![Making of: Special screw [cutting thread on mini lathe, Making hex head] @TinC33](https://i.ytimg.com/vi/EATJdz2Mm44/maxresdefault.jpg)
Uploaded June 2018 | Updated September 2026, 2 weeks ago
Hy There,
In this video i'll make a special screw (oil cap) for tractor rotary mower.
The screw was lost and than all the oil leak out and the main shaft come out also, so there was a bit of demage because the drums of mower crash together with a knife.
I need about two hours of work on a lathe and mill to make this screw.
If you are interested tell me in a comment and i will make better video only about how to cutting thread on minilathe.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500(sel 18-200) Sony A6000(sel 30 macro)
Music is from YouTube audiolibrarry:
1973 - Bruno E.
Hy There,
In this video i'll make a special screw (oil cap) for tractor rotary mower.
The screw was lost and than all the oil leak out and the main shaft come out also, so there was a bit of demage because the drums of mower crash together with a knife.
I need about two hours of work on a lathe and mill to make this screw.
If you are interested tell me in a comment and i will make better video only about how to cutting thread on minilathe.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500(sel 18-200) Sony A6000(sel 30 macro)
Music is from YouTube audiolibrarry:
1973 - Bruno E.
![Making of: Special screw [cutting thread on mini lathe, Making hex head]](https://i.ytimg.com/vi/EATJdz2Mm44/mqdefault.jpg "Making of: Special screw [cutting thread on mini lathe, Making hex head]
Hy There,
In this video ill make a special screw (oil cap) for tractor rotary mower.
The screw was lost and than all the oil leak out and the main shaft come out also, so there was a bit of demage because the drums of mower crash together with a knife.
I need about two hours of work on a lathe and mill to make this screw.
If you are interested tell me in a comment and i will make better video only about how to cutting thread on minilathe.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
https://www.youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500(sel 18-200) Sony A6000(sel 30 macro)
Music is from YouTube audiolibrarry:
1973 - Bruno E.")
![Bernardo Profi 600 G bench lathe + 2-axis DRO + QCTP [unbox / review / first test]](https://i.ytimg.com/vi/HWp2LUu0-ag/mqdefault.jpg "Bernardo Profi 600 G bench lathe + 2-axis DRO + QCTP [unbox / review / first test]
Hy There,
In this video i will unbox, clean, review and make some first chips with my new bench lathe i buy, it?s bernardo profi 600g with lot of equipement.
I didnt use lathe a lot, but im deffinitely impressed by its power, its defiinitely a big update from a 300mm minilathe i got so far, because turning steel and inox is piece of cake for that lathe.
Bernardo got really wide range of tools for woodworking, metalworking and lot more, from smallest to biggest version.
For more information and for dealer in your country check bernardo webside:
https://www.bernardo.at/en/
Slovenian buyers contact official slovenian dealer premzl trade:
https://www.premzl-trade.si/
profi 600g lathe 400v with dro:
https://www.bernardo.at/en/metall/metallbearbeitung/drehmaschinen/leit-und-zugspindeldrehmaschinen/profi-600-g-400-v-inkl-2-achs-digitalanzeige-es-12-v.html
Profi 600 G / 400 V incl. 2-axis digital readout ES-12 V
The turning lathe Profi 600 G is serially equipped with a leadscrew and feed rod for thread cutting and the automatic longitudinal and cross feed. The 12-step control gear allow a quick adjustment of the speed – no belt change necessary. The compact construction and the high own weight guarantees smooth running and precise work.
Properties: Control gear allows easy and quick speed change High-quality tapered rollerbearings ensure high concentricity of spindle nose (≤ 0,009 mm) Powerful motor for high torque, speed range 45 – 2000 rpm Wide range of applications: precision mechanics, training and education, etc. Logically arranged feed setting allows easy, smooth adjustment Solid machine bed with inductive hardened and polished guideways Ideal for processing steel, non-ferrous metals and plastics Comes complete with feed rod for automatic longitudinal and cross feed Apron features handwheels with fine scale
Technical specifications:Distance between centers 600 mmCenter height: 140 mmSwing over bed: 280 mmBed width 150: mmSpindle bore 26: mmTaper at spindle bore: MT 4Speed range: (12) 45 - 2000 rpmLongitudinal feed: 0,044 - 0,437 mm/rev.Cross feed: 0,022 - 0,218 mm/rev.Metric thread: (30) 0,25 - 5 mmInch thread: (20) 6 - 96 threads/1“Travel of tailstock sleeve: 110 mmTaper of tailstock sleeve: MT 2Motor power output: S1 100% 0,75 kW / 400 V Motor power input: S6 40% 1,0 kW / 400 VMachine dimension (W x D x H)*: 1220 x 700 x 500 mmWeight approx.: 220 kg* without stand
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: epidemic sound
1: ES_Forsaken - Under Earth
2: ES_Fire and Sword - Under Earth
3: ES_Speed Devil - Under Earth
4: ES_The Scavengers Daughter - Under Earth
5: ES_My New Disease - Under Earth
6: ES_Rock Solid - Mothers Madness
7: ES_Santa in a Hurry - J.F. Gloss")
![NEJE Master Laser 20W module upgrade [engraving and cutting]](https://i.ytimg.com/vi/Hvg8slOVSyE/mqdefault.jpg "NEJE Master Laser 20W module upgrade [engraving and cutting]
Hy There,
In this video i will upgrade my Neje Master 3.5W with 20W cutting module.
Its really powerful, it can cut wood up to 10mm and engrave into aluminium oxide, inox and other materials.
Warning, do not playing with this lasers, and use safety glasses all the time, when laser is on.
You can buy these items here:
Neje machines on neje store:
https://shareasale.com/r.cfm?b=1634981&u=2689002&m=101855&urllink=&afftrack=717061
Different moduls from neje shop:
https://shrsl.com/2qckr
master 2 series machine and module coupon: V010WZ38E9ZN
Neje on banggood:
https://www.banggood.com/custlink/GvvRSCVoPm
Neje on gearbest:
http://gbe.st/302y62l
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
Neje max:
https://www.youtube.com/watch?v=kBJLl4jsCG0
Neje mini:
https://www.youtube.com/watch?v=cl0_QTIEZOE
Neje vs Neje S (8vs32bit):
https://www.youtube.com/watch?v=ZO2xUnOoJm4
Neje master 1:
https://www.youtube.com/watch?v=kg6Xd4m647Y
Ortur master:
https://www.youtube.com/watch?v=cMxQ73jwAAY&t
Neje 20W laser modul:
https://www.youtube.com/watch?v=Hvg8slOVSyE&t
Ortur upgrade:
https://www.youtube.com/watch?v=QjyQ0i580LQ&
Insma laser:
https://www.youtube.com/watch?v=YoYEFVLAzy0
NEJE MASTER 3500mW
https://www.banggood.com/custlink/mvKGbOefUu
NEJE MASTER 7W
https://www.banggood.com/custlink/GmGGNL4fMH
Power Supply 12V 3A:
https://www.banggood.com/custlink/Dm3G2rcCMU
20W laser module:
https://www.banggood.com/custlink/GG3KbO01q0
coupon code: BG6845
Coupon Price: 15%off
Exp.4.30
Here you can see Neje master 3.5w review
https://www.youtube.com/watch?v=kg6Xd4m647Y&t=
Giveaway!
To join the giveaway you just need to:
1. Subscribe to my channel
2. Leave the comment (any kind of comment)
-The winner will be selected with software which will choose one of random comments under that video, you can leave more comment but only one will count.
-The winner will be announced on 22.march at 20:00
-I will leave the comment under the winner, to get his mail for information, so please stay tuned about.
-YouTube got nothing to do with it and assumes no responsibility
-Banggood is a golden sponsor which will ship the prize to your address totally freely (you may pay tax fees depend on a country you live)
-This is my first giveaway, so i hope everything go well ;)
More info about 20W modul:
NEJE 450nm 20W Laser Module
Wavelength 450nm
Radiator Size 30*80mm
Material Copper + Aluminum
Weight 202g
Drive Position Built-in
Is the Power Adjustable PWM can be adjusted
Drive Protection Surge Protection, Overvoltage Protection
Input Power approx. 12V2A, about20W (without fan power)
Output Optical Power 5.5W
Line Length 300mm
Control Line Installation Method Pluggable
Fan Size 30*10mm
Fan Speed 15000 rpm
Controllable Temperature Less than 60 degrees Celsius
PWM 20KHz / 3.3V
Temperature Sensor Yes
Focus Range 40mm-60mm ( 50mm is best)
Focus Diameter 0.05mm
Best Focal Length 10mm from the light exit
Interface Specification 4pin PH2.0 (red: 12V, black: GND, yellow: PWM, green: temperature signal)
Main Applications Paper cutting, Wood cutting(5mm), Depth Engraving, g-code drawing...
Note 1. It is heavier, not suitable for engraving, only suitable for cutting.
2. Please apply this module under the premise of safety protection!
3. Recommended application machine: NEJE Master.
4. NEJE Master comes standard with 12V2A charger. If you want to upgrade your old machine, you need to prepare another 12V3A power supply.
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: TeknoAXEs Royalty Free Music
The Way I Walk - Glitch Hop - Royalty Free Music
https://www.youtube.com/watch?v=88UH-AEpc7w&t
Reprogrammed Reality - Glitch Hop - Royalty Free Music
https://www.youtube.com/watch?v=CFwpB2UILZI
Peace in the Circuitry - Glitch Hop - Royalty Free Music
https://www.youtube.com/watch?v=Z6yjnnhpZ1A")
![Makita battery test and review fake vs original vs aftermarket [dasbatteries]](https://i.ytimg.com/vi/IvWPmByAecc/mqdefault.jpg "Makita battery test and review fake vs original vs aftermarket [dasbatteries]
Hy There,
Today ill just test some batteries
das batteries are quite good for the hal of original price they work just fine
but please dont buy china fake makita batteries, its dangerous to start fire after havy use
link to das batteries (not affiliate or payment, i bought their battery and charger pack)
https://dasbatteries.com/
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: epidemic sound:
1:ES_Let Us Go Back - Tomas Skyldeberg
2:ES_Red Leaves Falling - Civet Cat
3:ES_That Moment - Tomas Skyldeberg")
