Building an expansion cloud chamber from scratch - Part 4 @Marbslab

Uploaded July 2023 | Updated September 2026, 1 day ago

#cloudchamber
Making the invisible visible - build your own expansion cloud chamber with basic tools and off-the-shelf components.
Part 1: youtube.com/watch?v=_cF2A0t1L1k
Part 2: youtube.com/watch?v=mk58B-Yxln8
Part 3: youtube.com/watch?v=0hJIDPrhcYM

Building an expansion cloud chamber from scratch - Part 4

Iodoform - Synthesis and antiseptic properties

Making azobenzene, a photoswitchable chemical compound #Azobenzene

Building a small, fully automatic Birkeland-Eyde experimental reactor

Building a Hamamatsu phototube flame scanner

$Powering a Geissler tube by hand #wimshurst #geissler #helium In this video, I show you how to operate a Geissler tube with a Wimshurst machine. The Wimshurst machine is from AliExpress, and the Geissler tube is from eBay. Geissler tubes are filled with various gases at low pressure, with metal electrodes at each end. A high voltage of several thousand volts is applied between the electrodes. The high voltage ionizes the gas, causing it to give off light by fluorescence in a glow discharge. The color of the light depends on the gas used. To give it a vintage look, I made a new base from lime wood and tube holders from turned wood. I also made the brass wire connections myself and paid attention to other historical details. My Geissler tube is filled with helium. I checked this with a diffraction grating by looking at the spectral lines.$

Experimental determination of Plancks constant using LEDs

Marbs lab |

Building an expansion cloud chamber from scratch - Part 4