Uploaded November 2022 | Updated September 2026, 2 weeks ago
SNAKE! Today we are testing out Slice Engineerings Creality Ender Upgrade Kit! This converts a stock Mk8 Creality hotend to the Slice Engineering Copperhead heater block and accepts RepRap V6 style nozzles. Also included in the Creality Ender Upgrade kit is a "BRIDGEMASTER" nozzle. Is this modification really an upgrade & is the Slice Engineering Copperhead kit worth it? Find out in this video!
-----------------------------------------------------------------------------------------------
Products Featured (Some Affiliate Links):
*** Slice Engineering: sliceengineering.com/mandicreally - 5% Coupon Code: ALANM5
*** Polymaker Filament: tinyurl.com/Polymakerr
*** Electric Screwdriver: amzn.to/3EqweOl
*** Creality Ender 3: amzn.to/3tKNgBK
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Filmed with (Affiliate Links):
*** Main Camera: bhpho.to/3RStTnz
*** Main Lens: bhpho.to/3FhSfjc
*** Video Recorder Monitor: bhpho.to/3RW0Yii
*** Action Camera: bhpho.to/45CS10Q
*** Wide Angle Lens: bhpho.to/3RXQXBj
*** Slider: bhpho.to/3ZRRIhi
*** Studio Microphone: bhpho.to/3PUL3yb
*** Voiceover Microphone: bhpho.to/46uECsE
*** Monopod: bhpho.to/3PT2yir
*** Tripod: bhpho.to/3PSKXY4
*** Primary Lighting: bhpho.to/3RXSmb3
*** Additional Lighting: bhpho.to/3RXVfsf
*** RGB Lights: bhpho.to/46S6VBn
*** Drone: bhpho.to/476GGr1
-----------------------------------------------------------------------------------------------
Timestamps:
0:00 - Intro
0:40 - Parts
1:10 - Install
4:55 - Flow Testing
8:13 - Bridging Test
8:55 - RepRap Nozzles
9:43 - Mini-Review
10:33 - Disclaimer
10:47 - Outro
Creality Copperhead Upgrade Kit
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
SNAKE! Today we are testing out Slice Engineerings Creality Ender Upgrade Kit! This converts a stock Mk8 Creality hotend to the Slice Engineering Copperhead heater block and accepts RepRap V6 style nozzles. Also included in the Creality Ender Upgrade kit is a "BRIDGEMASTER" nozzle. Is this modification really an upgrade & is the Slice Engineering Copperhead kit worth it? Find out in this video!
-----------------------------------------------------------------------------------------------
Products Featured (Some Affiliate Links):
*** Slice Engineering: sliceengineering.com/mandicreally - 5% Coupon Code: ALANM5
*** Polymaker Filament: tinyurl.com/Polymakerr
*** Electric Screwdriver: amzn.to/3EqweOl
*** Creality Ender 3: amzn.to/3tKNgBK
-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------
Filmed with (Affiliate Links):
*** Main Camera: bhpho.to/3RStTnz
*** Main Lens: bhpho.to/3FhSfjc
*** Video Recorder Monitor: bhpho.to/3RW0Yii
*** Action Camera: bhpho.to/45CS10Q
*** Wide Angle Lens: bhpho.to/3RXQXBj
*** Slider: bhpho.to/3ZRRIhi
*** Studio Microphone: bhpho.to/3PUL3yb
*** Voiceover Microphone: bhpho.to/46uECsE
*** Monopod: bhpho.to/3PT2yir
*** Tripod: bhpho.to/3PSKXY4
*** Primary Lighting: bhpho.to/3RXSmb3
*** Additional Lighting: bhpho.to/3RXVfsf
*** RGB Lights: bhpho.to/46S6VBn
*** Drone: bhpho.to/476GGr1
-----------------------------------------------------------------------------------------------
Timestamps:
0:00 - Intro
0:40 - Parts
1:10 - Install
4:55 - Flow Testing
8:13 - Bridging Test
8:55 - RepRap Nozzles
9:43 - Mini-Review
10:33 - Disclaimer
10:47 - Outro
Creality Copperhead Upgrade Kit
The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
