Uploaded February 2016 | Updated November 2026, 22 hours ago
Video for fixing the issues: youtu.be/hQY4sKDlp3I
Roger describes 2 issues with the ATTEN AT80D soldering station:
Support Roger on Patreon: patreon.com/kainkalabs
1.) There is a big time lag behind the displayed "real" temperature and the measured temperature at the solder-tip
2.) The displayed temperature is more then 100°C lower than the measured temperature and in it´s original state only 300°C max. can be reached!
The first issue is to non-optimal design of the soldering-iron
The second issue can be "cured" by adjusting an internal 10-turn trimpot.
The displayed temperature then is still totally wrong and a manual tabel must be created for real vs. Diaplyed temperature.
Shop: ak-modul-bus.de/stat/produkte.html
Forum-Thread: forum.kainkalabs.com/forumdisplay.php?fid=3
German Channel: youtube.com/channel/UCvYdDS4b1EUVQoFhsJ9VhBQ
Forum: forum.kainkalabs.com/forumdisplay.php?fid=3
Shop: ak-modul-bus.de
twitter: twitter.com/kainkalabs
facebook: facebook.com/kainkalabs
Video for fixing the issues: youtu.be/hQY4sKDlp3I
Roger describes 2 issues with the ATTEN AT80D soldering station:
Support Roger on Patreon: patreon.com/kainkalabs
1.) There is a big time lag behind the displayed "real" temperature and the measured temperature at the solder-tip
2.) The displayed temperature is more then 100°C lower than the measured temperature and in it´s original state only 300°C max. can be reached!
The first issue is to non-optimal design of the soldering-iron
The second issue can be "cured" by adjusting an internal 10-turn trimpot.
The displayed temperature then is still totally wrong and a manual tabel must be created for real vs. Diaplyed temperature.
Shop: ak-modul-bus.de/stat/produkte.html
Forum-Thread: forum.kainkalabs.com/forumdisplay.php?fid=3
German Channel: youtube.com/channel/UCvYdDS4b1EUVQoFhsJ9VhBQ
Forum: forum.kainkalabs.com/forumdisplay.php?fid=3
Shop: ak-modul-bus.de
twitter: twitter.com/kainkalabs
facebook: facebook.com/kainkalabs

![Suppressing unwanted oscillations with a Snubber [Pt.2]
Can we get away with the unwanted oscillation when switching off an inductor by using a snubber?
Yes, but we still have the back-EMF :-(((
Link to the 1. part of this video:
Wikipedia entries:
https://en.wikipedia.org/wiki/Snubber
https://en.wikipedia.org/wiki/Boucherot_cell
https://en.wikipedia.org/wiki/Zobel_network#Zobel_networks_and_loudspeaker_drivers Suppressing unwanted oscillations with a Snubber [Pt.2]](https://i.ytimg.com/vi/qB32IUeY_B8/mqdefault.jpg)







![Every maker should have…[Pt.17]…a Nixie-Watch and a Solder:Time-Watch
Roger shows his Nixie-Watch from David Forbes/Cathodecorner and his Solder:Time Watch as well as 2 cheap Binary Watches.
Support Roger on Patreon: https://www.patreon.com/kainkalabs
European Mod for Solder:Time-Watch
https://kainkalabs.com/upload/?f=1569c51fd8eec9
Forum-Thread: https://forum.kainkalabs.com/forumdisplay.php?fid=13
Shop: http://www.ak-modul-bus.de/stat/laborzubehoer.html
Further Links:
Nixie Watch from David Forbes: http://cathodecorner.com/nixiewatch/index.html
Steve Wozniaks Nixie-Watch: https://youtu.be/m4R3hODnTGo
Jeff Thomas 4-Digit Nixie-Watch: http://www.nixie.dk/~jthomas/watch.html
Solder:Time Watch: http://www.spikenzielabs.com/SpikenzieLabs/SolderTime.html
Documentation: kommt noch als Link zum Download für European Mod Firmware
Solter:Time II Matrix Watch:http://www.spikenzielabs.com/SpikenzieLabs/SolderTime_2.html
Forum: https://forum.kainkalabs.com/forumdisplay.php?fid=3
Shop: http://www.ak-modul-bus.de/
twitter: http://twitter.com/kainkalabs
facebook: http://facebook.com/kainkalabs Every maker should have…[Pt.17]…a Nixie-Watch and a Solder:Time-Watch](https://i.ytimg.com/vi/r8vKN3jk_80/mqdefault.jpg)
