FixmyroofAll opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This how to video deals with pointing or repointing brickwork often found on brick walls, chimney stacks or lead flashings to roofs.
The method I'm using here I have found to be very good at stopping the ingress of water, particularly when used with any sort of roof flashing as well. Getting mortar right to the back of any chase is often the key for long life, stopping mortar blowing out and preventing water ingress long term.
In the video you see me touch wet mortar with my bare hands, do not do this in case of cement burns. I only do this in the video as I cannot operate a camera with gloved hands. I also show a diamond mortar rake without a safety guard, this is so you can see how the tool works and at no time should you do the same thing.
How to Point a Brickwork Wall or Repoint a ChimneyFixmyroof2015-10-30 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This how to video deals with pointing or repointing brickwork often found on brick walls, chimney stacks or lead flashings to roofs.
The method I'm using here I have found to be very good at stopping the ingress of water, particularly when used with any sort of roof flashing as well. Getting mortar right to the back of any chase is often the key for long life, stopping mortar blowing out and preventing water ingress long term.
In the video you see me touch wet mortar with my bare hands, do not do this in case of cement burns. I only do this in the video as I cannot operate a camera with gloved hands. I also show a diamond mortar rake without a safety guard, this is so you can see how the tool works and at no time should you do the same thing.
I hope this is useful...WARNING WD-40 silicone remover FAILFixmyroof2017-01-20 | All opinions or methods expressed in the video(s) are personal opinion only. Always check current regulations or seek second opinions from other video sources or websites.
This is what happened to me when I chose to use WD40 to remove old bathroom silicone, rather than my usual method of just plain elbow grease and cutting it out. I then normally clean it up with Isopropyl alcohol or PVCu frame cleaner.
Unless you can get 100% of the old WD-40 off of all mating surfaces your run the risk of what happened to me, contamination. This took about two weeks to happen but it slowly spread until a complete re sealing of the bath is now required.Replace a Slate - Hall Hook MethodFixmyroof2016-12-22 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
In this video I will be replace a roof slate and put a new replacement in. I have already covered how to change a slate in a previous video, but this time rather than using the traditional and cheap lead tingle or tag, I will be using a hall hook.
A hall hook is a great way of securing a slate, especially if the replacement slates need to be virtually invisible.
To subscribe click here : youtube.com/user/123fixmyroof?sub_confirmation=1Ebac Powerdri 18L Dehumidifier ReviewFixmyroof2016-11-18 | All opinions or methods expressed in the video(s) are personal opinion only. Always check current regulations or seek second opinions from other video sources or websites.
In this video we review and test the Ebac Powerdri 18L dehumidifier. This is one of their latest super economical compressor based dehumidifiers aimed at the trade, workshop, and garage use.
It was tested in my home environment as usual, and in my metal shed used for storing surplus work gear. This was a tough test because of the low temperatures experienced this time of year in a totally unheated garden shed. The highest was 10C and the lowest 2 or 1C over a 24 hour period.
A up to date list of what I think are some of the best dehumidifiers and how to use them can be found on the website, complete with an affiliate link if you wish to buy one, like the one near the top of the description bar.DIY Flat Roof Repair - Easy Paint on FixFixmyroof2016-11-04 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
In this video we will be taking a look at a flat roof repair that will cover large areas, or the whole roof if you need it to. This repair uses a solvent based bitumen sealant, the advantage being that it's low cost, dries quickly, and is waterproof fast.
For links to the types of materials I used in this project see here : http://www.fixmyroof.co.uk/flat-roof-repair/bitumen-roof-paintEbac 3850e Dehumidifier Review & TestFixmyroof2016-10-21 | All opinions or methods expressed in the video(s) are personal opinion only. Always check current regulations or seek second opinions from other video sources or websites.
In this video we review and test the Ebac 3850e dehumidifier. This is one of their latest super economical compressor based dehumidifiers with smart control from the 3000 series range.
In tests I found this to be very economical at only 180w on maximum speed, which for a 21Litre whole house dehumidifier is very competitive.
A up to date list of what I think are some of the best dehumidifiers and how to use them can be found on the website, complete with an affiliate link if you wish to buy one, like the one near the top of the description bar.Strip a Flat Felt Roof - Replace a flat roofFixmyroof2016-09-09 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
In this video we look at a common and easy way to strip an old flat roof. This small felt roof was to a front porch, before the new roof goes on, of course you have to remove the old felt roof.
Roofers have been stripping flat roofs like this for well over 50 years, and all you need are some basic tools. If this is helpful, please like or share.
Link for the website and common flat roof choices : http://www.fixmyroof.co.uk/videos-and-guides/flat-roof-replacementCure Condensation and Stop Mould - FreeFixmyroof2016-07-08 | All opinions or methods expressed in the video(s) are personal opinion only. Always check current regulations or seek second opinions from other video sources or websites.
This is a much more better and faster paced re-make of my original video on how to stop condensation and cure mould, which has over 1 million views.
It has all the same good practical advice that I give to people who are suffering from damp and mould that I come across in my line of work. And I know from personal feedback that it has helped lots of people, which is great.
This video is a great free starting point to stop mould growing by reducing the condensation that is often seen on windows and window frames. Please like or share to help out.
Youtube Subscribe : youtube.com/user/123fixmyroof?sub_confirmation=1Aluminium Gutter Repair - Stop Leaky GutteringFixmyroof2016-05-29 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This video takes a look at how to repair aluminium guttering to a good standard that should last many years. Often aluminum guttering will start to leak from a joint, corner, or stop end after about 10 years. Especially if holding standing water.
Thumbing more mastic over the stop of the original built up sealant can fail early, as can a simple paint on solution. This aluminum gutter repair has worked well for me over the years, and one tube of gutter sealant and a roll of scrim will repair many, many gutter leaks.
Subscribe here : youtube.com/user/123fixmyroof?sub_confirmation=1Part 6 Mix Fibreglass GRP Resin & Topcoat or ColourFixmyroof2016-03-25 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This video shows how easy it is to mix fibreglass resin and a colour topcoat. The GRP resins used here were for fibreglass roofing but polyester resins are pretty much the same, so if you're using a standard fibreglass resin and a colour like a Flowcoat or Gelcoat it will be the same, but always check the side of your resins for instructions.
Also shown is how to clean your buckets and dispose of old resin rollers and brushes with the minimum of fuss. Best results are achieved if you can pop out the old resin about 30 mins after it has cured in the bucket because the resin is still soft and peels away from the sides easily.
Fibreglass roofing supplier : http://www.fixmyroof.co.uk/grp-fibreglass-roofing-suppliesFibreglass a Van or Truck Floor - GRP Bed LinerFixmyroof2016-03-25 | All opinions or methods expressed in the video(s) are personal opinion only. Always check current regulations or seek second opinions from other video sources or websites.
In this video I'm going to show you how to fibreglass the floor of a van or truck to give a hard wearing and easy to clean custom bed liner, although walls can also be done with minimal fuss.
This is also an ideal alternative to some van and truck bedliner kits, and a custom bedliner can be achieved often at a fraction of the cost. What's more when they wear out or get damaged they are very easy to clean and re-coat, which is impossible with plastic bed liners often used in some vans and pickup trucks.
How to fibreglass a roof : youtu.be/xT9YsGBU0Fk?list=PL691LewelFXOzbDF-g1OVTqPKCzYI_7zfHow to Replace Ridge Tiles - Fit a Dry Hip RidgeFixmyroof2016-02-26 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This video shows the basics of installing a dry ridge system to a hip ridge, instead of a straight top run as in the previous videos. This method can also be used to fit a dry hip ridge to slate roofs, or plain tiled roofs.
If you're looking for a video on how to replace ridges or lay ridge tiles tiles but dont fancy the traditional method of using mortar, or maybe they just keep blowing off, this method without sand and cement may be for you.
Some of the dry ridge kits talked about in the videos are mentioned on the website and are available via affiliate links in case you want to see what I use, or want to buy one.
In this video I review the new Meaco DD8L Zambezi desiccant dehumidifier. This is not just another good dehumidifier, this has been very well thought out. It offers a level of control and features that will satisfy 99.9% of even the most demanding users, but still manages to make it easy to operate for the switch on and forget crowd too.
Apart from many useful features, the On / Off timer and 24 hour on off timer really allows you to make the most out of any energy saving tariff or solar panel setup you may have. This takes the already low 350w power consumption for a desiccant and lets you make further economy gains.
There is also a lot of other truly great features, and rather unusually for me I would recommend reading the brochure for a full list and I will make that available with the manual on my website where you can also buy through the provided affiliate link if you want to.
A up to date list of what I think are some of the best dehumidifiers and how to use them can be found on the website, complete with an affiliate link if you wish to buy one, like the one near the top of the description bar.How to Install a Dry Ridge System - DIY Fit Part 2Fixmyroof2016-01-02 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This video is Part 2 of how to fit a dry ridge system, and it deals with fitting the ridge batten, vented roll, ridge unions, ridge tile clamps and the ridge tiles themselves.
This is the final part and you should have enough knowledge now to tackle your own dry ridge conversion if you fancy moving from the traditional sand and cement mortar bedded ridges, over to a modern dry ridge system.
A link to my favorite kits and accessories is available via the link at the top of the description along with other info like ridge fixing alternatives.
Thanks for watching, please subscribe.Replace or Re-lay Ridge Tiles - Install a Dry Ridge SystemFixmyroof2016-01-02 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This is Part 1 of how to replace or re-lay ridge tiles with a modern dry ridge system, this is great to refurbish or convert from ageing mortar bedded ridge tiles. Particularly handy if you live somewhere exposed and the wind keeps blowing your ridges off.
To be fair like most things in life, there is more than one way to do it, and many dry ridge kits you could potentially use. I've chosen to take a quick look at some of the most common techniques used with good off the shelf kits. This part specifically deals with two common types of roof construction and how to fit the brackets for the ridge batten.
If you're looking for Part 2 of how to lay a dry ridge that can be found here : youtu.be/cGVxkB8HUPs
If you're looking for how to remove ridge tiles that's here : youtu.be/hr9A9A5Sl4o
The link at the top of the page is my page on dry ridge where I link to my current favorite dry ridge kit, alternatives and information.How to Re-lay Ridge Tiles - Remove Ridges Without BreakingFixmyroof2015-12-03 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This is an introduction into how to relay or re-bed roof ridge tiles. The very first job will be removing the old ridges without breaking them, or the roof tiles in the process.
This first video in the series will deal with removing the old cement mortar from ridges and roof so we can either re-lay them onto fresh sand and cement, or convert to a dry ridge system.
To install a dry hip ridge : youtu.be/HCWUhkDT7m8Toyotomi TD Z110 Review Desiccant Dehumidifier & FeaturesFixmyroof2015-11-22 | All opinions or methods expressed in the video(s) are personal opinion only. Always check current regulations or seek second opinions from other video sources or websites.
Condensation season is here again, so here is a quick review of the Toyotomi TD-Z110 desiccant dehumidifier, this is ideal for up to a 5 bedroom house. It's well made, portable and very easy on the eye. In my tests it also had a very powerful high speed mode making it great for drying laundry, or making in roads into condensation or damp problems.
Designed by a British company for the huge and demanding Japanese market, it's now available to buy in the UK. The link to the review and manual is available on my website via the link at the top of the description and you can purchase via an affiliate link if you wish.
If you're interested in how I test them you can read that here : http://goo.gl/UhyAb8
A up to date list of what I think are some of the best dehumidifiers and how to use them can be found on the website, complete with an affiliate link if you wish to buy one, like the one near the top of the description bar.Meaco 20 L Low Energy Economical Dehumidifier ReviewFixmyroof2015-11-06 | All opinions or methods expressed in the video(s) are personal opinion only. Always check current regulations or seek second opinions from other video sources or websites.
This is a quick review of the Meaco low energy 20L dehumidifier. This popular 2 speed dehumidifier is efficient, and has an extremely low power consumption of only 255 watts, making it very economical and cheap to run. Probably one of the cheapest to run that I've seen for up to a 5 bedroom house that actually works well. Just keep in mind this is a compressor based dehumidifier, so if you are thinking of using it in unheated or cool locations, you may be better of with a desiccant type dehumidifier instead, and those are explained on the website in the link below.
An up to date list of great dehumidifiers and the user manual for this particular dehumidifier can be seen via the link at the top of the description where you can also find affiliate links if you wish to purchase.
If you're interested in how I test them you can read that here : http://goo.gl/UhyAb8
The video for the smaller 12L version for up to 3 bedroom homes can be found here : youtu.be/DyhAMJSHxyE
A up to date list of what I think are some of the best dehumidifiers and how to use them can be found on the website, complete with an affiliate link if you wish to buy one, like the one near the top of the description bar.Meaco Low Energy 12L Review - Economical low power dehumidifierFixmyroof2015-10-04 | All opinions or methods expressed in the video(s) are personal opinion only. Always check current regulations or seek second opinions from other video sources or websites.
This is just a quick review of the Meaco low energy 12L dehumidifier. This small popular dehumidifier is efficient, and has an extremely low power consumption of only 165 watts, making it very economical and cheap to run. Probably the cheapest to run that I've seen, that actually works well. Just keep in mind this is a compressor based dehumidifier, so if you are thinking of using it in unheated or cool locations, you may be better of with a desiccant type dehumidifier instead, and those are explained on the website in the link below.
An up to date list of great dehumidifiers and the user manual for this particular dehumidifier can be seen via the link at the top of the description where you can also find affiliate links if you wish to purchase.
If you're interested in how I test them you can read that here : http://goo.gl/UhyAb8
If you want to see the bigger 2 speed 20L version I have a video here : youtu.be/EfxReE0sk-E
A up to date list of what I think are some of the best dehumidifiers and how to use them can be found on the website, complete with an affiliate link if you wish to buy one, like the one near the top of the description bar.Toyotomi TD Z80 Review Desiccant Dehumidifier & FeaturesFixmyroof2015-10-04 | All opinions or methods expressed in the video(s) are personal opinion only. Always check current regulations or seek second opinions from other video sources or websites.
Condensation season has started again, so here is a quick review of the Toyotomi TD-Z80 small desiccant dehumidifier. It's small, lightweight, portable and very easy on the eye. In my tests it was also quieter than most dehumidifiers I've come across, despite its on paper rating of 44dB.
Designed by a British company for the huge and demanding Japanese market, it's now available to buy in the UK. The link to the review and manual is available on my website linked to at the top of the description here and you can purchase via an affiliate link if you wish.
If you're interested in how I test them you can read that here : http://goo.gl/UhyAb8
Hope this helps...Roof Ventilation Lap Vents Simple DIY Loft VentsFixmyroof2015-08-21 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
If you're interested in lap vents or fitting other types of roof ventilation like roof tile vents please visit the website here : http://www.fixmyroof.co.uk/roof-vents
This video shows what is probably the fastest and cheapest way to DIY ventilate damp or hot roof spaces like an attic... Lap vents.
Lap vents are suitable for any roof with bitumen based under felts or modern breather membranes. Even new roofs fitted with breathable membranes can suffer from a build up of condensation or trapped heat under the right conditions. Often the extra ventilation offered by 10 - 20 of these simple low profile lap ventilation units can solve most problems.
For those who have condensation problems in the home please wee my webpage for advice and a video : youtu.be/TP7D-t5wfZc
Some of the items talked about in the videos and mentioned on the website are available from affiliate links in case you wish to purchase.Roof Vents & Loft Ventilation Techniques - Why Vent an AtticFixmyroof2015-08-21 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This is my video on how to cure condensation and mould in the home : youtu.be/TP7D-t5wfZc
This video takes a look at the basics of roof ventilation and what it actually does. This can be ice dam prevention, keeping your attic cool, or curing damp and mould in the roof space.
There are various different way to ventilate an attic or loft space but the basic concept is the same, a gentle circulation of air to keep your house cool in the summer and free from damp, mould, and condensation in the winter.
In this video you will also see why older houses without ventilation benefit from ventilation, and why... even though they may not have been built with any form of roof ventilation and been fine for years.
If you have mould in the attic, condensation, damp, or a hot attic in summer it could be a sign you need roof ventilation.
Some of the items talked about in the videos and mentioned on the website are available from affiliate links in case you wish to purchase.How to Felt a Shed Roof - Fit long life Roofing FeltFixmyroof2015-07-08 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
In this video ( how to felt a shed part 2 ) we will be looking at how to fit felt to a shed roof, and just like clothes maketh the man, felt maketh the shed. Here we will be installing a high performance roofing felt to the freshly stripped shed roof from Part 1, and this sort of roof should give you a comfortable 20 Years of life, it could be a lot more.
The roofing materials used in this project are exactly like the ones I use and can be found in detail on the website or purchased through an affiliate link for those who want to.
You can also use this with a log cabin - summer house or gazebo
I hope this proves useful.How to Felt a Shed Roof - Part 1 Strip Roof Felt & PrepFixmyroof2015-07-08 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This is part 1 of how to felt a shed roof and it deals with how to strip old roofing felt from nailed felt roofs, heat bonded, and glued shed roofs with a garden spade. We will also take a quick look at removing any wooden trims without damage to them.
Part 2 is how to fit high performance felt to the roof once the prep is complete and that can be found here : youtu.be/WBq8o6_O-u8
The roofing materials used in this project are exactly like the ones I use and can be found in detail on the website or purchased through an affiliate link for those who want to.
I hope this proves useful.Roof Ventilation Smoke Bomb Test in AtticFixmyroof2015-05-24 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
A super short video on what sort of ventilation you can expect from adding a roof tile vent or two in your loft, or attic space.
Here I set off a small smoke bomb inside a loft in a low level roof without strong winds to show how the air circulates under normal conditions.
A video of the installation of roof tile vents can be seen here : youtu.be/cJ3Y-VXQon0 if you need it.
For website support for all things roof ventilation related see the very top link, it also has some affiliate links incase you want to buy any vents.
Hope it helps...Roof Ventilation Tile & Bathroom Exhaust Vent ExtractorFixmyroof2015-05-24 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This video shows how easy it is these days to install and fit roof ventilation with dedicated roof tile vents as a direct swap.
In this video I'm fitting a low profile roof tile vent with a bathroom extractor fan pipe connected as well. If you are looking for a simple way to connect a bathroom exhaust fan to ventilate outside without having to cut holes in your wall, fascias or soffits this could be a simple solution for you.
Obviously you can simply leave the adapter and hose off for standard loft or attic ventilation. And if you want to see a smoke test of roofing vents in action see this video :youtu.be/3ZKRg4yETq4
The link at the top will take you to my website support page that deals with all sorts of ventilation that will help if you any sort of loft condensation or damp problems in the attic, and there are some affiliate links too in case you want to buy.
Hope it helps.Flat Roof Leak Repair - Paint on Liquid Waterproof SealantFixmyroof2015-04-17 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
Even roofers get a leak sometimes. After the last 48 hour downpour here in the UK I got a leak in my felt flat roof, it's a Job that has been scheduled for last year that I never quite got round to.
In this video you can see me using a very common liquid waterproofer used in the trade for various small repairs just like sealing this felt roof. It seals to most surfaces with no adverse reaction and is ideal for no flame roof repairs, especially when reinforced over small splits or cracks.
Relatively cheap to buy in some roofing yards, but often overpriced in builders merchants, the link above will take you to my webpage dedicated to various types of flat roof repair, and there is an affiliate link to some Acrylic waterproofer at the best price I could find if you want some.
Hope it helps.Remove a Chimney SafelyFixmyroof2015-03-11 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This is a short video to point out just some of the aspects of safety when working with chimney stacks, but in no way replaces the health and safety measures you will be already following yourself.
The purpose is to remind and reinforce the very real dangers of working on and with chimneys.
Tips to find a professional :http://www.fixmyroof.co.uk/trusted-roofing-companyRemoving a Chimney Below Roof Level - How toFixmyroof2015-03-11 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This video shows the chimney removal of a small single skin chimney stack below roof level, and then tiled over to make good. The method shown is a slow, deliberate technique for chimney demolition that is often used in chimney reduction on flues that are no longer in use.
Working with chimneys is dangerous, if you are considering taking a chimney yourself or doing any structural work with a chimney stack please watch my safety video here : http://youtu.be/tzXlMmnoz58
Use this as an ADDITION to the health and safety measures you will already have in place!
If you think you might be out of your depth please get professional help. : http://www.fixmyroof.co.uk/trusted-roofing-companyChimney Cowl Fitting DIY all PurposeFixmyroof2015-01-30 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
In this video we take a look at how to fit an all purpose chimney cowl like the common multi function, multi fuel chimney cowl similar to the Colt series or the M.A.D. cowls.
To see lots of differentHow to Join a Roof - Install and Fit a Bonding GutterFixmyroof2014-12-20 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This video shows different methods of how to install a bonding gutter, also known as a secret valley or secret gutter. You can use this method to fit either a dry fix bonding gutter or the traditional bonding gutters with or without mortar.
How to put holes in slate : http://youtu.be/_LweBf4vwE8How to Join a Roof Install an Abutment Soaker / Secret GutterFixmyroof2014-12-19 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
In this video I will be installing an abutment soaker also known commonly as an abutment gutter, or secret gutter. This is a slightly unusual example as it shows the fitting of the abutment gutter into a concrete profiled tile roof rather than the usual flat profiled tiles. But I think it's a good example to show, as you can see easily how to adapt this for most roof needs or chimney details as well.
If you want to buy some good quality low cost lead bossing tools they can be found via the affiliate links available on my website here : http://www.fixmyroof.co.uk/tools-and-miscLeaking roof join ? - The Abutment Gutter & why its missingFixmyroof2014-12-19 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This video describes what an abutment soaker or secret gutter is, what the abutment soaker does, and why they are often missing from roofs, not only on new builds, but on private properties that have been re-roofed.
Website support for roof Flashings and Soakers : http://www.fixmyroof.co.uk/install-roof-flashings/step-flashingEcoAir Dehumidifier Review & Features dd12fwFixmyroof2014-11-07 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
In this Video I run through the feature set and functions of the EcoAir dd122fw MK5 as fast and thoroughly as I can. Hopefully this will give people some idea of the features available on dehumidifiers in general, especially the newer desiccant varieties which suit colder climates.
A big thank you to the Landlord who loaned me this brand new unit for testing...
If you're looking for the best dehumidifier, this is certainly one to consider in its size and capacity.
An up to date list of dehumidifiers and the user manual for this particular dehumidifier can be seen via the link at the top of the description complete with affiliate links in case you wish to buy like the one at near the top of the description.
Hope this helps...Test of a Desiccant Dehumidifier EcoAir ddw122fwFixmyroof2014-11-07 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
Please see the first part of this series which shows nearly every feature, and recorded noise levels : http://youtu.be/lBKPudHQIuA
This is a real world test of the EcoAir ddw122fw MK5 desiccant dehumidifier. I have been asked a lot of questions about dehumidifiers, especially desiccant versions, so hopefully this set of two videos will answer most of those questions as to how they work and what you can expect.
A up to date list of what I think are some of the best dehumidifiers and how to use them can be found via the link at the top of the description complete with affiliate links if needed.
Hope this helps...Cleaning a cement mortar mixing spotFixmyroof2014-10-08 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
Just a quick video on how to clean old mortar from a builders spot with minimal fuss and mess. You can have a builders spot like one of these plastic versions last many years if you look after it when you've done working with it.
For addition help with mortar mixes : http://www.fixmyroof.co.uk/mix-cement-mortarHow to Mix small amount of Sand Cement Mortar by handFixmyroof2014-10-08 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
Mixing a small sand and cement bucket mix like this by hand is not only fast, but very cheap for small DIY jobs around the house. A lot of repair jobs even for professionals involve 'knocking up' small amounts of mortar like this. This is I believe an essential life skill, like knowing how to wire a plug, or unblock a sink.
Great for small pointing jobs, pointing lead flashings, brickwork chases, walls and chimney to name but a few...
To learn how to point up a wall, slabs or chimney se this video : youtu.be/jPcp0iLoJtMHow to Mix Sand and Cement Mortar By Hand Like a ProFixmyroof2014-10-08 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
Mixing sand and cement by hand like this is a great way to make enough mortar for DIY projects. Mixing mortar with a builders spot like this is fantastic because it allows you to keep sand and cement mixes smaller, therefor fresher and better.
The only trouble with 'knocking up' any sort of spot mix or wheel barrow mix, has been taking care of your back. Here I give my technique for a spot mix that I don't find back intensive.
You can use this basic method for mixing all sorts of common sand and cement mixes or concrete for jobs like...
Pointing slabs, chimneys, ridge tiles, walls... Brick laying, block laying... Mixing concrete, post mix, concrete worktops...How to Replace broken common Interlocking Roof TilesFixmyroof2014-08-15 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
In this video we take a closer look at replacing common interlocking concrete or clay roofing tiles. If you have a broken roof tile this video will show you the best way to change a roof tile even if every tile is nailed with the minimum fuss and accidental breakages.
Hope it helpsHow to Replace small Plain Roof Tiles EasyFixmyroof2014-08-15 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
In this video we will look at how to replace these small plain tiles even in a situation where every row is nailed. I will show you how to use the flat pry bar effectively to reduce breakages when replacing or changing broken tiles.
Hope it helps.How to Replace hanging Roof Tiles or hanging SlatesFixmyroof2014-08-15 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This video shows how to replace hanging tiles or hanging slates. Sometimes you may have one or two broken hanging tiles and they can be quite awkward. If your not careful you can actually make matters worse by breaking more than you fix, in this video I will try to show you various methods to safely replace a broken tile or slate.
This should be useful if you have broken or cracked tiles or slates around a bay window for instance. Hope it helps.Part 5 Fibreglass RoofingTopcoat - GRP Flat roof colourFixmyroof2014-05-14 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This video which is part 5 of 5 deals with applying the top coat or colour to your new fibreglass roof project. Always try to topcoat the roof within the first 24 hours, but preferably the same day as the main roof laminate.
For the video on how to create lead roof flashings to go with this roof look here : http://www.fixmyroof.co.uk/install-roof-flashingsPart 4 Fibreglass Roof Laminate - Laying a GRP roofFixmyroof2014-05-14 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This which is Part 4 of 5 deals with the laying and laminating of the main roof deck. Here we apply roofing resin to the OSB3, laminate and consolidate the laminate to form the main fibreglass roof covering.
For help with resins and catalysts see this link : http://www.fixmyroof.co.uk/videos-and-guides/flat-roof-replacement/how-to-fibreglass-a-roof/mixing-resin-and-topcoatPart 3 Fibreglass Roof Bandages - Laminate Trims & JoinsFixmyroof2014-05-14 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This video is part 3 of 5 and deals with your first laminating experience when installing a new fibreglass roof. GRP roof trims will need to be bandaged at the perimeter where they meet the roof decking. I also show you how to fibreglass any open ends in the trims and strengthen mitre joints.
For more information on mixing resins and catalysts see this link : http://www.fixmyroof.co.uk/videos-and-guides/flat-roof-replacement/how-to-fibreglass-a-roof/mixing-resin-and-topcoatPart 1 How to Install a Fibreglass Roof - GRP timber deckingFixmyroof2014-05-14 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This is video 1 of 5 on how to install a GRP fibreglass flat roof from start to finish. This video deals with the basic construction of the timber decking, common choices and how and where you can fit battens to support the GRP trims in the next video.
For more information and sizes of the fibreglass trims look here : http://www.fixmyroof.co.uk/videos-and-guides/flat-roof-replacement/how-to-fibreglass-a-roof/fiberglass-roof-trimsPart 2 Fibreglass Roof Trims - Cut and Fit GRP EdgesFixmyroof2014-05-14 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This video which is Part 2 of 5 deals with GRP roof trims including cutting, fitting, joining as well as overlapping and ladder access points should you need one.
For a full range of available fibreglass roof trims and sizes look here : http://www.fixmyroof.co.uk/videos-and-guides/flat-roof-replacement/how-to-fibreglass-a-roof/fiberglass-roof-trimsChimney flues and chimney pots - Smoke Test and IdentifyingFixmyroof2014-04-12 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This videos deals with the basic issues in understanding and identifying which chimney pot is connected to which flue, and then in turn to a particular fireplace. Once you know the basics of construction it removes a little bit of the mystery, so even if your chimney flues are not exactly the same it may help.
Always test with a good smoke bomb or pellet to confirm or crush your theory, that's shown too.
I then show you how to measure a chimney pot from the floor so you can work out the internal size and the outside diameter, very handy for fitting chimney cowls or chimney caps.
Remember, blocking off the wrong flue could be very dangerous, if in any doubt call in a professional !!!
Chimney cap video here : http://youtu.be/Ge3SoeBOPOIChimney Capping - How to Cap off a Chimney and SealFixmyroof2014-04-12 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
In this video I show 3 different ways to cap off a disused chimney that does not alter the structure of the chimney stack. This way any future change of mind and no money has to be spent fitting new chimney pots or altering brickwork.
If your thinking of chimney capping you will see two off the shelf solutions that can be purchased at a good roofing yard or online via the website link.
The third method is a very old fashioned way to seal a chimney with lead, this really should be a temporary solution only, but it will seal a chimney waterproof and airtight.
Remember capping off the wrong chimney can be very dangerous, if you are in any doubt call in a professional!!!
Chimney safety video here : http://youtu.be/tzXlMmnoz58How to Install a soil PIPE FLASHING - Fit a Lead SlateFixmyroof2014-03-01 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
This video shows you how to install a soil pipe flashing or vent pipe through a roof to profiled roof tiles otherwise known as a lead slate. It's very simple to fit yourself as long as you remember to support any overhanging lead at the rear of the flashing as shown in the video.How to Install Step and Cover Flashing - For Roof Tiles and Chimney FlashingsFixmyroof2014-02-14 | All opinions or methods expressed in the video(s) are personal opinion only and for educational purposes only. Always check current regulations or seek second opinions from other video sources or websites. Anyone working at ANY height should be fully trained and insured to do so and use the correct access equipment. Anyone working on ANY project does so at their own risk!
Step and cover flashings
Lots more helpful info on lead roof flashings here :
This video show how to make step cover flashings, these are used on profiled roof tiles, conservatory flashings and single overlap interlocking roof tiles. This type of step flashing incorporates both the step and the cover.
If you want to buy some good quality low cost lead bossing tools they can be found via the affiliate links available on my website here : http://www.fixmyroof.co.uk/tools-and-misc