How to add 023000EE activation key - Audi lifetime maps update FEC/SWaP code @mrfixpl

mr-fix Add activation key #023000EE to Audi #MMI system DIY tutorial. With More Incredible Bash you can flash your #MIB2 unit with modified image and add all missing FEC/SWaP activation codes - including the ones for navigation map update, CarPlay, AndroidAuto. For free.
Start with entering hidden red menu (REM) to check installed activation codes and current firmware. Update MMI firmware if needed, install More Incredible Bash, enter hidden green menu (GEM) and use More Incredible Bash to perform AIO (all-in-one) patch.

🔗 Check MIB2 firmware updates: http://mib-helper.com
📺 Watch Audi MMI firmware update: youtu.be/SeQCTiXJHVc
🔗 Download More Incredible Bash from GitHub: github.com/Mr-MIBonk/M.I.B._More-Incredible-Bash
🔗 Download custom system images for M.I.B.: http://mib.mibsolution.one
📺 Watch More Incredible Bash SD card preparation and installation: youtube.com/watch?v=oQaE-uaMRZY

⚠️ Warning! You are doing it at your own risk!
⚠️ Make sure your cars battery is in good shape or use external power source to make sure that voltage drops will not interrupt firmware update. Also use quality SD card.
ℹ️ Make sure that you have your Audi MMI system firmware up to date before applying custom system image with More Incredible Bash. Future firmware updates would overwrite the custom image.
ℹ️ This DIY tutorial was made in Audi A3/S3/RS3 with Audi MMI MIB2 High system (MHI2_ER_Au37x_P5089) but the same procedure will apply to other Audi vehicles with MIB2 system.

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

0:00 Audi MMI with old activation key 02300020
0:10 Check installed keys in hidden red menu
0:50 Check MMI firmware, update if needed
1:45 Prepare More Incredible Bash SD card
2:55 Install M.I.B. from red menu
4:10 Enter Audi MMI hidden green menu
4:50 patch_unit_AIO - All-In-One system modification
5:10 lights OFF, heater OFF, engine ON
5:30 start, wait 15 minutes, don't interrupt
6:10 Success and final reboot
6:45 Look for 023000EE lifetime code in hidden red menu
7:05 Download and install new maps

updated 2 years ago

How to add 023000EE activation key - Audi lifetime maps update FEC/SWaP code

mr-fix 2024-03-01 | Add activation key #023000EE to Audi #MMI system DIY tutorial. With More Incredible Bash you can flash your #MIB2 unit with modified image and add all missing FEC/SWaP activation codes - including the ones for navigation map update, CarPlay, AndroidAuto. For free.
Start with entering hidden red menu (REM) to check installed activation codes and current firmware. Update MMI firmware if needed, install More Incredible Bash, enter hidden green menu (GEM) and use More Incredible Bash to perform AIO (all-in-one) patch.

🔗 Check MIB2 firmware updates: http://mib-helper.com
📺 Watch Audi MMI firmware update: youtu.be/SeQCTiXJHVc
🔗 Download More Incredible Bash from GitHub: github.com/Mr-MIBonk/M.I.B._More-Incredible-Bash
🔗 Download custom system images for M.I.B.: http://mib.mibsolution.one
📺 Watch More Incredible Bash SD card preparation and installation: youtube.com/watch?v=oQaE-uaMRZY

⚠️ Warning! You are doing it at your own risk!
⚠️ Make sure your cars battery is in good shape or use external power source to make sure that voltage drops will not interrupt firmware update. Also use quality SD card.
ℹ️ Make sure that you have your Audi MMI system firmware up to date before applying custom system image with More Incredible Bash. Future firmware updates would overwrite the custom image.
ℹ️ This DIY tutorial was made in Audi A3/S3/RS3 with Audi MMI MIB2 High system (MHI2_ER_Au37x_P5089) but the same procedure will apply to other Audi vehicles with MIB2 system.

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

0:00 Audi MMI with old activation key 02300020
0:10 Check installed keys in hidden red menu
0:50 Check MMI firmware, update if needed
1:45 Prepare More Incredible Bash SD card
2:55 Install M.I.B. from red menu
4:10 Enter Audi MMI hidden green menu
4:50 patch_unit_AIO - All-In-One system modification
5:10 lights OFF, heater OFF, engine ON
5:30 start, wait 15 minutes, don't interrupt
6:10 Success and final reboot
6:45 Look for 023000EE lifetime code in hidden red menu
7:05 Download and install new maps

#911 #porsche #porsche911

mr-fix 2024-06-23 | ...

Audi A3/S3/RS3 (8V) auto start/stop memory module

mr-fix 2024-06-15 | How to disable auto #start-stop system in #Audi A3/S3/RS3 (8V) with a memory module? Easy plug&play installation, no coding required, no modification of the original wiring. Check out how to remove the button panel, add the #memory module from AliExpress ($10), hide it under the dashboard, and test if the engine auto start/stop feature is disabled by default when you turn on the engine.

ℹ️ This module is an alternative to the coding method (which you can perform with OBDeleven or VCDS) and battery monitoring module method. It will not cause any fault codes in your car.
This installation was performed in Audi A3/S3/RS3 (8V), but there are module versions for other Audi models as well.

🛒 Start/stop memory module: http://ali4cars.com/s/?p=audi-auto-start-stop-memory-module
🛒 Start/stop memory module: ali4cars.com/product/audi-auto-start-stop-memory-module
🛒 Prying tools: http://ali4cars.com/s/?p=interior-removal-toolset
🛒 Buy OBDeleven here (ref): http://mr-fix.info/redirect/obdeleven
📺 OBDeleven review: youtu.be/_X-HYkpah-0

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

0:00 Audi auto start/stop without memory
0:40 alternative with OBDeleven or by disconnection battery module
1:20 $10 start/stop memory module from AliExpress
2:20 how to remove the button panel
2:55 disconnect original wiring
3:25 how the key and lock works
4:00 install the memory module between buttons and original wiring
4:30 airbag indicator issues can cause SRS warning light
5:00 assembling the dashboard back
5:20 check if the Audi engine auto start/stop system is disabled

Audi A3/S3/RS3 (8V): tips for dynamic mirror indicators installation

mr-fix 2024-03-29 | Tips for #dynamic indicators DIY installation in #Audi A3/S3/RS3 (8V). How to replace standard wing mirror #indicators with cheap $10 flowing ones from AliExpress. How to remove mirror? Where to pry the cup? Do you need to disconnect the wiring? Which tools will help you disassemble the side mirror?

🛒 Audi A3/S3/RS3 (8V) dynamic indicators: http://ali4cars.com/s/?p=a3-8v-dynamic-side-indicators
🛒 Prying tools: http://ali4cars.com/s/?p=interior-removal-toolset

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

0:00 $10 Audi dynamic indicators from AliExpress
0:18 T10 torx + suction cup + prying tools
0:55 rotate mirror forward
1:05 use suction cup for extra grip and safety
1:25 dimming mirrors with additional wiring
2:05 mirror cup locks to pry
4:00 2 screws and 3 plastic tabs on the indicator
4:40 2-pin connector check
5:07 Check if the connector is sitting tight
5:20 Check if it works before assembling
5:30 test-drive to check for blown bulb errors
5:40 Buy indicators and prying tools on AliExpress

Checking air flaps and A/C evaporator with Teslong borescope camera

mr-fix 2024-03-12 | Using Teslong borescope to check #Audi S3 (8V) #HVAC air flaps and A/C #evaporator for mold, leaks and damage. Build-in LED, Full HD optics with dual camera, and movable tip make the navigation much easier.

🛒 Buy Teslong Borescope amazon.com/dp/B0CJY6SWBN

🔧 Tech specs
5ft long scope
Two FullHD cameras with 70-degree FOV and LED backlight
210-degree scope tip movement
Display: 4.5-inch
Build-in microphone and speaker
Build-in battery with USB-C charging
microSD memory card for photos and videos
Carrying case included

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

0:00 Teslong borescope snake camera
0:25 Unboxing and endoscope overview
1:40 Camera tip moves left-right
2:00 USB-C, microSD, microphone, speaker
2:50 Settings and adjustments
3:50 Record FullHD videos with endoscope camera
4:40 Inspection of A/C air flaps and A/C evaporator
6:30 Temperature readout from the camera unit
6:45 Checking air outlet temperature sensor
7:10 Teslong borescope pros & cons
9:40 $150 on Amazon

Audi A3/S3/RS3 (8V): MagSafe phone holder wireless charger + CarPlay adapter

mr-fix 2024-03-08 | DIY solution for ultimate Audi A3/#S3/RS3 8V phone holder, #MagSafe charger and wireless #CarPlay. I've combined old aluminum bracket that snaps between air vents, with modern MagSafe holder/charger that snaps to your iPhone with magnets and charges the battery wirelessly. Charger is powered from the cabin fuse box, USB-C cable is guided under the dashboard and through the air vent near the phone holder. On top of that I've added CarlinKit 5.0 wired-to-wireless CarPlay adapter under the armrest, which makes sure that I don't need to use any cables. CarPlay will connect without cables, automatically. Phone will be charged as soon as it's placed on the MagSafe holder.

📺 CarlinKit 5.0 test & review: youtu.be/xM7zJvE2p6Y

🔗 CarlinKit 5.0 carlinkitcarplay.com/products/carlinkit-2air-make-your-wired-carplay-wired-android-auto-to-wireless?ref=mrfix
🎟 18% OFF with discount code: MRFIX
🔗 Metal holder for Audi A3 8V: http://ali4cars.com/s/?p=audi-a3-8v-vent-phone-holder
🔗 MagSafe 30W Car Charger: http://ali4cars.com/s/?p=magsafe-car-holder-charger-wireless-30w
🔗 USB step-down converter: http://ali4cars.com/s/?p=usb-step-down-power-converter
🔗 Fuse taps: http://ali4cars.com/s/?p=fuse-taps
🔗 USB-C cable 90 degree: http://ali4cars.com/s/?p=usbc-90-degree-cable
🔗 P&P USB-C power adapter: http://ali4cars.com/s/?p=usb-hardwire-kit-plug-and-play
🔗 Insolation tape: http://ali4cars.com/s/?p=insolation-adhesive-cloth-fabric-tape

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

0:00 Ultimate Audi A3 8V phone holder + wireless CarPlay
0:05 Air vent removal
0:20 Required parts: aluminum bracket, MagSafe holder, power converter
2:40 drill a hole in OEM air vent for the USB cable
3:10 DIY: ultimate iPhone holder/charger
6:55 Power adapter or step-down power converter
7:25 Accessing cabin fusebox
8:15 Guiding the USB-C cable under the dashboard
9:45 Install the MagSafe charger between vents
10:40 Cabin fusebox with 12V ignition and ground connection
12:10 Testing the charger
12:30 wireless CarPlay with CarlinKit 5.0 adapter

Free Speed Traps for Audi MMI MIB2 and VC (Blitzer speedcam)

mr-fix 2024-03-06 | Add speed traps, section controls, and mobile radars to #Audi MMI MIB2 High system. This free package will show additional PPOI on both #MMI display and Virtual Cockpit. You can browse and select desired points of interest, like #speedtraps, fast-food chains, markets, petrol stations, etc.

🔗 PPOI for Audi MMI MIB2 High: http://mib-helper.com/index.php?train=MHI2_ER_AU57X_K3663#ppoi
🔗 Check more at mib-helper.com
📺 Audi MMI MIB2 update: youtu.be/SeQCTiXJHVc
📺 Audi A3 (8V) Virtual Cockpit update: youtu.be/Lp-EzfGiPyA
📺 023000EE maps activation key: youtu.be/rzOmVFBbDNg
📺 Audi MMI MIB2 High maps update: youtu.be/e3sMBUWPWZk

⚠️ Warning! You are doing it at your own risk! Make sure that you are not breaking local laws.
⚠️ Make sure your cars battery is in good shape or use external power source to make sure that voltage drops will not interrupt firmware update. Also use quality SD card.
ℹ️ This DIY tutorial was created in 2016 Audi A3/S3/RS3 (8V) with Audi MMI MIB2 (MHI2) system. The same files and similar procedure will work for other VAG vehicles, including other Audi cars, VW Golf MK7, VW Passat B8, VW Tiguan, Skoda Octavia 3, Skoda Superb 3, Skoda Karoq, Seat Leon 3, Seat Arona, Seat Ateca.

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

0:00 MMI system in Audi A3/S3/RS3 (8V) with latest firmware
0:25 Preparing Speed Traps PPOI update
2:00 PPOI installation in Audi MMI
3:10 Selecting desired points of interest
4:05 Speed traps, mobile cameras visible on MMI display and Virtual Cockpit
5:10 Sound notification when nearby
5:55 Check mib-helper.com for latest speed traps

Free 2024 maps update (Audi VW Skoda Seat MHI2 MHIG)

mr-fix 2024-03-03 | Download and #update Audi VW Seat Skoda 2024 #maps for free in MIB1 MHIG and MIB2 MHI2 systems (Audi #MMI, VW Discover Pro, Skoda Columbus, Seat Navi Pro). Here's how to check current navigation database, confirm system version and activation code (023000EE), download update package, prepare 64GB SD card or thumb drive, and how to start the navigation update procedure.

🔗 Download EU 2024 maps for MHIG/MHI2:
https://vw-maps-cdn.lighthouselabs.eu/vw-maps/P350_N60S5MIBH3_EU.7z
navigation-maps.volkswagen.com/vw-maps/P350_N60S5MIBH3_EU.7z
infotainment-cdn.skoda-auto.com/base/maps/HIGH12_P350_EU_202345.zip
🔗 Find most recent maps on: mib-helper.com
📺 Update Audi MMI firmware: youtu.be/SeQCTiXJHVc
📺 Update VW Discover Pro firmware: youtu.be/6FlHM9VZl_s
📺 Update Seat Navi Pro firmware: youtu.be/xDAw4sj-9tI
📺 Update Skoda firmware: youtu.be/4I5Lnwc1w5c
📺 Get 023000EE key: youtu.be/rzOmVFBbDNg

⚠️ Warning! You are doing it at your own risk!
⚠️ Make sure your cars battery is in good shape or use external power source to make sure that voltage drops will not interrupt firmware update. Also use quality SD card.
ℹ️ Navigation maps are used for traffic sign recognition and for predictive active cruise control (pACC). Keeping them up to date will boost how those two features work. Only factory navigation is displayed on Virtual Cockpit - you can not use CarPlay/AndroidAuto with Google maps on the Active Info Display.
ℹ️ This DIY tutorial was created in 2016 Audi S3 (8V) with Audi MMI MIB2 (MHI2) system but the same files and similar procedure will work for other VAG vehicles, including VW Golf MK7, VW Passat B8, Skoda Octavia 3, Seat Leon 3.

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

0:00 Old maps in Audi, VW, Skoda, Seat
0:25 Check how old are your maps
0:50 Check MIB High firmware version
2:10 Check FEC/SWaP code for maps (Audi: 023000EE)
3:00 Download new 2024 maps with mib-helper.com
3:45 Prepare SD card with navigation update
4:30 You can update from hidden menu
5:05 Trigger maps update from system settings
6:15 Start update navigation database and wait 45 minutes
7:30 Why update? Backup, pACC, and traffic signs
9:30 2024 maps installed in Audi

Audi A3 Virtual Cockpit firmware update tutorial with download links

mr-fix 2024-02-28 | DIY firmware update for Virtual Cockpit instrument cluster in #Audi A3/S3/RS3 (8V). Download latest software, prepare SD card and the vehicle and perform installation of the newer firmware. #Update procedure takes about 10 minutes and doesn't require any advanced tools or knowledge. After this your #VirtualCockpit will be running newer and hopefully bugs free version of the firmware.

🔗 Download firmware update from https://mibsolution.one/
🔗 Fix SVM B201A fault code with mib-helper.com/im-so-xory
🛒 Buy OBDeleven here (ref): http://mr-fix.info/redirect/obdeleven
🎟 Get 10% OFF with code: MRFIX10

ℹ️ Change log for AU_C1_AU37X_0150_0742_prod (that I've found):
- current tab memory works after ignition is switched off
- phone tab redesign
- maintenance service message fix
- minor bug fixes and stability improvements

🛠 Audi A3 Virtual Cockpit firmware update procedure
1. Enter VC hidden menu to check your current firmware version.
2. Find and download desired firmware update for your VC on mibsolution.one (user and password: guest). In my case 8W6906961R AU_C1_AU37X_0150_0742_prod for KI_FPK_AU37X device.
3. Use full-sized quality SD card, format it with FAT32 file system with the smallest allocation size available.
4. Unzip and copy firmware update files to the root directory of the SD card.
5. Remove other cards from the main unit and insert update SD into SD1 port.
6. Take the keyless remote to the receiver on the steering column and turn the ignition on.
7. Enter red hidden menu and start the update procedure.
8. Wait patiently. Virtual Cockpit display will go dark, indicators and warning lights will flash. Main unit will reboot several times before the new firmware is installed.
9. When the installation is complete you can hit "Resume" at the end of the update summary and "Cancel" on the next screen.
10. Use scan tool like OBDeleven or VCDS to clear the B201A / B201A00 fault.
11. Enter VC hidden menu to confirm that new version was installed.
12. Remove SD card, remove the key, remove external power supply.

⚠️ Warning! You are doing it at your own risk!
⚠️ Audi eTron users reported that FW 0150 has a misplaced icon bug.
⚠️ Make sure your cars battery is in good shape or use external power source to make sure that voltage drops will not interrupt firmware update.

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

0:00 Audi S3 8V with Virtual Cockpit
0:10 Check current firmware version: old 0045
1:25 Download AU_C1_AU37X_0150_0742_prod 8W6906961R
2:15 Prepare SD card with KI_FPK_AU37X firmware update
3:05 Tape the keyless remote to the immo coil - avoid error code 142
4:10 Ignition on, engine off, lights off, fan off, update card in
5:20 Start firmware update from red engineering menu (REM)
6:55 Do not interrupt SWDL (SoftWare DownLoad mode)
8:55 Finish up the update + final reboot
10:25 Check if VC works correctly
11:30 Fix SVM B201A fault code with OBDeleven
14:50 Clear faults from other modules - Databus message missing...
16:10 Check if VC is running new software 0150

Audi MIB2 MMI firmware upgrade & free update download

mr-fix 2024-02-23 | How to #update Audi #MMI system for free to latest #firmware version to bring new features, bug fixes, system stability, newer components support.

🔗 Check for updates on http://mib-helper.com
🔗 Download firmware updates on https://mibsolution.one/
🛒 Buy OBDeleven here (ref): http://mr-fix.info/redirect/obdeleven
🎟 Get 10% OFF with code: MRFIX10

🛠 Audi MMI MIB firmware update procedure
1. Enter red hidden menu and check your current SW train. Check on mib-helper.com if you have the latest one.
2. Find and download latest supported firmware update for your Audi on mibsolution.one (user and password: guest).
3. Use 8GB or larger SD card, format it with FAT32 file system with the smallest allocation size available.
4. Extract and copy firmware update files to the root directory of the SD card.
5. Remove other cards from the main unit and insert update SD into SD1 port.
6. Disable connection with external audio amplifier
7. Enter red hidden menu and start the update procedure.
8. Wait patiently. Main unit will reboot several times before the new firmware is installed.
9. When the installation is complete you can hit "Resume" at the end of the update summary and "Cancel" on the next screen.
10. Use scan tool like OBDeleven or VCDS to clear the B201A fault.
11. Reconnect MOST connection to external amplifier.
12. Enter red hidden menu to confirm that the update procedure was done.

⚠️ Warning! You are doing it at your own risk! This DIY procedure can overwrite custom system modifications like CP-OFF patch, CID-Lock, SWaP patch, custom skins, dual-navi patch.
⚠️ Make sure your cars battery is in good shape, use external power source, or turn the engine on for the update process to make sure that voltage drops will not interrupt firmware update.
⚠️ Make sure to skip external audio amplifier update if you don't have proper tools to parameterize it afterwards. You can disconnect MOST from the main unit, disable MOST in long coding, or use hidden menu and user-defined update to unselect amplifier package from the update list.

ℹ️ This tutorial was made in Audi A3/S3 8V with MHI2 system. This procedure will fit other Audi vehicles (A3, A4, A5, A6, A7, A8, Q2, Q3, Q5, Q7, Q8, TT, R8) and other MMI variants (MSTD, MHIG, MST2, MHS2, MHI2) as well.

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

0:00 Check Audi MMI current firmware version in hidden menu
1:45 Decoding Software Train
3:45 Don't update Bose / Bang&Olufsen amplifier
5:15 Preparing MMI update SD card with mib-helper.com and mibsolution.one
8:50 Engine ON, lights OFF, fan LOW, Start-Stop OFF, key in car
10:30 Disable audio amp - uncheck MOST with OBDeleven
14:10 Start the MMI firmware update from hidden menu
16:00 System update in progress - don't touch anything!
19:05 Update summary
19:35 SVM fault code screen - ignore of fix later
21:10 reenable MOST and Bose/Bang&Olufsen amplifier
22:25 Fix B201A fault code with OBDeleven
25:15 Check if new MMI firmware was installed
26:00 Previous patches will be overwritten

Seat/Cupra Ateca cabin fusebox location (cigarette lighter 12V outlet)

mr-fix 2024-02-10 | Where is cabin fusebox in Seat / Cupra #Ateca, how to locate 12V power outlet (#cigarette lighter) #fuse? Cabin fuses are hidden behind small plastic cover next to the steering column. Check out how to access them without damaging clips.

ℹ️ Checking fuses is one of the basic diagnostic procedures when troubleshooting electrical issues.

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

0:00 Seat Cupra Ateca
0:10 cabin fusebox location
0:20 how to remove fusebox cover
0:40 cigarette ligher (12V outlet) fuse
0:50 ignition hot or permanent hot outlet logic
1:15 assembling the fusebox cover

$4 AirTag: car tracker working with Apple FindMy from AliExpress

mr-fix 2024-02-07 | Setting up the cheapest #AirTag from AliExpress as a #car tracker and personal locator. Surprisingly it works just like a genuine Apple product, connects with Apple FindMy network. Device does not require data plan, WiFi, nor GPS. Single CR2032 battery powers the Bluetooth BLE chip which sends out #tracker beacon picked up by other Apple devices. Perfect for your car, backpack, suitcase, etc.

🛒 Buy $4 tracker on AliExpress: http://ali4cars.com/s/?p=apple-airtag-findmy-locator-tracker-aiyato
🛒 ali4cars.com/product/apple-airtag-findmy-locator-tracker-aiyato
🛒 http://ali4cars.com/r/?id=95
🔗 Learn more about Apple FindMy network: apple.com/airtag

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

0:00 $4 AirTag from AliExpress
0:15 AliExpress AirTag overview
1:05 Setting up with Apple FindMy app
1:55 How does it work without GPS, WiFi, SIM - Apple FindMy Network
3:25 Track your car, backpack, etc.
4:20 Trigger sound to locate your keys
4:55 90% original AirTag features

Xinfrared XH09: thermal camera for iOS/Android but not for automotive

mr-fix 2024-02-05 | Testing if XH09 thermal camera is any good when it comes to automotive applications - testing A/C vents, seat heating elements, coolant lines. This device is not targeted at automotive technicians but would be cool as a hunting and survival gear with narrow FOV and speed/position HUD.

🔗 Online stores: https://linktr.ee/XinfraredOnlineStore
🎟️ 10% off code: CJEMURF4
📺 InfiRay P2 Pro review: youtu.be/07aYMXLXoS8

0:00 Xinfrared HX09 thermal camera
0:35 Thermal camera assembly and application
2:05 Narrow FOV - high zoom
3:05 User interface - photo/video, themes, aiming aid, PIP
4:00 HVAC vents heater diagnostics
4:40 Seat heating diagnostics
5:25 Coolant lines, turbocharger, DPF, ATF cooler,
6:25 Photo/video gallery of thermal data
7:25 Thermal camera made for hunters: directions, GPS position, speed, aiming aid

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

Free Skoda MIB2 firmware update with download link (Columbus Amundsen Bolero)

mr-fix 2024-01-15 | How to update firmware in Skoda Bolero, Columbus, or Amundsen MIB2 system for free. Check the tutorial and install latest software in your radio/navigation system. Here you will see how to go from MST2_EU_SK_ZR_P0475T to the most recent MST2_EU_SK_ZR_P0480T SW Train which brings bug fixes and stability improvements. This and similar units were installed in Octavia, Fabia, Superb, and other Skoda cars with the same update procedure.

⚠️ Warning! You are doing it at your own risk! This DIY procedure can overwrite custom system modifications like CP-OFF patch, CID-Lock, SWaP patch, custom skins, dual-navi patch.

⚠️ Make sure your cars battery is in good shape, use external power source, or turn the engine on for the update process to make sure that voltage drops will not interrupt firmware update. Also make sure that your touch screen is working correctly.

🛠 Skoda MIB firmware update procedure
1. Enter hidden menu and check your current SW train. Check on mib-helper.com if you have the latest one.
2. Find and download latest supported firmware update for your Skoda on mibsolution.one (user and password: guest).
3. Use 8GB or larger SD card, format it with FAT32 file system with the smallest allocation size available.
4. Extract and copy firmware update files to the root directory of the SD card.
5. Remove SD cards from the main unit and insert update SD into SD1 port.
6. Press and hold MENU button for 3 seconds, select "Software update/versions", "Update", "SD card", select firmware, press "Start" and "Next".
7. Wait patiently. Main unit will reboot 3 times before the new firmware is installed.
8. When the installation is complete you can press the arrow in the upper-right corner, "Cancel". Unit will reboot one final time.
9. Press and hold MENU button to confirm that the unit is running new firmware version now.
10. Use scan tool like OBDeleven or VCDS to clear the B201A fault.

📺 Fix B201A fault: youtu.be/0tpPm-ucAwc
📺 Exit update with broke touch: youtube.com/watch?v=ocxY9fMtIkU
🛒 Buy OBDeleven here (ref): http://mr-fix.info/redirect/obdeleven
🎟 Get 10% OFF with code: MRFIX10

ℹ️ MIB units are made by several vendors - Harman, Delphi, Technisat/Preh, Panasonic, LG, Qualcomm. Each vendor is developing its own firmware version and release its own updates.

ℹ️ MIB units have different generations - MIB1, MIB2, MIB3...; Different tiers - Entery, Standard, High, Premium...; Separate releases for different platforms - ZR and PQ; Separate regions - EU, NAR, JP, KOR, RoW... Each car manufacturer has its own brand-specific versions - Audi, Volkswagen, Seat, Skoda, Porsche, Bentley... Each generation, tier, platform, car brand combination its using its own firmware version.

ℹ️ MIB2 Technisat/Preh unit running firmware 02xx will allow you to install only other 02xx firmware version. It is possible to install higher versions (03xx and 04xx) but some system modifications are required. 0254 Is the latest version released for VW ZR units 02xx

0:00 Skoda MIB2 Bolero radio
0:15 Check if touch screen is working correctly
0:40 Check currently installed firmware SW Train
1:30 Find and download free firmware update for Skoda radio navigation
3:00 Prepare SD memory card with downloaded firmware update
3:55 Prepare Skoda MIB2 unit for new software
5:30 Start free firmware update and wait
8:30 Recovery / emergency partition flashing
9:40 Software update summary
10:55 Check if new firmware was installed correctly

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

Audi Q3 (8U) where is engine code?

mr-fix 2023-12-16 | How to check engine code in #AudiQ3 8U without diagnostic interface and without the equipment sticker? There's a simple way with instrument cluster hidden menu that will show you the engine code identification stored in the ECU. Turn the ignition on, select Board Computer, press and hold daily trip reset button and wait for about 10 seconds for the #engineCode to appear instead of the total mileage of your #Audi.
This method does not require diagnostic interface like OBDeleven or VCDS.

http://mr-fix.info/
facebook.com/mrfixpl/
instagram.com/mrfixpl/
patreon.com/mrfixpl

0:00 Audi Q3 1st gen (8U)
0:10 Prepare instrument cluster and board computer
0:35 Alternative: use OBDeleven, VCDS, check equipment sticker
0:55 Select total mileage
1:10 Press and hold trip reset button
1:25 Engine code is visible on the instrument cluster

🔥 #DPF status via #CarPlay

mr-fix 2023-11-27 | ...

Wireless CarPlay & Android Auto - Cut the Cord with CarlinKit 5.0 2air

mr-fix 2023-10-21 | Say goodbye to wires with CarlinKit 2air: #CarPlay and #AndroidAuto #wireless adapter. Easy upgrade for your car, seamless integration for your iPhone or Android phone. Quick review, pros and cons. Long story short: that's the one to get right now!

🎟 18% OFF with discount code: MRFIX
🔗 Buy it here: carlinkitcarplay.com/products/carlinkit-2air-make-your-wired-carplay-wired-android-auto-to-wireless

🔍 Compare CarlinKit 2air with other wired-to-wireless CarPlay adapters:
docs.google.com/spreadsheets/d/1EMCOfEgc6PSrUTRv7o8LPsh3WMs2J6uXPPXKCg-_vHo

👍 Pros
Plug & play installation,
Very quick boot up,
Support for both wireless CarPlay and AndroidAuto,
Single-tap firmware upgrade,
Advanced settings for GPS, fps, sound quality, wireless buffer,
Clean design and small form factor.

👎 Cons
Random flashed of the status LED illumination,
I was not able to make it to work in Renault R-Link system,
Advances settings user interface in SciFi style.

🛠 Tech Specs
Device: CarlinKit 5.0
Model name: CPC200-2air
WiFi: 2.4 and 5.0 GHz
Supported protocols: wireless CarPlay and wireless AndroidAuto

0:00 CarlinKit 2air
0:10 CarlinKit 5.0 wireless CarPlay adapter
0:30 Unboxing: adapter, USB cables, user manual
1:30 Plug&Play installation
1:50 Very fast boot up
2:20 Testing 6 methods of user input
3:55 Wireless range test: the trunk test
4:30 Advanced settings: sound quality, buffer, GPS passthrough
5:40 Seamless integration with your car
6:00 Pros and cons
6:00 18% discount with MRFIX code

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

Best thermal camera for iOS? Xinfrared InfiRay P2 Pro test

mr-fix 2023-09-18 | Quick test of small but precise #thermal camera that's available with Apple Lightning or USB-C connector. I've check it with an #iPhone 11 and inspected cars A/C air vents, checked engine bay temperatures (coolant fluid reservoir, fuel lines, battery, turbocharger, N75 control valve), and inspected up close RaspberryPi4 with micro #camera lens which is attacked magnetically.

🛒 AliExpress: https://s.click.aliexpress.com/e/_DlM4pgP
🛒 US: amazon.com/dp/B0BG2QC143
🛒 CA: amazon.ca/dp/B0BJ1W6BBH
🛒 UK: amazon.co.uk/dp/B0BG2Q8KWN
🛒 GE: https://www.amazon.de/dp/B0BK92BRHL
🛒 FR: https://www.amazon.fr/dp/B0BK95GSLV
🛒 SP: amazon.es/dp/B0BK8S26VR
🛒 IT: https://www.amazon.it/dp/B0BK99D1X5
🎟 use code "MRFIXPL" and get 20$ off

👍 PROS
Really small size
Plug & play - takes you to app store
Great micro lens with magnetic adapter
A lot of useful professional thermal measuring features (point, line, zone)
PIP (picture-in-picture) with build-in camera image.
Video recording
Lot of environmental variables to adjust the measurement quality

👎 CONS
Does not record sound on videos
Looks fragile, like a piece of jewelry

🛠 TECH SPECS
Brand: Xinfrared
Model: InfiRay P2 Pro
Connector: Lighting (for Apple iOS) or USB-C (for PC, android)
Water Resistance Level: IPX4
256 by 192 pixels IR sensor
P2 Pro Measurement range: -20 to 550℃
Accuracy: ±2℃
Frame rate: 25Hz

0:00 Thermal camera for iOS
0:05 Xinfrared InfiRay P2 Pro Unboxing
1:40 Connect thermal camera with Apple iOS iPhone
2:15 Thermal camera application user interface walkthrough
3:50 Professional measuring tools
4:45 Checking A/C vents temperature
6:05 Coolant, turbo, fuel line temperatures
9:00 Inspecting RaspberryPi4 with micro lens
10:05 Pros and Cons of InfiRay P2 Pro

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

How to exit firmware update on MIB touch not working (VW Seat Skoda)

mr-fix 2023-09-14 | #Touch screen not working in VW, Seat, or Skoda will cause MIB2 #firmware update to stuck if you can't press the back arrow in top-right corner. Rebooting the unit will not help, but there are ways to fix this issue and complete the #MIB2 software update procedure.

🛒 Buy OBDeleven here (ref): http://mr-fix.info/redirect/obdeleven
📺 OBDeleven review: youtu.be/_X-HYkpah-0

💻 Use diagnostic tool like OBDeleven and follow the procedure:
Module 5F → Adaptation → Confirmation of Installation Change
Copy current value of the key in this adaptation channel.
Go to I'm So XORy online calculator: http://mib-helper.com/im-so-xory
Paste the key and generate new one.
Input new key into the adaptation channel and save it.

⚠️ New value will not be stored in the adaptation channel and application will hang. That's normal.
ℹ️ Unit should reboot automatically, but you can do it manually if it's not happening on its own.
ℹ️ On some units (most likely PQ units) you can use the VOICE button to skip this screen. Try pressing it shortly or press and hold for couple seconds.

0:00 VW firmware update finish
0:20 touch not working - update stuck
0:40 MIB reboot not helping
1:00 try VOICE to exit update
1:30 OBDeleven with PRO license
1:50 Calculate new key with I'm so XORy
3:05 VW MIB unit fixed with OBDeleven

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

MIB2 navigation display purple lines fix VW Seat Skoda

mr-fix 2023-08-31 | How to disable purple bounding boxes in #MIB2 infotainment display. If you #VW, Seat, #Skoda have those lines visible, you most likely have unintentionally used the button shortcut to enable one of the developer tools. Press and hold TRAFFIC for 10 seconds to disable it. You can also go to hidden menu and disable it from the HMI debug submenu.

🛒 Buy OBDeleven here (ref): http://mr-fix.info/redirect/obdeleven

💻 Coding procedure
Module 5F → Diagnostic Session → Developer Mode
Module 5F → Adaptation → Development Mode → Active

ℹ️ This video was made in Volkswagen Golf MK7 equipped with MIB2 Discover Media system. The same or similar procedure will apply to VW Discover Pro, Skoda Columbus, Skoda Amundsend, Seat 6P0, Seat Navi Pro.

⚠️ Hidden menus and developer modes contain options that are potentially dangerous to the system if used carelessly. Please make sure that you know what you are doing.

0:00 Purple lines on navigation display
0:20 developer tools and widget bounding boxes
1:15 disable purple boxes with TRAFFIC button
1:40 disable purple boxes from hidden menu

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

Audi MMI fix broken joystick with control wheel repair kit (A4 A5 Q5 A6 Q7)

mr-fix 2023-08-26 | How to repair broken #joystick in the Audi #MMI control wheel. This small part often breaks and requires to be replaced. Luckily there's a cheap #repair kit available for both matte and glossy trims. You can find it on AliExpress for around $2.

🛒 http://ali4cars.com/s/?p=audi-mmi-control-wheel-joystick-repair-kit
🛒 http://ali4cars.com/r/?id=92

ℹ️ This MMI repair kit should fit any Audi vehicle with MMI 3G (BNav, Hnav) and 3G+/3GP (HN+) system. Including Audi A4 B8, A5 B8, Q5 8R, A6 C6 4F, Q7 4L.

0:00 Audi MMI control panel with broken joystick
0:15 Repair kit from AliExpress
0:35 Remove remaining of the old joystick
1:10 Insert new rubber seal
1:35 Clean the MMI wheel, while you can
1:50 Install new MMI joystick
2:30 Test if you can scroll maps with MMI Joystick

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

Dont buy CarlinKit TBox AR - android dashcam review

mr-fix 2023-06-25 | 11 reasons not to buy #CarlinKit TBox AR.all-in-one dashcam, android box, and wireless CarPlay/AndroidAuto adapter. I've been testing this product for couple months and I can honestly say that this is device is faulty by design. It does not function well as any an Android Box, #dashcam, nor the wireless adapter. It has problems with image quality, recording stability, system performance, boot up time, there's no parking mode, saving videos is difficult, there's no support for cars without touch screen.

✌️ Instead I do recommend getting CarlinKit 4.0 wireless adapter AND a separate stand-alone dashcam.

📺 CarlinKit 4.0 review: youtu.be/7DO49LDcHq8

👍 PROS of CarlinKit #TBox AR
all-in-one device for clean installation
Easy installation - single wire for power and comm
a lot of features (wireless CP/AA, video player in motion, internet connection, Google Play Store)

👎 CONS of CarlinKit TBox AR
Boot up speed is too high - skips short trips!
Video freezes for couple seconds
low bitrate = artifacts and glitches, noise in low-light conditions
Marking emergency footage is difficult and takes too long
No parking mode - no power when parked
Requires additional memory card - does not store footage to internal memory
Can't use system UI if car not equipped with touch display
android-related stability issues - mostly CarPlay related
using internal mic for Siri - low quality HFP instead of A2DP
ports on top - can't install as high as want/need
port icons not visible from inside
one-time use sticker mount - can't reposition/switch vehicles

🛒 carlinkitcarplay.com/products/t-box-ar-android-9-0-system-carplay-hd-dash-cam-1080p-ai-box
🎟 use code "MRFIX" and get 18% off
💲 $189.99 ($155.80 after discount)
🔗 carlinkitcarplay.com

0:00 CarlinKit TBox AR android dashcam
0:30 Box content
0:50 Android Box + Dash Cam + wireless CarPlay adapter
1:15 Tech specs
2:10 Easy installation
3:00 Controls from the infotainment display
4:30 Dash cam sample footage
5:40 Slow boot up
8:00 Missing footage
8:30 Low framerate, image noise
9:00 glitches
9:20 hard to save emergency videos
10:25 no parking mode
10:50 memory card required
11:30 can't control it without touch screen
13:20 USB port placement
13:40 port labels on the wrong side
14:00 Only permanent installation
14:55 Get separate dash cam + CarlinKit 4.0 adapter instead

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

Start Audi engine with KESSY dead battery (A3 A4 A5 A6 A7 A8 Q3 Q5 Q7)

mr-fix 2023-06-07 | How to use Audi Keyless Entry, Start and Exit system (KESSY) with dead battery and start the #engine in an emergency situation. This tutorial shows Audi A3 8V and remote without a #battery. Key is not recognized by the car but there's a procedure to start the engine with dead battery inside #KESSY.

ℹ️ You need to locate the key symbol somewhere in the vehicle (on the steering column cover, on center console, inside glovebox, in cupholder), place the KESSY key over there, and press the engine start/stop button at the same time. Receiver antenna should pick up the immobilizer signal from the remote and allow to start the engine.

🚗 This video was made in Audi A3 8V, but applies to most of the Audi vehicles with KESSY system. Location of the signal receiver might be different, but the method itself is the same for other models. Including, but not limited to: A1, A4, A5, A6, A7, A8, Q2, Q3, Q5, Q7, Q8, TT, R8.

0:00 Audi KESSY remote
0:15 Dead battery inside the key
0:35 Place remote next to the signal receiver
0:50 turn on the ignition and start the engine

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

Audi A3 (8V) how to check engine code

mr-fix 2023-06-05 | Simple way of checking engine #code in #Audi A3, without opening the hood, without going though equipment sticker, without diagnostic interface, nor without submitting VIN. You can get it from the instrument cluster - both Virtual Cockpit and classical instruments. With the ignition on, simply press and hold daily trip reset button and wait about 15 seconds for the #engine code to appear instead of the total mileage. This "hidden menu" will disappear on its own after couple seconds.

0:00 Audi A3 8V
0:10 Audi Virtual Cockpit
0:20 press and hold trip reset button
0:45 engine code instead of total mileage
1:00 engine code on the engine timing chain cover

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

Audi A3 (8V) Virtual Cockpit hidden green menu (VC GEM)

mr-fix 2023-06-02 | Hidden service mode in #Audi A3 8V digital instrument cluster (Audi #Virtual Cockpit) with green engineering menu. How to tutorial to enable developer mode, enter #hidden menu with steering wheel button combination, and browse system options and adjustments. First you need to enable developer mode with diagnostic tool like OBDeleven. Next press and hold OK wheel and NAVIGATE RIGHT button on the steering wheel. After couple seconds you should see green menu on the digital instrument cluster display.

🛒 Buy OBDeleven here (ref): http://mr-fix.info/redirect/obdeleven

💻 Coding procedure
Module 17 → Diagnostic Session → Developer Mode
Module 17 → Adaptation → Developers Menu → Active

ℹ️ Some newer vehicles have safety mechanism which requires you to open the hood before making any coding or adaptation changes. Make sure that the hood is open before connecting diagnostic interface.

⚠️ Hidden menus and developer modes contain options that are potentially dangerous to the system if used carelessly. Please make sure that you know what you are doing.

0:00 Audi A3 8V with Virtual Cockpit
0:20 open the hood before coding / adaptation
0:45 connect OBDeleven
0:55 developer mode coding / adaptation procedure
2:10 button combination for hidden menu
2:40 Green Engineering Menu (GEM) in Audi Virtual Cockpit (VC)

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

VW MIB2 car image coding, change vehicle picture

mr-fix 2023-05-24 | How to change car image in #Volkswagen after #MIB2 system retrofit to match actual vehicle variant. Check popular picture coding options and #OBDeleven examples. Module 5F stores vehicle brand, model, generation, variant, and variant supplement. If you set those values correctly, you will see on the display the correct vehicle image. Those settings will be shown in board computer, climatronic menu, sound fader-balance, background lights, parktronic / rear view camera, and number of other options that are displayed on the infotainment screen.

🛒 Buy OBDeleven here (ref): http://mr-fix.info/redirect/obdeleven

💻 Coding procedure
Module 5F → Long Coding → Bytes: 00, 01, 02

ℹ️ Volkswagen vehicle model, generation, variant, and supplement coding options
02 13 06 - Volkswagen Tiguan (5N)
02 62 00 - Volkswagen Polo MK6
02 63 01 - Volkswagen Jetta
02 72 00 - Volkswagen Polo MK7
02 72 06 - Volkswagen T-Roc
02 73 00 - Volkswagen Golf MK7 Hatchback
02 73 01 - Volkswagen Jetta
02 73 02 - Volkswagen Golf MK7 Variant & Alltrack
02 73 06 - Volkswagen Tiguan MK2
02 73 08 - Volkswagen Touran
02 73 10 - Volkswagen Golf MK7.5 Hatchback
02 73 12 - Volkswagen Golf MK7.5 Variant/Estate
02 73 70 - Volkswagen eGolf MK7
02 74 04 - Volkswagen Passat CC
02 84 01 - Volkswagen Passat (B8) Sedan
02 84 02 - Volkswagen Passat (B8) Variant/Estate
02 84 03 - Volkswagen Arteon

🔗 source and reference: https://mibwiki.one/doc/5f-vehicle-variants-vb9CLxH2Zp

0:00 VW MIB2 infotainment
0:15 car image used in MIB2 infotainment system
1:20 OBDeleven PRO connected to Volkswagen
1:45 MIB2 long coding
2:05 02 73 12 - Volkswagen Golf MK7.5 Estate
2:30 02 73 08 - Volkswagen Touran
3:30 02 84 01 - Volkswagen Passat (B8) Sedan
4:20 02 73 02 - Volkswagen Golf MK7 Variant & Alltrack

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

VW Seat Skoda Audi: how to get VCRN from MIB1 MIB2 MIB3

mr-fix 2023-05-17 | How to check #VCRN in MIB units in Volkswagen, Audi, Seat, Skoda and other VAG vehicles. You can do it from hidden menu (service mode) or via diagnostic tool. Sometimes FEC/SWaP menu is not available if the MIB developer mode is not enabled. In that case you can activate it with #OBDeleven or #VCDS, or simply use diagnostic scanner to check the VCRN in module 5F live data.

🛒 Buy OBDeleven here (ref): http://mr-fix.info/redirect/obdeleven

💻 Procedure for diagnostic scanner
Module 5F → Live Data → pid: "individualization characteristics"

📺 Enabling developer mode in MIB2: youtu.be/R9WlrkBioi8

ℹ️ VCRN is used in all MIB units (MIB1, MIB2, MIB2.5, MIB3...) from the VAG VW Auto Group: Composition Color, Discover Color, Discover Pro, Bolero, Amundsen, Columbus, Audi MMI, Seat Navi Pro Porsche PCM, and other.

0:00 VAG (VW Audi Seat Skoda) MIB1/MIB2 unit
0:15 display and main unit in the glove box
0:45 VCRN is not on the sticker
1:00 Check VCRN in hidden menu
1:40 Service mode FEC/SWaP only with developer mode
1:55 Check VCRN with OBDeleven or VCDS
3:15 VCRN should be 10-digits long

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

Check DSG gearbox oil/fluid temperature

mr-fix 2023-05-15 | How to read DSG transmission fluid #temperature with diagnostic interface. I'm using OBDeleven with DQ250 #DSG (S-Tronic) gearbox in 2015/16 VW Golf MK7 (5G) to show how to connect with the TCU and which PIDs to select from the live data list of parameters.

🛒 Buy OBDeleven here (ref): http://mr-fix.info/redirect/obdeleven

💻 Procedure
Module 02 → Live Data → pid: "transmission fluid temperature"
Module 02 → Live Data → pid: "clutch temperature air / splash oil"

ℹ️ While replacing transmission fluid / oil, you should keep the temperature within certain range to follow the procedure correctly. Performing basic settings calibration on the gearbox also should be done with correct transmission temperature. You can also use this to control DSG gearbox temperature on track.

🚗 DQ250 gearbox was installed in variety of VAG vehicles, including (but not limited to) VW Golf, VW Passat, Skoda Octavia, Skoda Superb, Audi A3 8V, Seat Leon. Audi used S-Tronic trademark for the dual-clutch transmissions.

0:00 How to check DSG temperature
0:10 DSG DQ250 6-speed
0:20 Needed for ATF change, basic settings, track racing
0:40 OBDeleven procedure
1:25 DSG temperature readout
2:05 "Gear Stuck" fault codes are normal

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

XTOOL D7 Car Diagnostic Tool - can it do all?

mr-fix 2023-05-14 | Is XTOOL D7 the best tablet car #scanner now? Looked for pros & cons, ups & down in VW, BMW, and Fiat. Made full fault scans, tried guided procedures for EPB and service reset, checked live data like ATF temperature, DPF state, fuel pressure, injector corrections, forced output tests of instrument cluster, fixed missing basic settings of sunroof. Great device for vehicle diagnostics and repairs. One thing that I noticed missing over here is VAG coding option, which is one of the essential things required for working with VW/Audi/Seat/Skoda vehicles, for example when replacing modules or when enabling & tweaking new features.

🚗 In this test and review you can see XTOOL D7 connected 2015 VW Golf MK7, 2010 BMW X1 E84, 2009 Fiat Grande Punto VAN. I've also tested the diagnostic scanner in 2012 Audi S6 C7 (4G), 2012 Audi Q3 (8U), Porsche Cayenne, Opel Speedster, Mitsubishi Outlander, Fiat Ducato, Citroen C3 III, and more without any issues. Looks like the tool is #universal.

🎟 Discount coupon code: 08MRFIXD7
🛒 US: amazon.com/dp/B098LF38DS
🛒 CA: amazon.ca/dp/B0BZPLTHR3

👍 PROS
Supports all brands with their individual protocols (85+ manufacturers)
Supports a lot of guided procedures (35+ special functions)
Supports universal #OBD2 protocol
Supports bi-directional tests (live data and actuator output tests)
Big and bright 7-inch display, with multitouch
Strong body + safe caring case
Works very long on battery + charges via OBD and USB
Build-in WiFi but also works offline
Easy to keep it updated - frequent OTA updates
Online support via remote access (TeamViewer)
Live data recording for later playback
Report simple sharing via e-mail
Full android system access + 3rd party apps option

👎 CONS
No coding option for VAG vehicles
No dark mode - display very bright
Not an IPS display - narrow viewing angles
Changing language requires license update on the server side

Special functions include: key programming, odometer correction, power balance calibration, language change, EPB release, throttle body adaptation, transport mode, steering angle sensor learning, injectors coding, TPMS reset, oil service, rain & light sensor calibration, battery programming, gearbox reset, suspension calibration, clutch adaptation, start/stop system reset, speed limiter settings, control module reset, windows and sunroof calibration, A/C relearn, SRS reset, tire upgrade.

0:00 XTOOL D7 diagnostic interface review
1:00 car scanner android tablet
1:35 case with manuals, UBS & OBD2 cables, adapters
2:05 menu overview: scan, update, special functions, reports
3:20 VW Golf MK7 full fault scan
7:40 Oil and Service maintenance reminder reset
9:15 Electric Parking Brake (EPB) release for pads replacement
12:15 DSG oil temperature live data
15:25 Fuel Pressure live data
16:40 BMW X1 E84 full fault scan
19:00 BMW DPF live data
20:15 Instrument Cluster output test
20:55 Panoramic Sunroof calibration basic settings
21:55 Fiat Grande Punto Van full fault scan
23:20 Injector correction live data
25:35 Speedometer output test
26:05 PROS: brands, functions, reports, playback, updates
29:30 CONS: no VAG coding, language change, subscription expiration
33:30 Get on Amazon with discount code 08MRFIXD7

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

VW Golf MK7 (5G) camera image from parktronic button

mr-fix 2023-05-11 | Rear view #camera (RVC HIGH) coding in VW Golf MK7 for parktronic #button image trigger. You will be able to turn on the camera image on the navigation display without putting the car into reverse gear. Just with a press of a button. Check out this simple coding procedure and follow the tutorial in your #VW car. This feature is available for highline camera only. It will not work with RVC LOW, as lowline camera is not available as separanet CAN-BUS network module and does not have any coding/adaptation options.

🛒 Buy OBDeleven here (ref): http://mr-fix.info/redirect/obdeleven

💻 Coding procedure
Module 6C → Long Coding → Byte: 04 → bit: 1 → enable

0:00 VW with RVC High camera
0:20 no control via parktronic button
0:30 OBDeleven coding tutorial
1:10 test if tweak is working
1:30 RVC HIGH vs RVC LOW

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

VW Golf MK7 (5G) MIB2 grid layout menu activation

mr-fix 2023-05-08 | How to enable #facelift grid menu in MIB2 #VW Media infotainment system. If you are running facelift firmware, you can switch between old and new #skin from the hidden menu. New skin was designed for newer larger 8 inch glass displays. Other than menu, you can also notice smaller fonts, 6 radio presets, 6 favorite contacts in phone. You can switch between skins from the hidden menu which is accessible if you have the developer mode enabled.

ℹ️ For Technisat/Preh unit you need firmware from the 04xx family. Latest one is P0480T.

ℹ️ The same procedure will apply to other Volkswagen vehicles with MIB2 system: Polo, Passat, Arteon, Crafter, Tiguan, Touran.

🛒 Buy OBDeleven here (ref): http://mr-fix.info/redirect/obdeleven

📺 Enable developer mode in MIB unit: youtu.be/R9WlrkBioi8

💻 Developer Mode activation procedure
Module 09 → Diagnostic Session → Development
Module 09 → Adaptation → developer mode → Activated

0:00 VW Discover Media system
0:15 facelift MIB2 firmware
0:30 developer mode with OBDeleven or VCDS
0:45 changing skin in hidden menu
1:30 more radio presets and favourite contacts

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

Missing CarPlay & AndroidAuto fix after activation patch MIB2

mr-fix 2023-05-06 | Fix missing #CarPlay and #AndroidAuto in AppConnect, FullLink, SmartLink menu in your MIB2 system after activation with SD or Toolbox. All you need is #OBDeleven or VCDS to complete the activation. Sometimes, even if the activation was successful, you still need to adjust couple options with diagnostic interface via OBD2 connector to make sure that everything will work OK in your Volkswagen, Sear, or Skoda car with MIB2 system.

🛒 Buy OBDeleven here (ref): http://mr-fix.info/redirect/obdeleven

📺 MIB2 Technisat activation with MST2 Toolbox: youtube.com/watch?v=a9uwYmBPc1Q
📺 MIB2 Harman More Incredible Bash: youtube.com/watch?v=eAQgzYlnSrA
ℹ️ MIB2 Delphi Congo&Duke SD activator: http://mib-helper.com/show.php?all=activators

ℹ️ This tutorial was made in VW Golf with MIB2 Discover Media system made by Technisat/Preh but the same procedure applies to other VAG vehicles with MIB2 units: VW Discover Pro, Skoda Columbus, Skoda Amundsen, Seat Navi Pro, Seat Navi 6P0.

💻 Coding procedure
Module 5F → Adaptation → Vehicle Configuration:
→ Apple DIO → ON
→ Google GAL → ON

0:00 CarPlay and AndroidAuto missing after activation
0:35 OBDeleven PRO or VCDS for coding and adaptation
0:50 CarPlay and AndroidAuto coding
1:50 Confirm if adaptation fixed the issue
2:00 Test AppConnect / FullLink / SmartLink

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

VW Golf MK7 (5G) Background lighting ambient lights menu activation

mr-fix 2023-05-04 | How to enable #ambient light menu in #VW Golf MK7 using OBDeleven. This will change old sliders layout of the interior lights to the new Background Lighting #menu for ambient illumination. Quick coding and adaptation change in BCM and MIB will activate new menu with cogs/suns to control brightness of different light zones. The same procedure can be done with VCDS.

🛒 Buy OBDeleven here (ref): http://mr-fix.info/redirect/obdeleven

📺 Footwell lights retrofit youtu.be/XTiLrowY7Z0
📺 Door cards with ambient lights retrofit youtu.be/lLTObesWtUQ
📺 Cup holder lights retrofit youtu.be/hXHpo66rXWo

💻 Coding procedure
Module 09 (Security Access: 31347) → Adaptation:
→ Interior light, light configuration → Ambientemenue mit alle Zonen → active
→ Interior light, light configuration → Ambientemenue mit globalem aus → active

For pre-facelift vehicles, if the Background Lighting menu has no image, you can try to change vehicle configuration to facelift model and check if that helps.
Module 5F → Long Coding → Byte: 2 → bit:4(Car Derivate Supplement) → 1

0:00 VW Golf MK7
0:10 old menu with sliders
0:20 footwell, door trim, cup holder lights
0:45 OBDeleven PRO to perform change
1:00 coding and adaptation procedure for BCM
1:55 procedure for VCDS is almost the same
2:10 new background light menu available but empty
2:40 change MIB2 coding to facelift car
3:30 Golf MK7 facelift graphics
4:00 Background ambient light menu functional
4:20 Cup holder not available in Golf

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

Free 2023/2024 maps update for VW Seat Skoda

mr-fix 2023-05-02 | Download and update GPS navigation for #free in your #Volkswagen, Seat, Skoda with the 2023/2024 #maps. Check which version you already have, which system your car is equipped with, download latest maps, copy them to SD or USB drive, and perform navigation database update.

ℹ️ Press and hold MENU button for 3 seconds, go to "Software Update/Versions", and check your SW Train. This will tell you which infotainment system you have in your vehicle. Type in this information in http://mib-helper.com and scroll down to "GPS navigation maps updates" section. Select desired map, download it, extract it, copy it to SD card, and place it in infotainment main unit in your VW, Seat, or Skoda car.

📺 CID Lock removal on MST2 Technisat: youtube.com/watch?v=ZOf-XEYhFbQ

All VAG (VW, Audi, Seat, Skoda, Lamborghini, MAN, Bentley) maps: http://mib-helper.com/show.php?all=maps
7zip: 7-zip.org/download.html
Free Download Manager: freedownloadmanager.org/download.htm

ℹ️ Those update packages were designed for system: VW Discover Media, Skoda Amundsen, Seat Navi 6P0, VW Discover Pro, Skoda Columbus, Seat Navi Pro, MIB2 Audi MMI.
MSTD = MIB1 Standard
MST2 = MIB2 Standard
MHIG = MIB1 High
MHI2/MHI2Q = MIB2 High

0:00 MIB2 VW Discover Media (MST2)
0:15 Check currently installed maps
0:40 Check infotainment unit version (MIB Standard or High)
1:30 Remove SD card from car
2:10 Go to mib-helper.com
2:40 VW maps free download
3:20 Other maps for VW, Audi, Seat, Skoda
3:55 Format SD card or USB drive with FAT32
5:20 Copy new maps to SD or USB
5:58 Run new GPS navigation maps in car
7:00 Confirm 2023/2024 maps installed

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

VW Golf MK7 (5G): cup holder ambient light coding & wiring

mr-fix 2023-04-24 | How to retrofit DIY cup holder #ambient lights & front cubby #LED illumination, enable it with OBDeleven or VCDS in #VW Golf MK7, including coming/leaving home illumination and slider controls from Volkswagen Discover infotainment system screen. This is not just a piggyback connection to footwell lights or dashboard backlight. This was wired as independent BCM (body control module) circuit, coded with it's own controls, brightness, and logic.

ℹ️ This tutorial is based on my own research and documentation that I found related to Audi A3 8V with interior lighting package. Same procedure should work for all other MQB platform vehicles, including Seat Leon MK3 (5F), Skoda Octavia 3 (5E). This tutorial might not be 100% accurate and may be updated in future. Some coding and adaptation changes might differ because of the production year, software versions, or vehicle trim version. Required coding procedure might be adjusted for facelift vehicles.

⚠️ Warning! You are doing this modification at your own risk. This modification may void your cars warranty. This modification might cause vehicle damage. Any modification to the electrical system are potentially dangerous and might end with electrical fire.

🛒 Parts
Extra thin LED strip (White 6500K): https://s.click.aliexpress.com/e/_DERWotr
BCM terminal: https://s.click.aliexpress.com/e/_DBR214Z
Isolation tape: https://s.click.aliexpress.com/e/_DFKMDIl
Wires, zip ties.

🛠 Tools
Diagnostic computer (VCDS or OBDeleven: http://mr-fix.info/redirect/obdeleven )
Torx and flat drivers
Prying tools: ali4cars.com/product/interior-removal-toolset
Terminal crimping tool
Cutter and precise knife

📺 Related videos that you should watch first
VW Golf MK7 cabin fusebox location: youtu.be/mw4wC7yznSI
VW Golf MK7 Rear USB ports retrofit: youtu.be/tLZcmenU7Pw
VW Golf MK7 footwell lights wiring: youtu.be/XTiLrowY7Z0
VW Golf MK7 RVC High wiring: youtu.be/oYKR06io0nM

🔌 Wiring connection
Ground to any chassis ground point.
Positive to empty and active pin in BCM. In my case that's plug C, pin 9.

💻 Coding and Adaptation
Module 5F (Security Access: 20103) → Adaptation:
→ Car Function list BAP Gen2:
→ → Interieur light 0x08 → Activated
→ → Interieur light 0x08 msg bus → Comfort data bus
→ Car Function adaptatations Gen2
→ → menu display ambient illum. → activated
→ → menu display ambient illum. over threshold high → activated

Module 09 (Security Access: 31347):
→ Long Coding → Byte 17 → bit 2 (Ambient Cupholder Lights) → installed
→ Adaptation:
→ → Interior light, light configuration → Cockpitbeleuchtung → installed
→ → Int. light, 2nd generation → Aufloesung dimmzeit → 0.1s
→ → Int. light, 2nd generation → Helligkeit Cockpitbeleuchtung nicht berechnen → not active

Module 09 (Security Access: 31347) → Adaptation → LeuchteXX
→ Lasttyp → 46 - LED Kleinleistung
→ Lichtfunktion A → Ambientelicht 2
→ Dimmwert AB → 100(%)
→ Lichtansteuerung HD AB → Always

Module 09 (Security Access: 31347) → Adaptation → Interior lighting, parameter:
→ P t * cockpit → 0 (s)
→ P adaption kundenwunch cockpit → 14
→ P helligkeit Fzg geschlossen zuendung ein cockpit → 126%
→ P helligkeit * cockpit → change all with default 100% to 25%

🛒 Buy OBDeleven here (ref): http://mr-fix.info/redirect/obdeleven

0:00 Golf MK7 cup holder with coming/leaving home
0:33 Prepared for coding with OBDeleven or VCDS
1:20 Cup holder light stripe and BCM terminal
1:50 BCM (body control module) location
2:25 Tools required
2:50 dashboard and center console disassembly
3:48 adding wiring to BCM connectors
4:22 Advantages of separate wiring circuit for cup holder
5:10 BCM connectors A, B, and C
5:25 finding empty and programable channel with OBDeleven
7:40 checking pin assigned to adaptation channel
8:40 test setup for cup holder (lasttyp, lichtfunktion, dimmwert)
11:03 proper coding of the Leuchte channel for ambient lights
12:10 checking MIB infotainment adaptation
13:20 enabling slider control for front background light
16:05 brightness adjustment for safety and comfort
19:05 time delays explained
20:15 confirm proper brightness in live data
21:25 cup holder lights demo at night

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

VW Golf MK7 (5G): front ISOFIX retrofit child seat mount

mr-fix 2023-04-21 | How to install front #ISOFIX mount for child seat in VW Golf #MK7 (5G). This #retrofit is an easy DIY that will take just couple minutes. Golf MK7 was never offered with front ISO-FIX bracket, but front passenger seat frame is prepared for the installation. I've source part from Audi A5 8T and installed it successfully in my Volkswagen. You will need the ISO-FIX bracket, two bolts, two nuts. Material cover is optional.

🔍 P/N: 8T0 817 088 E

⚠️ Please check your local laws to confirm is fitting this part in your vehicle is legal.

0:00 Front ISOFIX in VW Golf MK7
0:20 Passenger Airbag switch
0:38 8T0 817 088 E bracket for Audi A4/A5
1:00 VW Golf MK7 seat frame prepared for ISOFIX
1:22 Insert nuts into the passenger seat frame
1:35 Push bracket in place and insert bolts
2:15 Check if this is legal

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

BMW 5-Series G30: hidden diagnostic menu and engine temperature display

mr-fix 2023-04-18 | Hidden menu in #BMW 5-Series (G30) with direct data readout for oil and coolant temperatures, diagnostic tests of LEDs and LCD, fuel consumption correction factor #tweak, and more. This tutorial shows how to unlock the #hidden service menu, browse it, read data, perform tests, and exit it at the end.

ℹ️ This tutorial was made in BMW M5 F90.

0:00 BMW 5-Series G30 & M5 F90
0:15 Turn the ignition on
0:30 Enter hidden service menu
1:00 Check VIN
1:15 Calculate pin and unlock full menu
2:00 BMW full diagnostic hidden menu
2:20 Check oil and coolant temperatures
2:35 Estimated fuel consumption correction factor
3:05 Test all LED indicators and LCDs
3:30 Exit BMW hidden menu

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

VW Golf MK7 (5G) how to find engine code

mr-fix 2023-04-17 | Quickly check your engine #code in #VW Golf MK7 without diagnostic interface (OBDeleven or VCDS), without the equipment sticker, without actually looking at the #engine. Just turn the ignition on, press and hold trip reset button, and wait for about 20 seconds for the engine code to appear on the instrument cluster display. In my case it was CRLB. This engine code is 2.0TDI with 110kW/150PS of power.

ℹ️ This tutorial is for VW Golf MK7 and MK7.5 with traditional instrument cluster. Cars with AID/VC will use different method - with hidden service menu in Virtual Cockpit.

0:00 VW Golf MK7
0:10 Equipment sticker, engine block, diagnostic interface
0:30 Check engine code from instrument cluster.
1:10 Trim meter should go back to original reading

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

Ambient brightness controls #golfMK7 coded in with #OBDeleven

mr-fix 2023-04-17 | ...

VW #golfMK7 custom cupholder and cubby illumination #car #diy

mr-fix 2023-04-14 | ...

Seat Leon MK3 (5F) needle sweep activation

mr-fix 2023-04-11 | Activate simple tweak in Seat #Leon MK3 (5F) - needle sweep (#staging) will test gauges with ignition on. Enable it with via long coding with OBDeleven like in this tutorial. You can also use #VCDS or any other OBD2 diagnostic tool to turn on this feature. Coding procedure is the same.

🛒 Buy OBDeleven here (ref): http://mr-fix.info/redirect/obdeleven
🔗 More tweaks for your car: http://ilovecarmods.com

💻 Coding procedure
Module: 17 → Long Coding → Byte: 01 → Bit: 0 → enable

0:00 Seat Leon MK3 (5F)
0:10 OBDeleven coding needle sweep
0:45 Instrument Cluster staging test

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

XTOOL IP508: best OBD2 diagnostic tool in its class

mr-fix 2023-03-20 | Tested XTOOL IP508 diagnostic #scanner and in my opinion this is the #best OBD2 tool in its class that you can currently get. Tried it in number of vehicle, including VW, Renault, BMW, Fiat, Volvo, Audi. Checked guided functions, diagnostics scans, live data views, and other features. Each and every time I was pleasantly surprised with how well this universal #OBD2 diagnostic interface works. Performed couple diagnostic procedures like releasing Electronic Parking Brake (EPB) in 2015 VW Golf MK7, diagnostic scan in 2009 Fiat Grande Punto VAN, checked turbocharger live data in 2010 BMW X1 E84. IP508 proves to be a great tool for regular maintenance, service, and repairs in all vehicles.

ℹ️ Device generates diagnostic reports that you can share via e-mail directly from the device.
Firmware and application updates are lifetime free and available over-the-air via WiFi connection.
Android 10 system is not locked out - you can install 3rd party apps and use internet browser for repair tutorials.

💲 $159.00 (discount $119.00 till March 26th)
🛒 amazon.com/XTOOL-IP508-Transmission-Diagnostic-Diagnosis/dp/B0BL7GH4WX

👍 PROS
Supports all brands with their individual protocols
Easy to keep it updated - frequent OTA updates with claimed lifetime free updates
High-freq live data refresh with multigraph views
Works offline
Online support and remote access
Report simple sharing via e-mail
Actually works on battery + charges via OBD and USB
Full android access + 3rd party apps
User guide as PDF included

👎 CONS
Touch display smaller than iPhone 11 - stylus helpful
No hard case / carring bag
USB for charging only / can't share reports with it
No Google services / Play Store / YouTube app
Changing language requires license update on the server side
No dark mode - display very bright

🛠 TECH SPECS
Tablet + OBD2 cable + USB cable + power brick + regional adapters
Android 10, 2GB RAM, Mali CPU, WiFi 2.4GHz, BT5 BLE
Build-in battery, charge from USB or OBD2 port
Rubber grips, USB charging port, power port, power button.
5-inch display, speaker and microphone

0:00 XTOOL IP508 test in VW, Fiat, and BMW
0:30 XTOOL IP508 diagnostic tool unboxing and overview
1:45 welcome screen and updates
2:25 battery charging and setting menu
2:55 special functions: SAS, OIL, EPB, BAT, ABS Bleed, Throttle.
3:15 Brake pad replacement mode in VW Golf MK7
6:20 automatic diagnostic scan in Fiat Grande Punto
9:45 Fault and live data in BMW X1 E84
12:08 Pros: supported brands, updates, reports
15:09 Cons: small screen, no hard case, no USB sharing
17:15 Great deal for detailing studios and independent workshops

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

Kingbolen BM580 battery analyzer & charging tester, pros & cons

mr-fix 2023-02-23 | Quick test of Kingbolen BM580 battery tester - simple tool to analyze vehicle #battery and car charging system. Load #test for power generator, #ripple test to spot electrical system noise disruption, voltage drop at startup test, waveform display, multimeter, cold crank amp measurement - those are the most important diagnostic procedures while checking and fixing battery related issues. Check how BM580 is performing in those tests.

🛒 Amazon USA: amazon.com/dp/B093KHS3GQ
🛒 Amazon DE: https://www.amazon.de/dp/B0B1QBCGHR/

👍 Pros
Multimeter
Ripple test
Color display
Wide range of supported battery standards

👎 Cons
Short cables
Laggy interface
No 24V system support
Unclear guides
Unused potential of LCD

🛠 Tech Specs
6V and 12V battery support;
100 - 2000 CCA;
2 - 220 Ah;
Supported batteries: regular flooded, AGM flat plate, AGM spiral, EFB and GEL;
Supported test standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB;
Functions: Battery Health Test, Cranking Test, Charging Test, Load Test
Raw data: SOH, SOC, CCA value, CCA rating, voltage, resistance;
Languages: English, Spanish, French, German, Italian, Polish, Portuguese, Russian, Japanese, Chinese, Traditional Chinese;

0:00 Kingbolen BM580
0:40 out-of-vehicle battery test
2:15 multimeter
3:15 in-vehicle battery test
4:05 short cables - difficult to work alone
4:35 charging test & ripple test
5:25 Load test
6:20 Startup test
7:55 Waveform display
8:50 Pros and Cons of BM580

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

Audi A8 D4 (4H) MMI system reset restart force reboot

mr-fix 2023-02-22 | How to reset Audi #MMI 3G+ system in Audi A8/S8 D4 (4H) vehicle. #Restart can fix issues with GPS navigation, touch, system freeze. Reboot will take about 1 minute to fully reload all system applications (navigation, radio, parking sensors visualization, bluetooth telephone, media library, radio...). System restart might also be needed after performing coding and adaptation changes.

ℹ️ Look at the Audi Multimedia Interface control panel and press at the same time: control wheel, upper-right button, TONE button. Release and observe the display. When system #reset starts, it should turn dark, close, open about 5 seconds later with the Audi MMI welcome screen. In next seconds all system components will load and system will be ready to use, hopefully with fixed issues.

0:00 Audi A8 D4 (4H)
0:05 Audi MMI 3G+ system
0:25 Navigation reset button combination
0:45 MMI system restart
1:05 System elements reloading

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

VW Golf MK7 (5G) start-stop memory module installation

mr-fix 2023-02-04 | How to install start-stop system #memory module in Volkswagen Golf #MK7 (5G). This plug & play device will remember last state of the system without coding or adaptation changes. If you don't want or you vehicle does not support coding/adaptation method, using this #startStop module is a great alternative. Quick to install, easy to use, cheap to buy.

🛒 Start-Stop memory module: http://ali4cars.com/s/?p=vw-start-stop-memory

📺 OBDeleven method: youtube.com/watch?v=R8fScxoDuUY

0:00 Start-stop memory module
0:48 Center console disassembly
2:36 memory module installation
2:53 Checking if function stays disabled

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

🔝 Top 10 Golf MK7 upgrades 🔥 #Shorts

mr-fix 2023-02-03 | #Compilation of #best deals for VW Golf #MK7 upgrades and accessories.

Top 10 upgrades for VW Golf MK7

mr-fix 2023-02-02 | 10 best #upgrades compilation for VW Golf #MK7. Stylish new look, new features, better functionality, diagnostic tools for modifications, low price and high value, easy installation, #best deals. Links and discount codes below.

1. Flowing indicators - $9.83
Plug&Play dynamic indicators for side mirrors
🛒 http://ali4cars.com/s/?p=vw-dynamic--flowing-led-indicator

2. Skoda OEM washer cap - $2.06
Silicone washer cap that transforms into funnel
🛒 http://ali4cars.com/s/?p=vag-washer-cap-funnel-6v0955485

3. Trunk LED light - $4.49
Bright light upgrade for cargo space
🛒 http://ali4cars.com/s/?p=vag-led-trunk-light

4. Start/Stop memory module - $9.74
Automatically disables engine start/stop function without coding
🛒 http://ali4cars.com/s/?p=vw-start-stop-memory

5. Rear vertical spoilers - $14.55
Golf R and R-Line look for lower trim cars
🛒 Hatchback: http://ali4cars.com/s/?p=vw-golf-mk7-hatchback-side-spoilers
🛒 Estate/Variant: http://ali4cars.com/s/?p=vw-golf-mk7-variant-side-spoilers-black

6. DSG shift knob - $16.38
Aluminum and color finish for transmission stick
🛒 http://ali4cars.com/s/?p=vw-dsg-shift-knob

7. Aluminum pedal covers - $12.08
Sporty look interior upgrade
🛒 http://ali4cars.com/s/?p=MQB-aluminum-pedal-covers

8. USB charger for rear row - $53.54
Two charging ports for passengers in rear seats
🛒 http://ali4cars.com/s/?p=vw-golf-mk7-rear-usb-panel-black

9. CarlinKit 4.0 - $81.18
Wireless CarPlay and AndroidAuto adapter
🛒 carlinkitcarplay.com/products/carlinkit-wireless-adapter-for-factory-carplay
🎟 18% OFF code: MRFIX

10. OBDeleven PRO Pack - $108.93
Diagnostic interface for service, repairs, retrofits, and modifications
🛒 http://mr-fix.info/redirect/obdeleven

ℹ️ Prices were checked when making the video and might change with time. Prices do not include shipping, handling, taxes, and local import fees.

0:00 Top 10 upgrades for VW Golf MK7
0:03 Flowing indicators
0:13 Washer fluid cap with funnel
0:23 Trunk LED light
0:33 Start/Stop memory module
0:43 Rear vertical spoilers
0:53 DSG shift knob
1:03 Aluminum pedal covers
1:13 USB charger for rear row
1:23 CarlinKit 4.0 (wireless CarPlay)
1:33 OBDeleven (diagnostic interface)
1:43 AliExpress links

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

MIB2 USB HUB retrofit (5G0 035 953 D) - part 2

mr-fix 2023-01-27 | Installation of OEM USB HUB in Volkswagen Golf MK7 with MIB2 Discover Media system (MST2 by Technisat). Hits hub features MFI chip which allows it to use not only AndroidAuto and MirrorLink but also CarPlay - without the 5Q0035726E long green USB port. HUB features 3 USB connections, 2 of which are available as media playback sources, and 3rd one is for other accessories like D-Link DUB-E100, any AndroidAuto device, USB storage with maps (if CID lock is removed).

ℹ️ Installation required adding fuse to the cabin fusebox, replacing the 5Q0035726E USB port with standard one, repining HSD (High Speed Data) fakra connector, changing coding and adaptation values of the MIB2 Main Unit (0x5F).

💻 Coding and adaptation
Module 5F → Long Coding → Byte 19 → USB: iPod USB
Module 5F → Adaptation → Interface for External Media → Connection 1 → Active
Module 5F → Adaptation → Interface for External Media → Connection 2 → Active

🛒 OBDeleven: http://mr-fix.info/redirect/obdeleven
🛒 USB cables from AliExpress: https://s.click.aliexpress.com/e/_AFY3Kw

📺 MIB2 USB HUB retrofit part 1: youtu.be/13LcPv175qU
📺 USB port replacement: youtube.com/watch?v=7yTYaxzeXfY
📺 Adding circuit to fusebox: youtu.be/oYKR06io0nM?t=1285

0:00 VW Golf MK7 interior disassembled
0:15 remove front cubby and plastic trims
1:32 HSD fakra connectors
4:42 USB HUB power and trigger connector
5:25 Connecting HUB to MIB
5:43 OBDeleven coding and adaptation
7:05 Check if HUB is working with MIB
7:30 3x USB port available for media, CarPlay, AndroidAuto
8:30 Old 5Q0035726E port not needed
9:11 Testing new USB ports
11:06 Interior assembled, everything works

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

VW Golf MK7 (5G): Lane Assist activation coding

mr-fix 2023-01-06 | Activation of Lane Assist (Heading Control Assistant) in #VW Golf MK7 using OBDeleven #coding. Car equipped with front-facing multifunction camera can be coded with #LaneAssist that will keep the car on your lane when you don't touch steering wheel for couple seconds. This coding procedure will turn on the feature in the camera and steering, also add option to the instrument cluster and adjustment settings on the infotainment screen.

🛒 OBDeleven: http://mr-fix.info/redirect/obdeleven

💻 Coding procedure
Module A5 → Long Coding:
Byte 00, bit 0 (Lane Departure Warning HCA) → installed

Module A5 → Adaptation:
HCA_On_State → Menu
HCA Warning Intersity → Menu
BAP_Personalisierung → disabled
Intervention moment → late (menu)
Personalization lane departure warning at a terminal 15 → Last setting

Module 44 → Security Access → 19249
Module 44 → Long Coding:
Byte 00 → bit 4 (Lane Assist) → installed

Module: 17 → Long Coding:
Byte 04 → bit 6 (Lane Assist) → installed
Byte 11 → bit 1 (Lane Assist information via BAP) → active

Module 5F → Adaptation:
Car Function List BAP Gen2 → LDW HCA 0x19 → activated
Car Function List BAP Gen2 → LDW HCA 0x19 msg bus → databus extended
Car Function Adapts Gen2 → Menu Display Lane Departure Warnign → activated
Car Function Adapts Gen2 → Menu Display Lane Departure Warnign over threshold high → activated

Press and hold volume knob for 10 seconds to reboot the system. Enable Lane Assist feature. Take the car for a test drive.

ℹ️ Some coding addresses will be different in newer modules / firmwares.

ℹ️ This procedure might be the same for other MQB platform cars like Seat Leon 5F, Skoda Octavia 5E, Audi A3 8V. You can also use other diagnostic tools, like VCDS, VCP, CarScanner ELM327.

⚠️ This is not autopilot! Keep your eyes on the road, keep your hands on the steering wheel!

0:00 VW Golf MK7 (5G)
0:15 A5 multifunction camera
0:45 OBDeleven PRO or VCDS for coding activation
1:40 Camera Lane Assist coding and adaptation
3:05 intervention moment - adaptive lane assist
4:00 Steering support Lane Assist coding
4:35 Instrument cluster Lane Assist coding
5:20 Discover Media Lane Assist coding
6:25 Infotainment system restart
6:55 Lane Assist new options
7:20 Lane Assist orange indicator
7:45 Assistant menu in instrument cluster
8:04 Test drive and automatic lane keeping
8:43 Hands on the wheel warnings

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl

Golf MK7 Front View Camera, part 3: wiring through firewall

mr-fix 2023-01-01 | Guiding wires through #firewall in VW Golf #MK7 to connect front view camera from the engine bay to MIB2 unit in the cabin. Finding grommet above drivers footwell, adding ground connection for the camera, guiding #wiring to the front grill, accessing back of the VW Infotainment unit (MIB) in the passengers glovebox.

🚗 This project is made in 2015 Volkswagen Golf MK7 with MIB2 Discover Media infotainment system and retrofitted original RVC High camera. This is not a retrofit project, since this functionality was not available in for VW Golf MK7. Some other MQB vehicles had option of 360 AreaView feature with 4 cameras and 3D view. My project is a custom modification that I'm planning to make in my vehicle. I'm just sharing my progress and hope for your input.

📺 FrontView mod, part1: youtu.be/ypj4om6XKyw
📺 FrontView mod, part2: youtu.be/3wqv4r55pYo

📺 RVC High retrofit, part 1: youtu.be/zpjgeCMmnP4
📺 RVC High retrofit, part 2: youtu.be/oYKR06io0nM
📺 RVC High retrofit, part 3: youtu.be/RKf2JdayPwI

0:00 Front View Camera in VW Golf MK7
0:25 removed the battery
1:00 Firewall grommet - engine bay side
1:35 Firewall grommet - cabin side
2:10 Punching a hole
2:42 Guiding wires through firewall
4:50 Guiding wires from firewall to the front camera
6:57 Engine bay ground connection
7:18 Wiring from firewall to MIB in glovebox

✅ http://mr-fix.info/
✅ Facebook: facebook.com/mrfixpl/
✅ Instagram: instagram.com/mrfixpl/
✅ Patreon: patreon.com/mrfixpl