Uploaded October 2026 | Updated November 2026, 5 days ago
If you’re just joining in, this is part 6 of building a DIY go-kart belt grinder. Today I’m working on the lower frame mount, which supports the horizontal work rest that holds your material while you grind. It looks complicated, but the fixture map makes it simple. Since I welded this assembly vertically, I used 13" tall risers to keep the material plumb and give the clamps more leverage. I swapped the 6" tooth blocks for a 5" double-wide tooth block and riser, which leaves more room for future setups.
Then the Fireball Double Dragon clamp went to work. It pushes down or from the side, and on this one I wanted upward pressure. It turns out the fixtures make a pretty cool musical instrument, too.
Tomorrow I'm making a small part with a really big job, the flexure. Without it, the belt would walk right off the wheel.
If you want to build this grinder and follow along, the plans are available at Fireballtool.com
#fireballtool #tools #fabrication #grinding #diy #diyprojects #motor #metal #gokart #drill #fixtures
If you’re just joining in, this is part 6 of building a DIY go-kart belt grinder. Today I’m working on the lower frame mount, which supports the horizontal work rest that holds your material while you grind. It looks complicated, but the fixture map makes it simple. Since I welded this assembly vertically, I used 13" tall risers to keep the material plumb and give the clamps more leverage. I swapped the 6" tooth blocks for a 5" double-wide tooth block and riser, which leaves more room for future setups.
Then the Fireball Double Dragon clamp went to work. It pushes down or from the side, and on this one I wanted upward pressure. It turns out the fixtures make a pretty cool musical instrument, too.
Tomorrow I'm making a small part with a really big job, the flexure. Without it, the belt would walk right off the wheel.
If you want to build this grinder and follow along, the plans are available at Fireballtool.com
#fireballtool #tools #fabrication #grinding #diy #diyprojects #motor #metal #gokart #drill #fixtures










