Automatic Aircraft Landing Introduction: Control from Glide Path to Flare Path - Section 1.6.1 @LearnGandC
Automatic Aircraft Landing Introduction: Control from Glide Path to Flare Path - Section 1.6.1  @LearnGandC
Uploaded March 2023 | Updated November 2026, 2 days ago
An automatic landing system is necessary in scenarios where the pilot's visual reference to the runway is obscured by weather or when no pilot is present to establish a landing slope. The landing system is guided by a radio transmitter that commands a desired glide path angle. The aircraft follows the glide path, but the descent rate must be reduced for a safe landing with a flare trajectory initiated at a specified altitude. This requires flight control, including simultaneous pitch and airspeed control systems. The switch from glide path to flare path must occur with minimal transients. Lessons taught in this section are applicable to other aircraft flight control scenarios. This is the first video in a series on landing guidance and control.

Access all lessons and more: learngandc.com
Get codes: patreon.com/user?u=86359827
Automatic Aircraft Landing Introduction: Control from Glide Path to Flare Path - Section 1.6.1Simulation of Proportional Navigation for an Accelerating Target (Problem Set) - Section 3 Module 4Example of 3D Proportional Navigation with Zero Effort Miss - Section 5 Module 2How to Transform the Lead/Lag Compensator into State Space Form – Quick Concepts in Control 3Lyapunov Stability and Linear Quadratic Regulator (LQR) Stability ProofAugmented vs True Proportional Navigation (3/3) - Guidance from Optimal Control - Section 2 Module 3Closed Loop Transfer Function - Quick Concepts in Controls #1X-15 Stability Augmentation System | Yar Control | 6DOF Flight Simulation Tutorial - Section 3.1Proportional Navigation Qualitative Intro - Section 2 Module 1 - Guidance FundamentalsAutomatic Turn Coordination | Adverse Yaw | Lateral Dynamics | Lateral Flight Control – Section 1.2Augmented Proportional Navigation Part 2/3 - Guidance from Optimal Control - Section 2 Module 2Robust Servomechanism Design, The Internal Model Principle, and Flight Control
Ben Dickinson |

Automatic Aircraft Landing Introduction: Control from Glide Path to Flare Path - Section 1.6.1

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER