Uploaded February 2024 | Updated September 2026, 2 weeks ago
Introducing the 'B-Roll' series.
I've not a lot of time of late to work on any projects and to produce videos, so to keep in touch I've started a new series of non-narrative videos that I'm going to call 'B-Roll'.
This is the sort of thing larger channels would have a second channel for. Less edited, less produced, probably no conclusion. More behind-the-scenes, stream of conciousness type output to show what I'm working on and how without necessarily telling a story.
Feel free to go big on the thumbs down if this is not something you want more of, else expect more of these than 'main' videos for the time being.
~~~
Today I'm trying to work out what's wrong with my DSTB1. I'm working on a new SDRAM driver in the firmware and getting nowhere. I then realise my booster seems to be unpredictably unreliable in 'release' configuration having worked beautifully in the past.
What gives?
Issue report: exxosforum.co.uk/forum/viewtopic.php?p=107764#p107764
DSTB1: github.com/dh219/DSTB
YAART: atari-forum.com/viewtopic.php?t=30110
twitter.com/thetechnoshed
Introducing the 'B-Roll' series.
I've not a lot of time of late to work on any projects and to produce videos, so to keep in touch I've started a new series of non-narrative videos that I'm going to call 'B-Roll'.
This is the sort of thing larger channels would have a second channel for. Less edited, less produced, probably no conclusion. More behind-the-scenes, stream of conciousness type output to show what I'm working on and how without necessarily telling a story.
Feel free to go big on the thumbs down if this is not something you want more of, else expect more of these than 'main' videos for the time being.
~~~
Today I'm trying to work out what's wrong with my DSTB1. I'm working on a new SDRAM driver in the firmware and getting nowhere. I then realise my booster seems to be unpredictably unreliable in 'release' configuration having worked beautifully in the past.
What gives?
Issue report: exxosforum.co.uk/forum/viewtopic.php?p=107764#p107764
DSTB1: github.com/dh219/DSTB
YAART: atari-forum.com/viewtopic.php?t=30110
twitter.com/thetechnoshed









![PiStormSTE: a new PiStorm board that fits inside the STE
Kindly sponsored by PCBWay.com
PiStorm has come on leaps and bounds since I was last actively developing for the project. A new ST-specific repository has been set up by Cryptodad (on the Discord) and a lot of new work has gone in.
Weve got accelerated high-resolution, high-colour HDMI graphics, virtual hard discs, real-time clock pass-throughs and the biggest breakthrough of all, 100% ST-RAM access speeds at long last on the Pi 3+ (these have been available for a while on the Pi 4).
There are maybe some tweaks needed to firmware still, but this is getting very close to a viable daily driver.
BUT, open case machines, specialist motherboards, or relocator gymnastics have been required to use the two or three board stack.
So I thought Id do something about it. In this video I build a special STE-targetted version of the PiStorm hardware which allows a Pi3A+ or a modified (ethernet socket removed) Pi 4 to be fitted internally to the Atari STE.
Do have a look and join the PiStorm Discord if youd like in on project.
Made in KiCAD. Open source, as normal.
This project can be ordered from my PCBWay community page: https://www.pcbway.com/project/shareproject/PiStorm_STE_v1_0_df288de0.html
[[ Please note, I have specified latches rather than flipflops in this BOM as the lead time is much shorter. Through-hole components (1.27mm pin headers and 2.54mm receptacle) will need to be sourced separately and fitted yourself. ]]
PiStorm original (Amiga): https://github.com/captain-amygdala/pistorm
PiStorm-Atari (firmware & software for the Pi): https://github.com/gotaproblem/pistorm-atari
PiStormSTE (now under the PiStorm Atari repository): https://github.com/gotaproblem/pistorm-atari/tree/main/hardware/pistorm-ste
PiStorm Discord: https://discord.com/invite/j6rPtzxaNW
BBAN Solutions ST disc images: https://bbansolutions.co.uk/index.php/reviving-the-past/pistorm-atari/
~~~
PCBWay offer PCB manufacture, CNC machining, sheet metal fabrication, 3D printing and injection moulding.
Check out their community of makers here: https://www.pcbway.com/project/
~~~ PiStormSTE: a new PiStorm board that fits inside the STE](https://i.ytimg.com/vi/xtQSo7G3DBo/mqdefault.jpg)
