Uploaded November 2025 | Updated November 2026, 5 days ago
Running a RED KOMODO-X off a single Gold Mount battery while also powering accessories? In this video I show a safe, repeatable way to swap an Anton/Bauer Titon (Titan) Micro 150 on the RED Pro Gold Mount I/O Module without corrupting media or stressing your cables. We cover the exact shutdown order, how to prevent backfeed/connector arcing, unplugging P-Tap and USB-A to USB-C runs, and the clean power-up sequence for the camera, focus motor (Nucleus-M), and any USB-powered puck—especially when the camera’s balanced on a gimbal.
Chapters:
00:00 Intro: KOMODO-X on a single Gold Mount powering accessories
00:14 Build overview: Anton/Bauer Titon Micro 150 + RED Pro Gold Mount I/O Module
00:26 Accessory power: USB-A to USB-C puck and P-Tap to Nucleus-M focus motor
00:38 Safe shutdown: stop recording, wait for media light, power camera off
00:49 Accessory power-down: puck off, focus motor off, battery plate switch off
01:02 Unplug accessories: remove USB-A→USB-C and P-Tap leads before battery pull
01:18 Swap battery: open latch, lift pack, align nubs, click to lock, tug test
01:31 Power back up: reconnect P-Tap + USB, plate switch on, accessories on
01:43 Camera on: verify normal boot and accessory operation
Key gear mentioned:
- RED KOMODO-X
- RED Pro Gold Mount I/O Module
- Anton/Bauer Titon (Titan) Micro 150
- P-Tap (D-Tap) power lead
- USB-A to USB-C cable to a power puck
- Nucleus-M focus motor
- Gimbal setup
Why this method is safe:
- Prevents file corruption by ensuring clips close (media light goes solid)
- Avoids backfeed and connector arcing by switching the plate off before unplugging
- Protects accessories and cables by fully depowering and unplugging before the battery swap
- Maintains balance on a gimbal by staging the fresh pack and performing a quick, clean mount
If you’ve run both, drop your take on V-Mount vs Gold Mount for KOMODO-X workflows. What’s been more reliable on set for you?
Hashtags:
#REDKomodoX #GoldMount #AntonBauer #TitonMicro150 #NucleusM #PTap #CameraPower #SetTips #Cinematography #GimbalSetup
Running a RED KOMODO-X off a single Gold Mount battery while also powering accessories? In this video I show a safe, repeatable way to swap an Anton/Bauer Titon (Titan) Micro 150 on the RED Pro Gold Mount I/O Module without corrupting media or stressing your cables. We cover the exact shutdown order, how to prevent backfeed/connector arcing, unplugging P-Tap and USB-A to USB-C runs, and the clean power-up sequence for the camera, focus motor (Nucleus-M), and any USB-powered puck—especially when the camera’s balanced on a gimbal.
Chapters:
00:00 Intro: KOMODO-X on a single Gold Mount powering accessories
00:14 Build overview: Anton/Bauer Titon Micro 150 + RED Pro Gold Mount I/O Module
00:26 Accessory power: USB-A to USB-C puck and P-Tap to Nucleus-M focus motor
00:38 Safe shutdown: stop recording, wait for media light, power camera off
00:49 Accessory power-down: puck off, focus motor off, battery plate switch off
01:02 Unplug accessories: remove USB-A→USB-C and P-Tap leads before battery pull
01:18 Swap battery: open latch, lift pack, align nubs, click to lock, tug test
01:31 Power back up: reconnect P-Tap + USB, plate switch on, accessories on
01:43 Camera on: verify normal boot and accessory operation
Key gear mentioned:
- RED KOMODO-X
- RED Pro Gold Mount I/O Module
- Anton/Bauer Titon (Titan) Micro 150
- P-Tap (D-Tap) power lead
- USB-A to USB-C cable to a power puck
- Nucleus-M focus motor
- Gimbal setup
Why this method is safe:
- Prevents file corruption by ensuring clips close (media light goes solid)
- Avoids backfeed and connector arcing by switching the plate off before unplugging
- Protects accessories and cables by fully depowering and unplugging before the battery swap
- Maintains balance on a gimbal by staging the fresh pack and performing a quick, clean mount
If you’ve run both, drop your take on V-Mount vs Gold Mount for KOMODO-X workflows. What’s been more reliable on set for you?
Hashtags:
#REDKomodoX #GoldMount #AntonBauer #TitonMicro150 #NucleusM #PTap #CameraPower #SetTips #Cinematography #GimbalSetup










