Uploaded January 2026 | Updated November 2026, 5 days ago
In this Autodesk Fusion tutorial, you’ll learn how to use the Create Web feature to add internal webs and support structures inside enclosures, boxes, and other parts that need extra strength. Webs work similarly to ribs and thin extrude, but with the advantage of adapting cleanly to curved walls and updating parametrically as your model changes.
We start by creating an offset plane, sketching simple line geometry for the web layout, and then using Create Web to control thickness and extent. You’ll see how distance and “to next face” extents behave, how to switch between symmetric and one-sided thickness (including using negative values), and how flipping direction can drive webs to the top or bottom faces. Finally, we look at why this is so useful for parametric edits, especially when fillets or curved surfaces change later in the design.
If you’re building parts like organizers, bottle racks, or any enclosure that needs internal reinforcement, this workflow is a fast, reliable way to add support without manually extruding a bunch of profiles.
Chapters
00:00 What webs are and when to use them for supports
00:12 Webs vs ribs and thin extrude in Fusion
00:24 Planning a web sketch for grids and internal reinforcement
00:38 Creating an offset plane for the web sketch
00:53 Drawing web lines in a sketch (they do not need to touch)
01:07 Using Create Web and selecting sketch geometry
01:20 Setting web thickness and choosing extent type (distance)
01:31 Extending webs to meet curved walls automatically
01:42 To Next Face extents and thickness direction options
01:55 One-sided webs, symmetric thickness, and negative values
02:06 Flipping direction to drive webs to the top edge
02:32 Parametric updates when fillets and curves change
02:54 Why webs beat manual rectangles and extrudes for edits
03:08 Editing the sketch, adding more lines, and using spline webs
03:29 Extending webs to the bottom and adjusting direction
03:46 Practical use cases for supports inside enclosures
#Fusion360
#AutodeskFusion
#CADTutorial
In this Autodesk Fusion tutorial, you’ll learn how to use the Create Web feature to add internal webs and support structures inside enclosures, boxes, and other parts that need extra strength. Webs work similarly to ribs and thin extrude, but with the advantage of adapting cleanly to curved walls and updating parametrically as your model changes.
We start by creating an offset plane, sketching simple line geometry for the web layout, and then using Create Web to control thickness and extent. You’ll see how distance and “to next face” extents behave, how to switch between symmetric and one-sided thickness (including using negative values), and how flipping direction can drive webs to the top or bottom faces. Finally, we look at why this is so useful for parametric edits, especially when fillets or curved surfaces change later in the design.
If you’re building parts like organizers, bottle racks, or any enclosure that needs internal reinforcement, this workflow is a fast, reliable way to add support without manually extruding a bunch of profiles.
Chapters
00:00 What webs are and when to use them for supports
00:12 Webs vs ribs and thin extrude in Fusion
00:24 Planning a web sketch for grids and internal reinforcement
00:38 Creating an offset plane for the web sketch
00:53 Drawing web lines in a sketch (they do not need to touch)
01:07 Using Create Web and selecting sketch geometry
01:20 Setting web thickness and choosing extent type (distance)
01:31 Extending webs to meet curved walls automatically
01:42 To Next Face extents and thickness direction options
01:55 One-sided webs, symmetric thickness, and negative values
02:06 Flipping direction to drive webs to the top edge
02:32 Parametric updates when fillets and curves change
02:54 Why webs beat manual rectangles and extrudes for edits
03:08 Editing the sketch, adding more lines, and using spline webs
03:29 Extending webs to the bottom and adjusting direction
03:46 Practical use cases for supports inside enclosures
#Fusion360
#AutodeskFusion
#CADTutorial










