Uploaded February 2018 | Updated November 2026, 2 days ago
Subscribe to our channel for the latest training videos, climbing tutorials and more! Snow is an incredible medium on which to travel, and often provides efficient travel conditions. In this video, we look at various aspects of climbing on snow.
Perfect spring “corn” snow that is well consolidated and soft enough to take a boot kick or ski edge, or firmer snow that takes crampon points (almost like kicking into styrofoam!), can both be fun snow climbing.
Conditions can both make and break your climbing experience. A thin layer of snow covering a talus field can be treacherous. And deep, unconsolidated powder snow, or rotten spring isothermal snow, can lead to waist-deep postholing and exhausting travel in the mountains.
Snow changes both on a seasonal level throughout the year, as well as on a diurnal cycle with cold nights and warm days.
Autumn - the mountains have the least amount of snow, and many lower elevation glaciers and talus fields are free of snow.
Winter - the snowpack starts to build as storms deposit more and more snow. Winter snow tends to be softer and less supportable, so most climbers will don skis or snowshoes. In popular winter ice climbing areas that get a lot of traffic, boot packed trails can allow access through snowy areas without the use of snowshoes or skis.
Spring - can lead to some great climbing conditions, when solar radiation and cold overnight temps combine into a melt freeze cycle that creates smooth, buttery “corn” snow. In spring, snow travel may still be better with skis and skins, assuming the objective you wish to climb has good snow coverage on the approach.
Summer - allows for “neve” snow climbing conditions, where the snow that exists becomes consolidated, and slowly melts away. Late in the summer, “suncups” can form in the snow surface. These can be less fun to deal with.
The spring diurnal cycle often makes for excellent climbing conditions overnight, or very early in the morning, when the snow surface is still frozen. Later in the morning there will be a sweet spot where the snow still holds a boot edge, but it is soft enough to ski, glissade, or boot glissade. Later in the afternoon, the warming may penetrate deep enough into the snowpack to make it “rotten,” so you post hole to your hip.
If the snow is firm or icy, crampons are the best—especially if the terrain is steep. Though crampons are more secure, they can be problematic if the snow is soft. If you notice snow balling under the bottoms of the crampons, climbing or descending snow in boots without crampons may be better—assuming you can get enough purchase (i.e. traction) with your boots.
We hope you found this video helpful.
Please remember, climbing and mountaineering are inherently dangerous. Climb at your own risk. Visit ClimbingTechTips.com for related comments, additional videos, and community feedback!
Subscribe to our channel for the latest training videos, climbing tutorials and more! Snow is an incredible medium on which to travel, and often provides efficient travel conditions. In this video, we look at various aspects of climbing on snow.
Perfect spring “corn” snow that is well consolidated and soft enough to take a boot kick or ski edge, or firmer snow that takes crampon points (almost like kicking into styrofoam!), can both be fun snow climbing.
Conditions can both make and break your climbing experience. A thin layer of snow covering a talus field can be treacherous. And deep, unconsolidated powder snow, or rotten spring isothermal snow, can lead to waist-deep postholing and exhausting travel in the mountains.
Snow changes both on a seasonal level throughout the year, as well as on a diurnal cycle with cold nights and warm days.
Autumn - the mountains have the least amount of snow, and many lower elevation glaciers and talus fields are free of snow.
Winter - the snowpack starts to build as storms deposit more and more snow. Winter snow tends to be softer and less supportable, so most climbers will don skis or snowshoes. In popular winter ice climbing areas that get a lot of traffic, boot packed trails can allow access through snowy areas without the use of snowshoes or skis.
Spring - can lead to some great climbing conditions, when solar radiation and cold overnight temps combine into a melt freeze cycle that creates smooth, buttery “corn” snow. In spring, snow travel may still be better with skis and skins, assuming the objective you wish to climb has good snow coverage on the approach.
Summer - allows for “neve” snow climbing conditions, where the snow that exists becomes consolidated, and slowly melts away. Late in the summer, “suncups” can form in the snow surface. These can be less fun to deal with.
The spring diurnal cycle often makes for excellent climbing conditions overnight, or very early in the morning, when the snow surface is still frozen. Later in the morning there will be a sweet spot where the snow still holds a boot edge, but it is soft enough to ski, glissade, or boot glissade. Later in the afternoon, the warming may penetrate deep enough into the snowpack to make it “rotten,” so you post hole to your hip.
If the snow is firm or icy, crampons are the best—especially if the terrain is steep. Though crampons are more secure, they can be problematic if the snow is soft. If you notice snow balling under the bottoms of the crampons, climbing or descending snow in boots without crampons may be better—assuming you can get enough purchase (i.e. traction) with your boots.
We hope you found this video helpful.
Please remember, climbing and mountaineering are inherently dangerous. Climb at your own risk. Visit ClimbingTechTips.com for related comments, additional videos, and community feedback!




![Ice Climbing: 13. Placing Ice Screws | Climbing Tech Tips
Subscribe to our channel for the latest training videos, climbing tutorials and more! In this video we look at how to place ice screws. Ice screws offer protection for the lead climber in the event of a fall, the same way cams and stoppers do in rock climbing. Below are the steps for placing ice screws:
Step 1: Turn one foot sideways if possible to help create a more comfortable stance while placing the screw.
Step 2: Place the screw at waist level. This position allows the climber to maximize power without compromising balance. Placing a screw in a higher position minimizes power and affects balance.
Step 3: Begin by pushing and twisting the screw into the ice until the teeth bite and hold the screw in place. Note that the angle should be slightly lower than perpendicular, as this is the strongest and most effective angle to place a screw (the strength actually comes from the threads pulling against the ice).
Step 4: Pop out the “turbo” or crank, and continue screwing the piece into the ice. Be sure to return the crank to the original position, as the rope can potentially catch on this in a fall. These cranks, such as the “turbo” on the Black Diamond screw, have been rumored to sever ropes. You must return the crank to the original position!
Step 5: Chip away any weaker surface ice around the screw that may have cracked during the placement, and set the screw so the hanger is flush with the ice and hanging downward.
Please note that best practice / pull tests show we should back off the screw a bit, rather than over-crank it to get the hanger to sit flush on the ice. You can damage the thread placements by cranking the screw with too much force. This means if the hanger sits flush with the ice but is in the upward direction, it is best to un-thread a half turn to get the hanger to hang down, instead of cranking it tighter.
Step 6: Once the screw is screwed in up to the hanger, clip a quickdraw to the hanger. Then clip your rope into the lower carabiner of the quickdraw, just like sport climbing. Be sure to avoid back-clipping the rope. For more on this see our video on “Avoid Back-Clipping” [hyperlink to video].
Below are a few additional considerations when placing screws:
- More often than not, the leader will need to place the screw with one hand, especially on steeper ice. This makes the first step, which is getting the teeth to bite, the trickiest, and the most likely time you could drop a screw. No dropping!
- Strength of the screw placement depends on the quality of the ice you place it in:
Good = Cold, Clear, Dry
Bad = Soft, Warm, Wet
We hope you found this video helpful.
Please remember, ice climbing is inherently dangerous. Climb at your own risk. Visit https://ClimbingTechTips.com for related comments, additional videos, and community feedback! Ice Climbing: 13. Placing Ice Screws | Climbing Tech Tips](https://i.ytimg.com/vi/Q8_ZPB7C9Fo/mqdefault.jpg)





