Uploaded April 2022 | Updated November 2026, 2 days ago
02:33 Explanation of what a "Sidereal Clock" is used for
11:50 Teardown & circuit analysis
20:05 Checking the frequencies of the main crystal oscillator and the divider stages
22:47 Adjusting the frequency
24:12 Frequency variation with mains voltage
25:20 Frequency variation with temperature & recovery
02:33 Explanation of what a "Sidereal Clock" is used for
11:50 Teardown & circuit analysis
20:05 Checking the frequencies of the main crystal oscillator and the divider stages
22:47 Adjusting the frequency
24:12 Frequency variation with mains voltage
25:20 Frequency variation with temperature & recovery



![Every maker should have…[Pt.31]...a good magnifier, a loupe & good lighting
Which magnifying devices are really useful and affordabel for the hobbyist electronics-lab ?
Support Roger on Patreon: https://www.patreon.com/kainkalabs
Why is good and bright lighting so important in the lab?
Roger demonstrates a few and gives his personal preferences.
Shop: http://www.ak-modul-bus.de/stat/laborzubehoer.html
Forum-Thread: https://forum.kainkalabs.com/forumdisplay.php?fid=13
twitter: http://twitter.com/kainkalabs
facebook: http://facebook.com/kainkalabs Every maker should have…[Pt.31]...a good magnifier, a loupe & good lighting](https://i.ytimg.com/vi/ngE5619D0DI/mqdefault.jpg)
![Every Maker should have...[Pt.34]...a good PCB-Holder
A good PCB-Holderis essential to ease your PCB-work.
Support Roger on Patreon: https://www.patreon.com/kainkalabs
Roger recommends the Weller ESF-120 and the Ideal-Tek PCSA-Series.
Shop: http://www.ak-modul-bus.de/stat/laborzubehoer.html
Further Links:
Weller ESF-120: http://weller.de/de/Weller Produkte Produkt-Details.html?article_id=D0493390001379336395A114346#{%22string%22:%22%22,%22current_site%22:%22weller%22}
Ideal-Tek PCB-Holders: http://idealtek.ch/landing/electronics/soldering-desoldering/circuit-board-holders/circuit-board-holders/
Forum-Thread: https://forum.kainkalabs.com/forumdisplay.php?fid=13 Every Maker should have...[Pt.34]...a good PCB-Holder](https://i.ytimg.com/vi/oXX2rBZxdAM/mqdefault.jpg)


![Resonant Magnet-Field Antennas [Pt.5]: Dielectric & Magnetic Losses
After discussing the losses due to copper-resistance, skin-effect & proximity effect in the last episode we now come to lesser known losses due to ferromagnetics and dielectrics near the reception coil (or an inductor in general)
Further links:
Ferrite-rod properties: https://youtu.be/yzmZEfFMjmI
Magnetic losses: https://youtu.be/T4q5irgKEew
Basket-weave & Honeycomb-Coils (in German):
http://www.jogis-roehrenbude.de/Leserbriefe/Schlemm-Wickelmaschine/Korbspulen.htm
http://www.jogis-roehrenbude.de/Leserbriefe/Neumann.htm
http://www.jogis-roehrenbude.de/Spulenwickeln.htm Resonant Magnet-Field Antennas [Pt.5]: Dielectric & Magnetic Losses](https://i.ytimg.com/vi/p3K4gNZ-_5s/mqdefault.jpg)


