Uploaded August 2026 | Updated September 2026, 3 days ago
Farm boundary fencing has to do more than hold cattle when lifestyle blocks and domestic dogs are next door. Here’s how a failing patched boundary fence was rebuilt with prefabricated mesh, steel end assemblies and the right tension for hilly ground.
On this 1,070-acre grazing property near Burnt Creek in Victoria, the existing stock fence was doing its original job well: keeping cattle in. But neighbouring lifestyle blocks created a new problem. The same fence also needed to keep domestic dogs out, and the collection of light mesh, extra steel and temporary patches simply wasn't doing the job.
We replace a section of the boundary with Murray Stiff Stay 8/90/15 prefabricated mesh and Rotek Drive Tight steel end assemblies, then work through the complete installation.
You'll see how the steel end assemblies are positioned and anchored, why post spacing is reduced on sloping country, where heavier Stockpost XL posts are useful, how to roll prefabricated mesh out correctly, how to terminate the line wires, and how to strain mesh over a hill without removing all of the tension crimps.
We also look at Fence Line Solutions End Clips as an alternative to tying high-tensile termination knots, as well as their strainers. To power the strainer boards Wireman Boundary Strainers were used to tension the prefabricated wire easily.
The important lesson isn't simply which products were used. It's how the whole fencing system works together: strong end assemblies, appropriate intermediate posts, correct alignment, good termination, sufficient mesh tension and materials suited to the animals the fence actually needs to control.
For farmers and landholders researching farm boundary fencing, cattle fencing, stock fencing, woven wire or field fencing, dog-resistant rural fencing, prefabricated mesh installation or fencing on hilly ground, this is a practical real-world example of how the system is installed and why each part matters.
Watch next on Farm Learning:
• Farm fence end assemblies and strainer-post construction
• High-tensile fencing knots, joins and terminations
• Electric fencing, stock fencing and practical fence fault finding
If you're building or repairing a rural boundary fence, share this with another farmer, contractor or landholder working through the same problem.
Subscribe to Farm Learning with Tim Thompson for practical agricultural education based on real farms, real tools and field experience.
And let me know in the comments: what creates the biggest headache on your boundary fences — livestock pressure, dogs, terrain, end assemblies or keeping the wire properly tensioned?
VIDEO DETAILS
Location: Near Burnt Creek, Victoria, Australia
Property: 1,070-acre grazing property
Fence purpose: Keep cattle contained while excluding neighbouring domestic animals
Fence type: Prefabricated stock mesh boundary fence
Mesh featured: Murray Stiff Stay 8/90/15 prefabricated mesh https://whitesrural.com.au/product/stiff-stay-exclusion-fencing/
End assembly: Rotech Drive Tight steel end assembly system https://rotechrural.com.au/products/steel-fence-posts/drive-tight-steel-strainer-post/
Mesh termination: Fence Line Solutions End Clips https://shop.fencelinesolutions.com.au/home/End-Clips-Pack-100-p568661094
Straining equipment: Strainer boards and Wireman Boundary Strainers https://wireman.com.au/products/chain-grab-boundary-strainer?srsltid=AfmBOopDZRx4SuT8KNR4CDV8adkn8IBxz7zIUMrLjZ2gF8_VkTnvh_Sg
Terrain: Sloping and hilly boundary
Key topics: boundary fencing, livestock fencing, mesh tension, end assemblies, steel stock posts, post spacing and fence construction
#FarmFencing #BoundaryFencing #LivestockFencing #CattleFarming #RuralAustralia
00:00 Why the old cattle fence isn't enough
01:06 The new boundary fence plan
02:33 Choosing prefabricated stock mesh
03:26 Installing the steel end post
05:49 Post spacing on sloping country
06:52 Standard vs XL steel stock posts
08:00 Building the steel end assembly
09:21 Fittings, grease and safe installation
10:06 Bracing an end assembly on a hill
11:21 Why strong end assemblies matter
11:43 Rolling out the mesh correctly
12:37 How to cut Stiff Stay knots
13:18 A faster way to terminate mesh
14:09 End Clips vs termination knots
14:58 How to strain mesh over a hill
15:29 Strainer boards and better tools
16:21 How tight should mesh fencing be?
17:45 Clip direction and stock safety
18:13 The finished one-day fence
18:41 Good fences make good neighbours
Farm boundary fencing has to do more than hold cattle when lifestyle blocks and domestic dogs are next door. Here’s how a failing patched boundary fence was rebuilt with prefabricated mesh, steel end assemblies and the right tension for hilly ground.
On this 1,070-acre grazing property near Burnt Creek in Victoria, the existing stock fence was doing its original job well: keeping cattle in. But neighbouring lifestyle blocks created a new problem. The same fence also needed to keep domestic dogs out, and the collection of light mesh, extra steel and temporary patches simply wasn't doing the job.
We replace a section of the boundary with Murray Stiff Stay 8/90/15 prefabricated mesh and Rotek Drive Tight steel end assemblies, then work through the complete installation.
You'll see how the steel end assemblies are positioned and anchored, why post spacing is reduced on sloping country, where heavier Stockpost XL posts are useful, how to roll prefabricated mesh out correctly, how to terminate the line wires, and how to strain mesh over a hill without removing all of the tension crimps.
We also look at Fence Line Solutions End Clips as an alternative to tying high-tensile termination knots, as well as their strainers. To power the strainer boards Wireman Boundary Strainers were used to tension the prefabricated wire easily.
The important lesson isn't simply which products were used. It's how the whole fencing system works together: strong end assemblies, appropriate intermediate posts, correct alignment, good termination, sufficient mesh tension and materials suited to the animals the fence actually needs to control.
For farmers and landholders researching farm boundary fencing, cattle fencing, stock fencing, woven wire or field fencing, dog-resistant rural fencing, prefabricated mesh installation or fencing on hilly ground, this is a practical real-world example of how the system is installed and why each part matters.
Watch next on Farm Learning:
• Farm fence end assemblies and strainer-post construction
• High-tensile fencing knots, joins and terminations
• Electric fencing, stock fencing and practical fence fault finding
If you're building or repairing a rural boundary fence, share this with another farmer, contractor or landholder working through the same problem.
Subscribe to Farm Learning with Tim Thompson for practical agricultural education based on real farms, real tools and field experience.
And let me know in the comments: what creates the biggest headache on your boundary fences — livestock pressure, dogs, terrain, end assemblies or keeping the wire properly tensioned?
VIDEO DETAILS
Location: Near Burnt Creek, Victoria, Australia
Property: 1,070-acre grazing property
Fence purpose: Keep cattle contained while excluding neighbouring domestic animals
Fence type: Prefabricated stock mesh boundary fence
Mesh featured: Murray Stiff Stay 8/90/15 prefabricated mesh https://whitesrural.com.au/product/stiff-stay-exclusion-fencing/
End assembly: Rotech Drive Tight steel end assembly system https://rotechrural.com.au/products/steel-fence-posts/drive-tight-steel-strainer-post/
Mesh termination: Fence Line Solutions End Clips https://shop.fencelinesolutions.com.au/home/End-Clips-Pack-100-p568661094
Straining equipment: Strainer boards and Wireman Boundary Strainers https://wireman.com.au/products/chain-grab-boundary-strainer?srsltid=AfmBOopDZRx4SuT8KNR4CDV8adkn8IBxz7zIUMrLjZ2gF8_VkTnvh_Sg
Terrain: Sloping and hilly boundary
Key topics: boundary fencing, livestock fencing, mesh tension, end assemblies, steel stock posts, post spacing and fence construction
#FarmFencing #BoundaryFencing #LivestockFencing #CattleFarming #RuralAustralia
00:00 Why the old cattle fence isn't enough
01:06 The new boundary fence plan
02:33 Choosing prefabricated stock mesh
03:26 Installing the steel end post
05:49 Post spacing on sloping country
06:52 Standard vs XL steel stock posts
08:00 Building the steel end assembly
09:21 Fittings, grease and safe installation
10:06 Bracing an end assembly on a hill
11:21 Why strong end assemblies matter
11:43 Rolling out the mesh correctly
12:37 How to cut Stiff Stay knots
13:18 A faster way to terminate mesh
14:09 End Clips vs termination knots
14:58 How to strain mesh over a hill
15:29 Strainer boards and better tools
16:21 How tight should mesh fencing be?
17:45 Clip direction and stock safety
18:13 The finished one-day fence
18:41 Good fences make good neighbours
