Uploaded November 2024 | Updated September 2026, 2 weeks ago
Kindly sponsored by https://www.PCBWay.com: PCB manufacture, CNC machining, sheet metal fabrication, 3D printing and injection moulding.
My Amiga 500 came with a heavily battery-corroded 512kB + real time clock expansion in the trapdoor.
I made such a mess of cleaning up and socketing the RAM chips that I gave up with it initially. But now I'm back.
Surely it can't get any worse.
What do you think?
YouTube.com/@thetechnoshed
twitter.com/thetechnoshed
github.com/dh219
~~~
Check out PCBWay's community of makers here: pcbway.com/project
My PCBWay Projects page: pcbway.com/project/member/?bmbno=2C89C44C-EDF4-43
Kindly sponsored by https://www.PCBWay.com: PCB manufacture, CNC machining, sheet metal fabrication, 3D printing and injection moulding.
My Amiga 500 came with a heavily battery-corroded 512kB + real time clock expansion in the trapdoor.
I made such a mess of cleaning up and socketing the RAM chips that I gave up with it initially. But now I'm back.
Surely it can't get any worse.
What do you think?
YouTube.com/@thetechnoshed
twitter.com/thetechnoshed
github.com/dh219
~~~
Check out PCBWay's community of makers here: pcbway.com/project
My PCBWay Projects page: pcbway.com/project/member/?bmbno=2C89C44C-EDF4-43



![PiStormSTE: a new PiStorm board that fits inside the STE
Kindly sponsored by PCBWay.com
PiStorm has come on leaps and bounds since I was last actively developing for the project. A new ST-specific repository has been set up by Cryptodad (on the Discord) and a lot of new work has gone in.
Weve got accelerated high-resolution, high-colour HDMI graphics, virtual hard discs, real-time clock pass-throughs and the biggest breakthrough of all, 100% ST-RAM access speeds at long last on the Pi 3+ (these have been available for a while on the Pi 4).
There are maybe some tweaks needed to firmware still, but this is getting very close to a viable daily driver.
BUT, open case machines, specialist motherboards, or relocator gymnastics have been required to use the two or three board stack.
So I thought Id do something about it. In this video I build a special STE-targetted version of the PiStorm hardware which allows a Pi3A+ or a modified (ethernet socket removed) Pi 4 to be fitted internally to the Atari STE.
Do have a look and join the PiStorm Discord if youd like in on project.
Made in KiCAD. Open source, as normal.
This project can be ordered from my PCBWay community page: https://www.pcbway.com/project/shareproject/PiStorm_STE_v1_0_df288de0.html
[[ Please note, I have specified latches rather than flipflops in this BOM as the lead time is much shorter. Through-hole components (1.27mm pin headers and 2.54mm receptacle) will need to be sourced separately and fitted yourself. ]]
PiStorm original (Amiga): https://github.com/captain-amygdala/pistorm
PiStorm-Atari (firmware & software for the Pi): https://github.com/gotaproblem/pistorm-atari
PiStormSTE (now under the PiStorm Atari repository): https://github.com/gotaproblem/pistorm-atari/tree/main/hardware/pistorm-ste
PiStorm Discord: https://discord.com/invite/j6rPtzxaNW
BBAN Solutions ST disc images: https://bbansolutions.co.uk/index.php/reviving-the-past/pistorm-atari/
~~~
PCBWay offer PCB manufacture, CNC machining, sheet metal fabrication, 3D printing and injection moulding.
Check out their community of makers here: https://www.pcbway.com/project/
~~~ PiStormSTE: a new PiStorm board that fits inside the STE](https://i.ytimg.com/vi/xtQSo7G3DBo/mqdefault.jpg)



