Aluminium Cylinder head Melt in waste oil Burner Furnace @glumpy10

Uploaded March 2015 | Updated September 2026, 6 days ago

Melting an aluminium Subaru Cylinder head in a furnace for scrap metal separation using a waste oil powered burner furnace.
Check the other Burner and Free heat Vids on my channel at youtube.com/user/glumpy10/videos

Aluminium Cylinder head Melt in waste oil Burner Furnace

Most powerful waste oil Burner, 600KW heating power!

$Making a metal melting furnace from DIY oil burner Here I use a Waste oil burner as a small aluminum furnace with crucible and directly melting in the burner itself. This setup would be ideal for DIYers who have occasional need to melt small amounts of Aluminum ( up to 10 lbs) but do not want to go to the expense of a refractory furnace or have the space for one. Using any form of waste oil WVO, WMO, ATF etc, aluminum can be melted in the burner either directly or in a crucible. The burner is made from an old 9 Kg gas bottle and is featured in my other vids. The Crucible is simply some thick wall 4 pipe with a piece of 1/4 plate welded on the bottom. The waste oil burner is running on used cooking oil but can run any other combustible liquid. The fuel is blown in by the air stream from the blower and is directed in a swirling motion around the edge of the burner. The crucible heat up quickly and the aluminum is rapidly reduced to a pourable or castable liquid. Please dont forget to click on my channel name to see a list of all my other burners and experiments.$

EASY build water heater for emergency or survival use on waste oil

Waste oil burner Downwards firing for scrapping

Oil burner setup for 600Kw Free heat output.

Oil Burner |

Aluminium Cylinder head Melt in waste oil Burner Furnace