Building an immersion photometer @Marbslab

Uploaded September 2025 | Updated September 2026, 4 days ago

#Photometer #Immersionphotometer #BriggsRauscher
In this video, I show you how I built an immersion photometer and used it to analyze the Briggs-Rauscher reaction.
Design files can be found here: github.com/Marbslab/Immersion-photometer
Cross-platform serial monitor/plotter: github.com/hacknus/serial-monitor-rust

Building a small, fully automatic Birkeland-Eyde experimental reactor

Building a Hamamatsu phototube flame scanner

$Powering a Geissler tube by hand #wimshurst #geissler #helium In this video, I show you how to operate a Geissler tube with a Wimshurst machine. The Wimshurst machine is from AliExpress, and the Geissler tube is from eBay. Geissler tubes are filled with various gases at low pressure, with metal electrodes at each end. A high voltage of several thousand volts is applied between the electrodes. The high voltage ionizes the gas, causing it to give off light by fluorescence in a glow discharge. The color of the light depends on the gas used. To give it a vintage look, I made a new base from lime wood and tube holders from turned wood. I also made the brass wire connections myself and paid attention to other historical details. My Geissler tube is filled with helium. I checked this with a diffraction grating by looking at the spectral lines.$

Experimental determination of Plancks constant using LEDs

Building a replica of Faradays generator

My pill dispenser robot - Hackaday Prize 2023 finalist