Capacity Test of the Tower of Power @DavidPozEnergy
Capacity Test of the Tower of Power  @DavidPozEnergy
Uploaded February 2020 | Updated September 2026, 23 hours ago
Testing the tower of power for capacity.
I was able to pull 24.37 kwh from the battery. I started with the cells at 3.5 volts, and ended the test when the first cell reached 2.5 volts. Maximum voltage for these cells is 3.65 volts per cell, but they float less than that.

This works out to 3.05 kwh per module. At least in my test. It's possible I might be able to do a little better with some more tweaking, maybe. But I'm going to concentrate on other projects for now and be happy with my 24 kwh.

Check out some of the links below if you would like to help support the channel.

Battery Hookup. Use coupon code "davidpoz" for 10% off any purchase.
batteryhookup.com/?rfsn=3333666.ca06e9

Amazon affiliate links:
Watt Meter: amzn.to/2SilQRC

“As an Amazon Associate I earn from qualifying purchases.”

patreon.com/DavidPoz

facebook.com/DavidPozEnergy
Capacity Test of the Tower of PowerOff Grid Farm, Solar, SimpliPhi Lithium, Outback Radian InstallationCompact and powerful, Bluetti Apex 300 TestingWater Heater Diversion Load and Capacity TestMore Efficient than ever!  Alternator Generator fine tuning, Part 3Finally!  Its all coming together.  Lithium BatteriesFull Load Test and Making a Neutral with an Auto Transformer, Growatt Inverter Review, Part2DIY Hybrid battery, Jump pack and Solar in oneRound Trip Efficiency Test on LTO SCIB Battery, Lithium TitanateFast ROI Solar InstallationSandblast and Painting Utility Trailer from CamperDIY Jump Starting Battery for Military Equipment
DavidPoz |

Capacity Test of the "Tower of Power"

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER