERS
0:00 Prepreg Fabric Overview: Pre-Impregnated Resin System
0:30 Perfect Resin Content vs. Hand Layup
0:59 Five Prepreg Fabric Styles and Backing Film
1:24 Room Temperature Storage: No Freezing Needed
1:47 What You Need to Cure Prepreg: Heat, Pressure, Vacuum Bagging
2:11 Skill Level and the Cure Cycle: Temperature Ramp Up and Down
2:28 Prepreg Cost vs. Dry Fabric, Resin, and Hardener
2:49 Where Prepreg Is Used: Aerospace, Racing, Sporting Goods, Pressure Vessels
Vacuum bagging guides and free white papers in the Fibre Glast Learning Center: fibreglast.com/pages/learning-center










