Uploaded October 2026 | Updated November 2026, 3 hours ago
I have a pair of Series 30 drives that need to both be connected together and linked to the host controller, the 8230 Disk controller in the Four-Phase Systems, model IV/70 computer. The cables are not easy to come by 50 years later and they aren't just normal ribbon cables terminating at *very* annoying Winchester connections. If you look in the Diablo documentation it is very specific about what type of cable to use, to the point it advises against using other specialty cable types.
Well at VCF West this year, some of the correct cable appeared in the free pile. It was used and dirty (much like my fingernails, for those who complain about that in videos) but still very much reusable. In this video I'll make myself a set and tackle the extra weirdness that is the copper shielding it uses.
During the video we see a set of neat adapters that convert the very expensive Winchester plugs and sockets into more easy to source IDC ribbon headers for both the cabling and drive termination. You can find the gerbers and information on these in the github page for the RK05 emulation project.
github.com/G-Wiley/RK05_Emulator_Tester_System_v2/tree/main/Diablo_Adapters
For those who wish to read more of the Diablo 30's maintenance manual, thanks to Al Kossow you can find it here - bitsavers.trailing-edge.com/pdf/diablo/disk/model_30/81503-02_Series_30_Disk_Drive_Maintenance_Nov75.pdf
Remember to follow me on Bluesky at "@CelGen.org" to keep up to date on what I am doing and what might be happening in the next video.
I have a pair of Series 30 drives that need to both be connected together and linked to the host controller, the 8230 Disk controller in the Four-Phase Systems, model IV/70 computer. The cables are not easy to come by 50 years later and they aren't just normal ribbon cables terminating at *very* annoying Winchester connections. If you look in the Diablo documentation it is very specific about what type of cable to use, to the point it advises against using other specialty cable types.
Well at VCF West this year, some of the correct cable appeared in the free pile. It was used and dirty (much like my fingernails, for those who complain about that in videos) but still very much reusable. In this video I'll make myself a set and tackle the extra weirdness that is the copper shielding it uses.
During the video we see a set of neat adapters that convert the very expensive Winchester plugs and sockets into more easy to source IDC ribbon headers for both the cabling and drive termination. You can find the gerbers and information on these in the github page for the RK05 emulation project.
github.com/G-Wiley/RK05_Emulator_Tester_System_v2/tree/main/Diablo_Adapters
For those who wish to read more of the Diablo 30's maintenance manual, thanks to Al Kossow you can find it here - bitsavers.trailing-edge.com/pdf/diablo/disk/model_30/81503-02_Series_30_Disk_Drive_Maintenance_Nov75.pdf
Remember to follow me on Bluesky at "@CelGen.org" to keep up to date on what I am doing and what might be happening in the next video.










