Uploaded February 2024 | Updated September 2026, 2 weeks ago
Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT
UDPATE: Article from OpenScan addressing the discussion in the comments about whether or not this is Open Source: https://www.openscan.eu/post/is-openscan-an-open-source-project
A 3D scanning photogrammetry rig that automates image capture and post processing, for free, and open source! It sounds too good to be true, but based on my testing it’s not. After you purchase the hardware kit, everything is free.
I’m not a patient person when it comes to prep for painting or 3D scanning, so the fact that my results were impressive tells you that this product is easy to use for almost everyone.
Most of this hardware was provided free of charge by OpenScan for the purpose of making this video. It was tested in accordance with my review policy. All opinions expressed are my own. teachingtechyt.github.io/reviewpolicy.html
I was so impressed by OpenScan, I made a donation here: buymeacoffee.com/openscan
0:00 Introduction
0:50 Types of 3D scanning
3D scanning comparison video: youtu.be/n-qqaW-yjis
1:48 What is the OpenScan Mini?
OpenScan website: https://en.openscan.eu/
OpenScan GitHub: github.com/OpenScan-org
OpenScan documentation: openscan-org.github.io/OpenScan-Doc
3:02 Hardware purchasing options and unboxing
4:28 Firmware preparation
5:14 Printed parts
6:09 Assembly
6:39 First run and tour
7:42 How to achieve best results
OpenScan photogrammetry guide: openscan-org.github.io/OpenScan-Doc/photogrammetry/basics
AESUB Blue 3D scanning spray: https://core-electronics.com.au/aesub-blue-disappearing-scanning-spray.html
9:55 3D scanning workflow
Meshmixer: meshmixer.com
Meshmixer 3D scan clean up tutorial: youtu.be/i5e2S8o7Ujc
13:11 Other 3D scan results
15:37 Strengths and weaknesses
OpenScan Patreon: patreon.com/OpenScan
18:04 Conclusion
Models scanned in this video:
3DBenchy - 3dbenchy.com
Orc chief bust - myminifactory.com/object/3d-print-orc-chief-nakhbruh-118659
Nature's Wrath - Genir Ancients Bundle - myminifactory.com/object/3d-print-nature-s-wrath-genir-ancients-bundle-215848
Teaching Tech Makercoin - printables.com/model/180155-super-satisfying-two-part-maker-coin
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: patreon.com/teachingtech
Check out my 2nd channel, TT Racing: youtube.com/@ttracingYT
UDPATE: Article from OpenScan addressing the discussion in the comments about whether or not this is Open Source: https://www.openscan.eu/post/is-openscan-an-open-source-project
A 3D scanning photogrammetry rig that automates image capture and post processing, for free, and open source! It sounds too good to be true, but based on my testing it’s not. After you purchase the hardware kit, everything is free.
I’m not a patient person when it comes to prep for painting or 3D scanning, so the fact that my results were impressive tells you that this product is easy to use for almost everyone.
Most of this hardware was provided free of charge by OpenScan for the purpose of making this video. It was tested in accordance with my review policy. All opinions expressed are my own. teachingtechyt.github.io/reviewpolicy.html
I was so impressed by OpenScan, I made a donation here: buymeacoffee.com/openscan
0:00 Introduction
0:50 Types of 3D scanning
3D scanning comparison video: youtu.be/n-qqaW-yjis
1:48 What is the OpenScan Mini?
OpenScan website: https://en.openscan.eu/
OpenScan GitHub: github.com/OpenScan-org
OpenScan documentation: openscan-org.github.io/OpenScan-Doc
3:02 Hardware purchasing options and unboxing
4:28 Firmware preparation
5:14 Printed parts
6:09 Assembly
6:39 First run and tour
7:42 How to achieve best results
OpenScan photogrammetry guide: openscan-org.github.io/OpenScan-Doc/photogrammetry/basics
AESUB Blue 3D scanning spray: https://core-electronics.com.au/aesub-blue-disappearing-scanning-spray.html
9:55 3D scanning workflow
Meshmixer: meshmixer.com
Meshmixer 3D scan clean up tutorial: youtu.be/i5e2S8o7Ujc
13:11 Other 3D scan results
15:37 Strengths and weaknesses
OpenScan Patreon: patreon.com/OpenScan
18:04 Conclusion
Models scanned in this video:
3DBenchy - 3dbenchy.com
Orc chief bust - myminifactory.com/object/3d-print-orc-chief-nakhbruh-118659
Nature's Wrath - Genir Ancients Bundle - myminifactory.com/object/3d-print-nature-s-wrath-genir-ancients-bundle-215848
Teaching Tech Makercoin - printables.com/model/180155-super-satisfying-two-part-maker-coin
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Get Quality Resins from 3D Printers Online. 5% off storewide for Teaching Tech subscribers [Code: tech5]
https://3dprintersonline.com.au/
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: patreon.com/teachingtech
