Uploaded February 2018 | Updated November 2026, 2 days ago
Subscribe to our channel for the latest training videos, climbing tutorials and more! In this video we review falling considerations for the lead climber in sport climbing.
Sport climbing presents a unique opportunity for the climber to experience, practice and learn how to fall in a somewhat controlled environment. Bolts may be stronger than some gear placements, and many sport climbs are steep enough that the climber will fall into mid-air—or at least land with less impact force back on the rock.
Below are a few safety considerations when practicing falling on lead:
- Double-check the bolts you are going to fall on to make sure they are solid and strong. Please see our video on bolts and how to recognize bad ones.
- Makes sure to check the fall zone for obstacles or other concerns.
- Avoid falling above ledges or features in the rock that you could hit—build in a margin of safety in case your belayer gives you a too-soft or not-soft-enough catch (see next video on giving a soft catch).
- Steep or overhanging routes are typically the best for a clean fall.
- Make sure to be high enough on the climb that you will not hit the ground.
- Discuss with your belayer so they know how and when you plan to fall.
Below are a few considerations when practicing falling on lead:
- Start by taking very short falls with your waist at the bolt—or even just letting go and hanging on the rope.
- Gradually increase the distance of your falls until you are falling from the next bolt (just before clipping it).
- You can also practice pulling up rope like you are about to clip a bolt and then fall, increasing the fall distance. Be extra sure you have a clean fall zone below you and that you won’t hit the ground.
- When you start practicing falling from above the bolt, be sure your legs are not wrapped up in the rope. If your leg gets tangled or your heel caught behind the rope, it can flip you upside down. This is the scariest type of lead fall, because you could hit your head on the rock.
- When falling remember to relax. Keep your arms and legs gently bent, as if ready to pounce. Channel your best cat-like instincts for a gentle, upright landing.
- Avoid pushing out from the wall, as this will result in an arching fall that can slam you back into the rock.
- Your survival instinct might tell you to try grabbing the last quickdraw; however, if you miss, you can dangerously snag a finger in the carabiner. Practice leaving your hands free to brace yourself as you come back to the rock, or practice grabbing your knot to help make sure your rope remains in front of you as you fall.
- The greater the distance you’ve climbed above the last bolt, the less forceful the falls will be to your rope, body, and belayer. This greater distance gives the dynamic rope a chance to stretch a bit and absorb the shock.
- Avoid taking too many simultaneous falls on your rope, as the stretch and dynamic properties of the rope will be diminished temporarily (or permanently, in the case of big falls). If you’re taking a lot of falls, lower to the ground and switch ends part way through your practice session.
We hope you found this video helpful.
Please remember, climbing is inherently dangerous. Climb at your own risk. Visit ClimbingTechTips.com for related comments, additional videos, and community feedback!
Subscribe to our channel for the latest training videos, climbing tutorials and more! In this video we review falling considerations for the lead climber in sport climbing.
Sport climbing presents a unique opportunity for the climber to experience, practice and learn how to fall in a somewhat controlled environment. Bolts may be stronger than some gear placements, and many sport climbs are steep enough that the climber will fall into mid-air—or at least land with less impact force back on the rock.
Below are a few safety considerations when practicing falling on lead:
- Double-check the bolts you are going to fall on to make sure they are solid and strong. Please see our video on bolts and how to recognize bad ones.
- Makes sure to check the fall zone for obstacles or other concerns.
- Avoid falling above ledges or features in the rock that you could hit—build in a margin of safety in case your belayer gives you a too-soft or not-soft-enough catch (see next video on giving a soft catch).
- Steep or overhanging routes are typically the best for a clean fall.
- Make sure to be high enough on the climb that you will not hit the ground.
- Discuss with your belayer so they know how and when you plan to fall.
Below are a few considerations when practicing falling on lead:
- Start by taking very short falls with your waist at the bolt—or even just letting go and hanging on the rope.
- Gradually increase the distance of your falls until you are falling from the next bolt (just before clipping it).
- You can also practice pulling up rope like you are about to clip a bolt and then fall, increasing the fall distance. Be extra sure you have a clean fall zone below you and that you won’t hit the ground.
- When you start practicing falling from above the bolt, be sure your legs are not wrapped up in the rope. If your leg gets tangled or your heel caught behind the rope, it can flip you upside down. This is the scariest type of lead fall, because you could hit your head on the rock.
- When falling remember to relax. Keep your arms and legs gently bent, as if ready to pounce. Channel your best cat-like instincts for a gentle, upright landing.
- Avoid pushing out from the wall, as this will result in an arching fall that can slam you back into the rock.
- Your survival instinct might tell you to try grabbing the last quickdraw; however, if you miss, you can dangerously snag a finger in the carabiner. Practice leaving your hands free to brace yourself as you come back to the rock, or practice grabbing your knot to help make sure your rope remains in front of you as you fall.
- The greater the distance you’ve climbed above the last bolt, the less forceful the falls will be to your rope, body, and belayer. This greater distance gives the dynamic rope a chance to stretch a bit and absorb the shock.
- Avoid taking too many simultaneous falls on your rope, as the stretch and dynamic properties of the rope will be diminished temporarily (or permanently, in the case of big falls). If you’re taking a lot of falls, lower to the ground and switch ends part way through your practice session.
We hope you found this video helpful.
Please remember, climbing is inherently dangerous. Climb at your own risk. Visit ClimbingTechTips.com for related comments, additional videos, and community feedback!
![Ice Climbing: 13. Placing Ice Screws | Climbing Tech Tips
Subscribe to our channel for the latest training videos, climbing tutorials and more! In this video we look at how to place ice screws. Ice screws offer protection for the lead climber in the event of a fall, the same way cams and stoppers do in rock climbing. Below are the steps for placing ice screws:
Step 1: Turn one foot sideways if possible to help create a more comfortable stance while placing the screw.
Step 2: Place the screw at waist level. This position allows the climber to maximize power without compromising balance. Placing a screw in a higher position minimizes power and affects balance.
Step 3: Begin by pushing and twisting the screw into the ice until the teeth bite and hold the screw in place. Note that the angle should be slightly lower than perpendicular, as this is the strongest and most effective angle to place a screw (the strength actually comes from the threads pulling against the ice).
Step 4: Pop out the “turbo” or crank, and continue screwing the piece into the ice. Be sure to return the crank to the original position, as the rope can potentially catch on this in a fall. These cranks, such as the “turbo” on the Black Diamond screw, have been rumored to sever ropes. You must return the crank to the original position!
Step 5: Chip away any weaker surface ice around the screw that may have cracked during the placement, and set the screw so the hanger is flush with the ice and hanging downward.
Please note that best practice / pull tests show we should back off the screw a bit, rather than over-crank it to get the hanger to sit flush on the ice. You can damage the thread placements by cranking the screw with too much force. This means if the hanger sits flush with the ice but is in the upward direction, it is best to un-thread a half turn to get the hanger to hang down, instead of cranking it tighter.
Step 6: Once the screw is screwed in up to the hanger, clip a quickdraw to the hanger. Then clip your rope into the lower carabiner of the quickdraw, just like sport climbing. Be sure to avoid back-clipping the rope. For more on this see our video on “Avoid Back-Clipping” [hyperlink to video].
Below are a few additional considerations when placing screws:
- More often than not, the leader will need to place the screw with one hand, especially on steeper ice. This makes the first step, which is getting the teeth to bite, the trickiest, and the most likely time you could drop a screw. No dropping!
- Strength of the screw placement depends on the quality of the ice you place it in:
Good = Cold, Clear, Dry
Bad = Soft, Warm, Wet
We hope you found this video helpful.
Please remember, ice climbing is inherently dangerous. Climb at your own risk. Visit https://ClimbingTechTips.com for related comments, additional videos, and community feedback! Ice Climbing: 13. Placing Ice Screws | Climbing Tech Tips](https://i.ytimg.com/vi/Q8_ZPB7C9Fo/mqdefault.jpg)









