Uploaded May 2024 | Updated September 2026, 10 hours ago
Black Walnut off-cut rounded and I used my Wood Lathe Router Jig to run a core bit along the body to make the flutes. Drilled out the body to fit a 1/4-inch bit holder and epoxied it in place. After final shaping and sanding the I cut it free and cleaned up the end with a foam sanding pad mounted in my lathe in a Jacob’s chuck. Sanded to 400 grit then polished with Ack’s Abrasive Sanding Paste and Ack’s Polish/Restoring Paste.
Black Walnut off-cut rounded and I used my Wood Lathe Router Jig to run a core bit along the body to make the flutes. Drilled out the body to fit a 1/4-inch bit holder and epoxied it in place. After final shaping and sanding the I cut it free and cleaned up the end with a foam sanding pad mounted in my lathe in a Jacob’s chuck. Sanded to 400 grit then polished with Ack’s Abrasive Sanding Paste and Ack’s Polish/Restoring Paste.
