Uploaded April 2022 | Updated September 2026, 2 weeks ago
At the SEMA Show 2021 we checked out this beautiful 2022 Ford Maverick in the Ford Booth with a ton of custom 3D printed parts on it. Watch to hear an interview with car builder, Dom Tucci of Tucci Hot Rods and learn more about how this project came together. 3D Printed with "consumer grade" 3D Printers out of PETG filament, a lot of custom car parts have been made in the Tucci Hot Rods workshop.
Check out Tucci Hot Rods: tuccihotrods.com
Want to download FREE design files for the prints in this video? Check out my Thangs 3D Profile: thangs.com/MandicReally
TimeStamps:
0:00 - Intro
1:00 - Dom Tucci Interview
1:12 - What is 3D Printed on it?
1:40 - Designing
1:58 - What 3D Printers were used?
2:21 - Parts Assembly?
2:55 - Material Finishing?
3:23 - How was Resin Printing used?
3:54 - Patron Shout-Outs
4:36 - Outro
--------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Filmed with:
*** Main Camera: amzn.to/2U4b1nZ
*** Video Recorder Used: amzn.to/30cAvU9
*** Action Camera: amzn.to/2ATHS73
*** Second Camera: amzn.to/371EhBM
*** B-Roll Lens: amzn.to/2xmg85L
*** Wide Angle Lens: amzn.to/2YiZTmH
*** Slider: amzn.to/3nGZ1Uh
*** Lav Mic: amzn.to/2DFwgR5
*** Shotgun Mic: amzn.to/2IjTJiB
*** Mini Tripod: amzn.to/2Eok8Fw
*** Monopod - amzn.to/2C1YEMU
*** Tripod: amzn.to/2yASruf
*** Gimbal: amzn.to/2FNwesV
*** Primary Lighting: amzn.to/2jHROnW
*** Additional Lighting: amzn.to/2DImspx
*** RGB Lights: amzn.to/2UUGAOk
*** Drone: amzn.to/2yDkwkI
-----------------------------------------------------------------------------------------------
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
#MandicReally #3DPrinting #FordFITSSystem
At the SEMA Show 2021 we checked out this beautiful 2022 Ford Maverick in the Ford Booth with a ton of custom 3D printed parts on it. Watch to hear an interview with car builder, Dom Tucci of Tucci Hot Rods and learn more about how this project came together. 3D Printed with "consumer grade" 3D Printers out of PETG filament, a lot of custom car parts have been made in the Tucci Hot Rods workshop.
Check out Tucci Hot Rods: tuccihotrods.com
Want to download FREE design files for the prints in this video? Check out my Thangs 3D Profile: thangs.com/MandicReally
TimeStamps:
0:00 - Intro
1:00 - Dom Tucci Interview
1:12 - What is 3D Printed on it?
1:40 - Designing
1:58 - What 3D Printers were used?
2:21 - Parts Assembly?
2:55 - Material Finishing?
3:23 - How was Resin Printing used?
3:54 - Patron Shout-Outs
4:36 - Outro
--------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Filmed with:
*** Main Camera: amzn.to/2U4b1nZ
*** Video Recorder Used: amzn.to/30cAvU9
*** Action Camera: amzn.to/2ATHS73
*** Second Camera: amzn.to/371EhBM
*** B-Roll Lens: amzn.to/2xmg85L
*** Wide Angle Lens: amzn.to/2YiZTmH
*** Slider: amzn.to/3nGZ1Uh
*** Lav Mic: amzn.to/2DFwgR5
*** Shotgun Mic: amzn.to/2IjTJiB
*** Mini Tripod: amzn.to/2Eok8Fw
*** Monopod - amzn.to/2C1YEMU
*** Tripod: amzn.to/2yASruf
*** Gimbal: amzn.to/2FNwesV
*** Primary Lighting: amzn.to/2jHROnW
*** Additional Lighting: amzn.to/2DImspx
*** RGB Lights: amzn.to/2UUGAOk
*** Drone: amzn.to/2yDkwkI
-----------------------------------------------------------------------------------------------
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
#MandicReally #3DPrinting #FordFITSSystem
