Uploaded May 2017 | Updated November 2026, 5 hours ago
After discussing the losses due to copper-resistance, skin-effect & proximity effect in the last episode we now come to lesser known losses due to ferromagnetics and dielectrics near the reception coil (or an inductor in general)
Further links:
Ferrite-rod properties: youtu.be/yzmZEfFMjmI
Magnetic losses: youtu.be/T4q5irgKEew
Basket-weave & Honeycomb-Coils (in German):
jogis-roehrenbude.de/Leserbriefe/Schlemm-Wickelmaschine/Korbspulen.htm
jogis-roehrenbude.de/Leserbriefe/Neumann.htm
jogis-roehrenbude.de/Spulenwickeln.htm
After discussing the losses due to copper-resistance, skin-effect & proximity effect in the last episode we now come to lesser known losses due to ferromagnetics and dielectrics near the reception coil (or an inductor in general)
Further links:
Ferrite-rod properties: youtu.be/yzmZEfFMjmI
Magnetic losses: youtu.be/T4q5irgKEew
Basket-weave & Honeycomb-Coils (in German):
jogis-roehrenbude.de/Leserbriefe/Schlemm-Wickelmaschine/Korbspulen.htm
jogis-roehrenbude.de/Leserbriefe/Neumann.htm
jogis-roehrenbude.de/Spulenwickeln.htm




![Suppressing unwanted oscillations with a Snubber [Pt.2]
Can we get away with the unwanted oscillation when switching off an inductor by using a snubber?
Yes, but we still have the back-EMF :-(((
Link to the 1. part of this video:
Wikipedia entries:
https://en.wikipedia.org/wiki/Snubber
https://en.wikipedia.org/wiki/Boucherot_cell
https://en.wikipedia.org/wiki/Zobel_network#Zobel_networks_and_loudspeaker_drivers Suppressing unwanted oscillations with a Snubber [Pt.2]](https://i.ytimg.com/vi/qB32IUeY_B8/mqdefault.jpg)





