Uploaded July 2019 | Updated September 2026, 2 weeks ago
Hy There,
In this video i will show the Aircraft Stirling Engine i got from ENGINE DIY shop for review
It's some kind of useless thing, but also amazing piece of art, i always want one of them.
Motor runs real nice no vibration, not too loud (sound is so nice i wish it be louder)
I got problems with hose, when the flame pull to them they melted, but i got a goose from oxygen mask (can be found in any hospital) fit just perfect, minute later motor was back in game.
I also don't expect so nice finish, every corner is sanded, i simply can't find any single chip or sharp edges, that's quality product i think.
You can buy it here:
enginediy.com/products/aircraft-stirling-engine-mini-pocket-stirling-engine
Or choose from many other models:
enginediy.com
More about the motor:
Aircraft Stirling Engine Mini Pocket Stirling Engine Power Generator Engine Model Toy - A Stirling engine is a heat engine that operates by cyclic compression and expansion of air or other gas, the working fluid, at different temperature levels such that there is a net conversion of heat energy to mechanical work.The engine model is like a steam engine in that all of the engine's heat flows in and out through the engine wall.
Features
1, The airplane design Stirling engine has a cool head and a beautiful appearance, ideal for gift collection. Stirling engine/Stirling generator/Physical toys
2, The overall polishing is meticulous, the color is bright, it is not easy to rust and fade, and has a high-end texture, achieving a dual combination of texture and beauty.
3, Safe for use: The alcohol lamp has a fixed lamp holder for safer and more reliable. During operation, the engine model is placed in a horizontal position, and alcohol is injected into the alcohol lamp to ensure the safety of the alcohol lamp.
4, Working Conditions: The alcohol lamp heats the piston tube, and the dry air expands to generate power. At the same time, the flywheel is assisted by hand to drive the flywheel to rotate rapidly.
Tips:
1, After using it, please let the engine natural cool. Don't touch the alchohol burner, burned tube or the metal to avoid scald.
2, 95% alcohol (self-prepared) should be used in the operation. Water, kerosene, gasoline, lighter oil, and liquor should not be added.
3, The Stirling engine model is suit for people over 14 years old. Operate under adults' supervision.
Specifications:
Name: Aircraft Stirling Engine
Material: Stainless Steel + Glass
Holder Bottom Size: 80mm x 80mm x 10mm(L * W * T)
Transparent glass bottle Size: 16mm x 37mm (D * H)
Black Plastic Wing Length: 125mm
Engine Overall height: about 80mm
Engine Net Weight: 275g
Packing: Box
Package Content:
1 x Aircraft Stirling Engine
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6]
Sony A6000 [sel 30 f3.5macro]
GoPro 7 Black
Music is from: YouTube audiolibrary:
Stuck In The Air - The Tower of Light
Hy There,
In this video i will show the Aircraft Stirling Engine i got from ENGINE DIY shop for review
It's some kind of useless thing, but also amazing piece of art, i always want one of them.
Motor runs real nice no vibration, not too loud (sound is so nice i wish it be louder)
I got problems with hose, when the flame pull to them they melted, but i got a goose from oxygen mask (can be found in any hospital) fit just perfect, minute later motor was back in game.
I also don't expect so nice finish, every corner is sanded, i simply can't find any single chip or sharp edges, that's quality product i think.
You can buy it here:
enginediy.com/products/aircraft-stirling-engine-mini-pocket-stirling-engine
Or choose from many other models:
enginediy.com
More about the motor:
Aircraft Stirling Engine Mini Pocket Stirling Engine Power Generator Engine Model Toy - A Stirling engine is a heat engine that operates by cyclic compression and expansion of air or other gas, the working fluid, at different temperature levels such that there is a net conversion of heat energy to mechanical work.The engine model is like a steam engine in that all of the engine's heat flows in and out through the engine wall.
Features
1, The airplane design Stirling engine has a cool head and a beautiful appearance, ideal for gift collection. Stirling engine/Stirling generator/Physical toys
2, The overall polishing is meticulous, the color is bright, it is not easy to rust and fade, and has a high-end texture, achieving a dual combination of texture and beauty.
3, Safe for use: The alcohol lamp has a fixed lamp holder for safer and more reliable. During operation, the engine model is placed in a horizontal position, and alcohol is injected into the alcohol lamp to ensure the safety of the alcohol lamp.
4, Working Conditions: The alcohol lamp heats the piston tube, and the dry air expands to generate power. At the same time, the flywheel is assisted by hand to drive the flywheel to rotate rapidly.
Tips:
1, After using it, please let the engine natural cool. Don't touch the alchohol burner, burned tube or the metal to avoid scald.
2, 95% alcohol (self-prepared) should be used in the operation. Water, kerosene, gasoline, lighter oil, and liquor should not be added.
3, The Stirling engine model is suit for people over 14 years old. Operate under adults' supervision.
Specifications:
Name: Aircraft Stirling Engine
Material: Stainless Steel + Glass
Holder Bottom Size: 80mm x 80mm x 10mm(L * W * T)
Transparent glass bottle Size: 16mm x 37mm (D * H)
Black Plastic Wing Length: 125mm
Engine Overall height: about 80mm
Engine Net Weight: 275g
Packing: Box
Package Content:
1 x Aircraft Stirling Engine
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6]
Sony A6000 [sel 30 f3.5macro]
GoPro 7 Black
Music is from: YouTube audiolibrary:
Stuck In The Air - The Tower of Light
![Replacing DC motor on my mini mill and making cooling modification
Hy There,
In this video i will replace the motor. My original motor died some day after making hard job, i got a bit of problems to find replacement motor, even if that mill selled after many different brands.
When i finaly find the replacement motor from Bernardo 93ZYT005, i make also adittional colling from the motor, because housing is very closed and dont let the heat to come out.
After i mount the thermostate and 120mm fan onto housing, the motor work in much coller condition.
Parts for that kind of machine:
https://www.cnc-shop.mobasi.com/Ersatzteile:::71.html
You can buy fan and thermostat here:
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
fans:
https://www.banggood.com/custlink/K33KAr9qt8
thermostates:
https://www.banggood.com/custlink/Dvv3np9kFj
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: YT audiolibrarry:
Patrick Patrikios
-Dynamite
-Good Times
-Greedy
-No Favours
-Touch
-We March Together Replacing DC motor on my mini mill and making cooling modification](https://i.ytimg.com/vi/An07imxe4WM/mqdefault.jpg)
![Making new hobby workshop part 2: Painting the walls, window, pipes and radiator
Hy There,
In this video with few episodes i will make new hobby workshop.
in second episode i will paint the walls in 3 different colours, then i also paint the window to give it fresh look, radiator pipes and radiator.
For masking i buy a self leveling laser liner, wich is huge help, i will defenitely be a usefull tool in future.
you can check the lasers here on banggood:
Laser i used:
https://www.banggood.com/custlink/vmDcaDCy1s
other lasers:
https://www.banggood.com/custlink/G3KWO3rRTU
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: epidemic sounds
1: ES_Rain Checking - OTE
2: ES_Funk Face - OTE
3: ES_Sinking Deep - OTE Making new hobby workshop part 2: Painting the walls, window, pipes and radiator](https://i.ytimg.com/vi/ApRd-q0rchk/mqdefault.jpg)

![Neje 3 max addons NEJE H20 - Z axis adjuster, Belt Tensioner, AF8/KF8 AIR NOZZLE & R10 Heat Sink
Hy There,
In this video i will upgrade my neje 3 max with some super addons.
First of all is precize metal Z axis lifting device, wich make focus settings much easier and more precize, then i add a belt tensioner wich allow us to set entire machine to work more priceze because belt isnt too loosen or overtight.
i try to mount also metal airassist noozle, and realize i got much better cutting result with using manual air assist tube.
As last i upgrade my A40640 laser modul with adittional hetsink and fan so entire modul are cooler and allow us to use that modul on 100% laser power also in longterm use.
You can buy these items here:
NEJE H20 Z axis precize height adjuster:
https://shrsl.com/3n8sn
NEJE Belt Tensioner for NEJE 3/2s Max and NEJE 3 Pro:
https://shrsl.com/3n8sr
NEJE airassist kit:
https://shrsl.com/3n8ss
NEJE R10 Heat Sink + High-speed Fan:
http://shrsl.com/3n8sv
Neje shop:
https://shrsl.com/3n8sw
Dont forget to use coupon code for neje 3: V010WZ38E9ZN
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
Music is from: Epidemic Sounds
1: ES_Fire and Sword - Under Earth
2: ES_Speed Devil - Under Earth
3: ES_Tainted (Instrumental Version) - Red Revision
4: ES_Man Among Wolves - Three-Armed Scissor
5: ES_I Am Unbreakable - Niklas Johansson Neje 3 max addons NEJE H20 - Z axis adjuster, Belt Tensioner, AF8/KF8 AIR NOZZLE & R10 Heat Sink](https://i.ytimg.com/vi/BAnYpmRmOiY/mqdefault.jpg)
![Philips SONICARE toothbrush repair
Hy There,
In this video ill show you how i fix a Philips sonicare toothbrush, in my case some steel part was broken, it can be repaired or maken new one so i buy a broken used brush for $5 and already repair two brushes with their parts, preatty good if we know that new brush cost $100 and more.
Now i used that brush for about a month and work totally good.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6]
Sony A6000 [sel 30 f3.5macro]
GoPro 7 Black
Music is from: YouTube audiolibrary:
Shoulder Closures - Gunnar Olsen Philips SONICARE toothbrush repair](https://i.ytimg.com/vi/BB1zvvNRUek/mqdefault.jpg)
![Making new hobby workshop part 5: New equipment from Unior Hand Tools [unbox/assembling/review]
Hy There,
In this video i will assemble my new workbench from unior, unior is well known slovenian brand who produce professional hand dools and workshop equipment.
Workbench come out really nocely, heavy, solid and strong, more than i think it will be, also tool cariage and vice are awesome.
Unior hand tools really got amazing products, the only cons of that brand is that price is a bit high for home use, but afterall its a professional tool.
More about unior products you can find here:
Unior homepage:
https://uniortools.com/eng/
Modular work bench - module A7
https://uniortools.com/eng/product/990MA7-625757-modular-work-bench-module-a7#856036
IRONGATOR 125mm engineers vice
https://uniortools.com/eng/product/721-6-irongator-engineer-s-vice#128659
Tool carriage Economic
https://uniortools.com/eng/product/940ECO-tool-carriage-economic#118311
📸Unior social media profiles:
Facebook: »https://bit.ly/3OXLqGU«(UniorHandTools)
Instagram: »https://bit.ly/3sdaEYi« (uniorhandtools)
LinkedIn: »https://bit.ly/3MSjcLN« (Unior Hand Tools)
Youtube: »https://bit.ly/3vFYpW2« (Unior Hand Tools)
- - - - - - - - - - - -
#madeforwork #uniorhandtools #uniortools #unior
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: epidemic sound:
1: ES_Ringing in My Head (Instrumental Version) - Coma Svensson
2: ES_On the Flipside - Divorce Applause
3: ES_Cool Boarders - Honeycutts
4: ES_Lights & Sounds - Honeycutts Making new hobby workshop part 5: New equipment from Unior Hand Tools [unbox/assembling/review]](https://i.ytimg.com/vi/BmRrD6i1dJk/mqdefault.jpg)
![NEJE Max 4 CNC Engraver / cutter / plotter + E80 laser modul + drawing pen [unbox/review/first test]
Hy There,
In this video ill show you my new Neje engraver, its NEJE max 4 with E80 laser modul.
This latest NEJE product is really amazing, neje max 4 itself offer us many upgrades from neje 3 max, like better stronger frame, bigger accuracy, motorized Z axis, and much more...
About E80 laser modul i got only one word to say: Monster.
Neje max 4 i test in this video is one of first versions, new version already has some improvement like:
-X and Y cable chains included
-pen holder for drawing is longer
-E80 has new air assist nozzle, wich is shorter so you can use bigger z step per pas value without worried that lens hit the wood.
Link to NEJE store [ship from EU/USA/China
NEJE MAX 4:
https://shrsl.com/4aig6
accessories:
https://shrsl.com/4aig9
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
Neje wiki
NEJE max 4:
https://wiki.nejetool.com/doku.php?id=nejelaser_max_4#offline_control
E80 modul:
https://neje.wiki/doku.php?id=nejelaser_e80#laser_material_database
Some of my other laser videos:
NEJE E40:
https://www.youtube.com/watch?v=AFZtMHHA9Bw
NEJE 3 MAX:
https://www.youtube.com/watch?v=Q6K4R8Dc60M&t
Neje addons:
https://www.youtube.com/watch?v=BAnYpmRmOiY&t
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: Epidemic sound
1: ES_Real Fish - Neon One
2: ES_Force - AGST
3: ES_Doing This - Hallman
4: ES_Sunset Serenade - dvine
5: ES_Time Is Fading - Squiid
6: ES_I Make Happy Music Now - Bonkers Beat Club
7: ES_New Tomorrow - Tape Machines
8: ES_Married to the Light - oomiee
9: ES_Wishful - dvine
10: ES_I Dont Really Care - Hallman NEJE Max 4 CNC Engraver / cutter / plotter + E80 laser modul + drawing pen [unbox/review/first test]](https://i.ytimg.com/vi/CHPmpsvvpgw/mqdefault.jpg)
![How to make RC hydraulic valve only with minilathe [no cnc there] step by step [plans included]
Hy There,
Into video about how to make rc cylinder i got lot of question when the video about valve will come, and finally its here.
Valve is much easier to make like cylinder, and really all we need is a minilathe and some tools.
i make this valve preatty big, so i can easily show you, but that valve is easy to make in 20mm diameter or eaven smaller.
To mount servomotor on that valve use some imagination, it shouldnt be hard, or wait until i make some hydraulic project and make it :)
material i used:
-30mm aluminium round rod
-20mm bras round rod
-4mm hex brass bar
-5x7mm or 5x9mm o-ring
-seal paste (i use loctite 518)
Plans you can find there:
I share plans for 25mm and 30mm diameter valve, all the plans is on .jpg files with low quality and high quality (600DPI) so you can see every tiny detail.
https://drive.google.com/drive/folders/10ZGIleZdnui74P5770FFy1uyd_gDSxX7
Making of: Proxxon/dremel drill holder for minilathe
https://www.youtube.com/watch?v=1AJPM3GXaco&t
My other hydraulic videos:
How to make RC Cylinder only with a minilathe:
https://www.youtube.com/watch?v=QRg0ZAvxVFk&t
Using hydraulic on rc Car for lift the snow plow
https://www.youtube.com/watch?v=gm4Hr7pFyUk&t
Other:
https://www.youtube.com/watch?v=0FM2hFYzTPs&t
https://www.youtube.com/watch?v=WaeEBXaj-vA&t=
https://www.youtube.com/watch?v ysOO3XsOXE
https://www.youtube.com/watch?v 2gwtHt5AxA
https://www.youtube.com/watch?v=jLYJOSKB4QU
https://www.youtube.com/watch?v=PJ_ZeVw9FdQ
This is my affiliate link to a lathe tool from banggood if you maybe need some.
If you bought from there you will support me and a project like that.
https://www.banggood.com/custlink/DvGKIb917B
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: YouTube audiolibrary
1. Chunk - Quincas Moreira
2. Center Ring - Freedom Trail Studio
3. Happy Sixth - Freedom Trail Studio
4. Morning Mist - Quincas Moreira
5. Stardrive - Jeremy Blake How to make RC hydraulic valve only with minilathe [no cnc there] step by step [plans included]](https://i.ytimg.com/vi/DPEbNPFBz9A/mqdefault.jpg)

![How to replace cable on power tools
Hy There,
In this video i just show how easy is to replace demaged cable on your drill, grinder, saw or any other AC powered hand tool.
Some tool you can buy here:
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
https://www.gearbest.com/sale/power-tools/?lkid=79522292
https://www.banggood.com/custlink/GGGhy2sRsl
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: YT audiolibrary
Rockville - Patrick Patrikios How to replace cable on power tools](https://i.ytimg.com/vi/E7N9cAuWL_Y/mqdefault.jpg)
![Making of: Special screw [cutting thread on mini lathe, Making hex head]
Hy There,
In this video ill make a special screw (oil cap) for tractor rotary mower.
The screw was lost and than all the oil leak out and the main shaft come out also, so there was a bit of demage because the drums of mower crash together with a knife.
I need about two hours of work on a lathe and mill to make this screw.
If you are interested tell me in a comment and i will make better video only about how to cutting thread on minilathe.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
https://www.youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500(sel 18-200) Sony A6000(sel 30 macro)
Music is from YouTube audiolibrarry:
1973 - Bruno E. Making of: Special screw [cutting thread on mini lathe, Making hex head]](https://i.ytimg.com/vi/EATJdz2Mm44/mqdefault.jpg)