Uploaded October 2026 | Updated November 2026, 2 hours ago
Steel fence posts can build a strong, straight and economical farm fence — but a few small mistakes can shorten fence life or make the job much harder.
Here are five practical steel fence post tips covering post driving, alignment, orientation, corrosion, post quality and even how to remove a post that's stuck solid in the ground.
In this Farm Learning video, I work through the techniques I use when building fences with steel posts, including why I don't drive every post hard against the ground wire, how I orientate the post and attach the fence wire, and why allowing wire to move through a steel post can eventually create wear and corrosion.
We also look at the difference between galvanised and bitumen-dipped steel fence posts, why the amount of steel in the post matters, where heavier posts can strengthen a fence line, and a very simple trick for removing old steel posts that have developed a plug of soil around the base.
You'll see:
• A safer way to load a manual post driver without lifting it over your head
• How to keep a long fence line straight using a ground wire
• Why I keep posts 2–3 mm clear of the ground wire
• Which way I face steel fence posts when attaching wire
• Why wire movement can wear galvanisation and create failure points
• When galvanised posts make sense
• What to look for in quality bitumen-dipped posts
• Why post weight and steel thickness matter
• Where heavier XL posts can reinforce a fence
• A simple way to loosen a steel post before using a post lifter
These principles apply to farm fencing, livestock fencing, rural property fencing and many conventional and electric fence systems. Whether you're building a new fence, replacing an old fence line or choosing steel posts for a project, understanding post alignment, corrosion protection, steel thickness and wire attachment can make the finished fence easier to build and maintain.
WATCH NEXT ON FARM LEARNING:
• Farm fencing end assemblies and strainers
• Fence wire tying, knots and attachment methods
• Electric fencing systems and fence construction
• Practical fencing tools and post-driving equipment
If you've got your own method for installing steel posts — particularly which way you face the post — let me know in the comments. I know that one can start a good fencing discussion.
Subscribe to Farm Learning with Tim Thompson for practical agricultural education, farm fencing, livestock systems, regenerative agriculture, machinery, tools and real-world farm problem solving.
And if you know someone building a fence, send them this video. One of these tips might save them some work.
Stockpost https://whitesrural.com.au/brands/stockpost/
#FarmFencing #SteelFencePosts #FencingTips #RuralFencing #FarmLearning
00:00 5 Tips for Better Steel Fence Posts
00:22 Tip 1: Drive Posts Without Wrecking Your Shoulders
01:06 Tip 2: How to Keep a Fence Line Straight
01:40 Avoid Blisters When Using a Post Driver
01:59 Tip 3: Which Way Should a Steel Post Face?
02:14 Why I Don't Put Wire Behind the Post
02:42 Why I Don't Run Fence Wire Through the Holes
03:13 Tip 4: Choosing the Right Steel Fence Post
03:20 Galvanised vs Bitumen-Dipped Posts
03:51 Cheap Steel Posts: What You're Actually Losing
04:39 When Heavy XL Posts Make Sense
05:15 Tip 5: How to Remove a Stuck Steel Post
05:49 The Simple Trick That Breaks the Soil Plug
06:23 Five Steel Post Tips Recap
Steel fence posts can build a strong, straight and economical farm fence — but a few small mistakes can shorten fence life or make the job much harder.
Here are five practical steel fence post tips covering post driving, alignment, orientation, corrosion, post quality and even how to remove a post that's stuck solid in the ground.
In this Farm Learning video, I work through the techniques I use when building fences with steel posts, including why I don't drive every post hard against the ground wire, how I orientate the post and attach the fence wire, and why allowing wire to move through a steel post can eventually create wear and corrosion.
We also look at the difference between galvanised and bitumen-dipped steel fence posts, why the amount of steel in the post matters, where heavier posts can strengthen a fence line, and a very simple trick for removing old steel posts that have developed a plug of soil around the base.
You'll see:
• A safer way to load a manual post driver without lifting it over your head
• How to keep a long fence line straight using a ground wire
• Why I keep posts 2–3 mm clear of the ground wire
• Which way I face steel fence posts when attaching wire
• Why wire movement can wear galvanisation and create failure points
• When galvanised posts make sense
• What to look for in quality bitumen-dipped posts
• Why post weight and steel thickness matter
• Where heavier XL posts can reinforce a fence
• A simple way to loosen a steel post before using a post lifter
These principles apply to farm fencing, livestock fencing, rural property fencing and many conventional and electric fence systems. Whether you're building a new fence, replacing an old fence line or choosing steel posts for a project, understanding post alignment, corrosion protection, steel thickness and wire attachment can make the finished fence easier to build and maintain.
WATCH NEXT ON FARM LEARNING:
• Farm fencing end assemblies and strainers
• Fence wire tying, knots and attachment methods
• Electric fencing systems and fence construction
• Practical fencing tools and post-driving equipment
If you've got your own method for installing steel posts — particularly which way you face the post — let me know in the comments. I know that one can start a good fencing discussion.
Subscribe to Farm Learning with Tim Thompson for practical agricultural education, farm fencing, livestock systems, regenerative agriculture, machinery, tools and real-world farm problem solving.
And if you know someone building a fence, send them this video. One of these tips might save them some work.
Stockpost https://whitesrural.com.au/brands/stockpost/
#FarmFencing #SteelFencePosts #FencingTips #RuralFencing #FarmLearning
00:00 5 Tips for Better Steel Fence Posts
00:22 Tip 1: Drive Posts Without Wrecking Your Shoulders
01:06 Tip 2: How to Keep a Fence Line Straight
01:40 Avoid Blisters When Using a Post Driver
01:59 Tip 3: Which Way Should a Steel Post Face?
02:14 Why I Don't Put Wire Behind the Post
02:42 Why I Don't Run Fence Wire Through the Holes
03:13 Tip 4: Choosing the Right Steel Fence Post
03:20 Galvanised vs Bitumen-Dipped Posts
03:51 Cheap Steel Posts: What You're Actually Losing
04:39 When Heavy XL Posts Make Sense
05:15 Tip 5: How to Remove a Stuck Steel Post
05:49 The Simple Trick That Breaks the Soil Plug
06:23 Five Steel Post Tips Recap










