Uploaded February 2026 | Updated November 2026, 1 day ago
Create intricate 3D printed decorations inspired by classic hexagon paper eggs using Autodesk Fusion. In this tutorial, you’ll build a smooth, tangent surface “orb” with lofts and patches, thicken it into printable geometry, then circular-pattern the form for a repeating decorative shell. Finally, you’ll sketch an egg profile and use Revolve plus Intersect to trim the patterned body into a clean egg shape you can 3D print.
You’ll also learn a parametric workflow so you can quickly resize the design (diameter, wall thickness, pattern count) without rebuilding everything from scratch.
Chapters
00:00 Intro: 3D printed decorations from hexagon paper eggs
00:22 Set up a diameter user parameter (200)
00:35 Sketch the base circle on a vertical plane
00:47 Construct a plane at an angle (15 degrees)
01:04 Sketch on the angled plane and add guiding lines
01:24 Add a small offset line for tangency control (2 mm)
01:44 Surface workspace: create a smooth loft
02:05 Patch top and bottom, then mirror the surface body
02:34 Thicken surfaces to 1 mm (new bodies)
03:14 Combine bodies into a single solid
03:27 Circular pattern: 12 instances to complete 360 degrees
04:06 Start the egg-shape sketch (prep for trimming)
04:25 Build the polygon guide and construction geometry
05:08 Add reference points and construction lines for the egg profile
05:51 Draw egg arcs and lock tangency and constraints
07:17 Revolve the profile and Intersect to form the egg shell
07:45 Combine and join into one printable body
08:03 Next steps: more complex patterns in a future video
What you’ll learn in Autodesk Fusion
- How to drive the design with user parameters (diameter and editable dimensions)
- A clean surface workflow: Loft, Patch, Mirror for smooth, tangent results
- Turning surfaces into printable solids using Thicken (symmetric, new body)
- How to use Combine and Circular Pattern for repeating decorative geometry
- Egg shaping with Revolve and Intersect to trim the pattern into a final form
Key settings used in the tutorial
- Diameter parameter: 200
- Plane at angle: 15 degrees
- Surface thickness: 1 mm (symmetric)
- Circular pattern count: 12 (15 degrees, mirrored to 30 degrees, 30 x 12 = 360)
Hashtags
#autodeskfusion #3dprinting #fusiontutorial
youtube.com/channel/UCmGXH-jy0o2CuhqtpxbaQgA/join
Create intricate 3D printed decorations inspired by classic hexagon paper eggs using Autodesk Fusion. In this tutorial, you’ll build a smooth, tangent surface “orb” with lofts and patches, thicken it into printable geometry, then circular-pattern the form for a repeating decorative shell. Finally, you’ll sketch an egg profile and use Revolve plus Intersect to trim the patterned body into a clean egg shape you can 3D print.
You’ll also learn a parametric workflow so you can quickly resize the design (diameter, wall thickness, pattern count) without rebuilding everything from scratch.
Chapters
00:00 Intro: 3D printed decorations from hexagon paper eggs
00:22 Set up a diameter user parameter (200)
00:35 Sketch the base circle on a vertical plane
00:47 Construct a plane at an angle (15 degrees)
01:04 Sketch on the angled plane and add guiding lines
01:24 Add a small offset line for tangency control (2 mm)
01:44 Surface workspace: create a smooth loft
02:05 Patch top and bottom, then mirror the surface body
02:34 Thicken surfaces to 1 mm (new bodies)
03:14 Combine bodies into a single solid
03:27 Circular pattern: 12 instances to complete 360 degrees
04:06 Start the egg-shape sketch (prep for trimming)
04:25 Build the polygon guide and construction geometry
05:08 Add reference points and construction lines for the egg profile
05:51 Draw egg arcs and lock tangency and constraints
07:17 Revolve the profile and Intersect to form the egg shell
07:45 Combine and join into one printable body
08:03 Next steps: more complex patterns in a future video
What you’ll learn in Autodesk Fusion
- How to drive the design with user parameters (diameter and editable dimensions)
- A clean surface workflow: Loft, Patch, Mirror for smooth, tangent results
- Turning surfaces into printable solids using Thicken (symmetric, new body)
- How to use Combine and Circular Pattern for repeating decorative geometry
- Egg shaping with Revolve and Intersect to trim the pattern into a final form
Key settings used in the tutorial
- Diameter parameter: 200
- Plane at angle: 15 degrees
- Surface thickness: 1 mm (symmetric)
- Circular pattern count: 12 (15 degrees, mirrored to 30 degrees, 30 x 12 = 360)
Hashtags
#autodeskfusion #3dprinting #fusiontutorial
youtube.com/channel/UCmGXH-jy0o2CuhqtpxbaQgA/join










