Awesome DIY Leveling Feet and updates (Random Shop Stuff 19) Marius Hornberger 2026-09-19 | Awesome DIY Leveling Feet and updates (Random Shop Stuff 19)
I Built a Robot That Can Make me Rich Marius Hornberger 2023-10-13 | Ever since I built my flattening jig and upgraded it with the gear rack, I knew that, eventually, I would automate it. The concept for that is also pretty simple. However, the execution provided a good amount of challenges. And that's what this video is about.Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger Use the exclusive code "YTB930". Buy FlexiSpot E7 now for the best price!You will get $30 off of an $500 order.US: bit.ly/3tHS6Ti CA: bit.ly/3rIASVCCheck out these videos:Original Flattening Jig: youtu.be/ssndGQxs8ZMDining Table Build: youtu.be/dzq0HGtOXnkyoutu.be/hV5B2A8lAZUUpgrading the Jig & Bed Build: youtu.be/r-S5HSzxrEIShop Computer Arm: youtu.be/p68Y1e4acF4 Enjoy the video!I Built a Robot That Can Make me Rich: youtu.be/7GUkrfnmVRk
Homemade Edge Clamps | Live Reaction with Matthias Wandel Marius Hornberger 2023-09-17 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger Enjoy the video!
Was it Worth Building These? | ft. Matthias Wandel Marius Hornberger 2023-09-09 | Building edge clamps started as a simple idea and escalated into a huge project with two collaborations!Check out Matthias Wandel's video: youtu.be/GgYXvgqaVuoand his channel: @Matthiaswandel Also, check out these channels:CNC Kitchen: @CNCKitchen Thespringguy: @thespringguy1 This Old Tony: @ThisOldTony Did you like the video?Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger▬ Teilnahmebedingungen ▬▬▬▬▬▬▬▬▬▬▬▬Veranstalter des Gewinnspiels ist:mariushornberger.com/de/policies/legal-noticeTeilnehmen kann jeder, der diesem Video einen Kommentar mit dem Ihnalt "I want the clamps" schreibt.Nicht teilnahmeberechtigt an dem Gewinnspiel sind Personen, die zum Zeitpunkt ihrer Teilnahme jünger als 14 Jahre sind.Das Gewinnspiel beginnt am 9.9.2023 um 14:00 Uhr (CEST) und endet am 17.09.2023 um 20:00 Uhr (CEST).Der Gewinner wird per Zufall ermittelt und erhält eine Antwort auf den "I want the clamps" Kommentar von Marius Hornberger (verifizierter Kanal mit Haken). Falls sich der Gewinner nach einem Tag nicht zurückgemeldet hat um den Gewinn entgegenzunehmen, wird ein neuer Gewinner per Zufall ermittelt.Verlost werden 5 der selbstgebauten, im Video gezeigten Kantenzwingen.Das Gewinnspiel steht nicht in Verbindung zu YouTube. YouTube ist insbesondere nicht Veranstalter, Sponsor, Unterstützer oder Organisator dieses Gewinnspiels. Informationen werden ausschließlich durch den Veranstalter und nicht durch YouTube bereitgestellt. Mit der Teilnahme am Gewinnspiel erklärt der Teilnehmer, dass er gegenüber YouTube keine Ansprüche geltend machen wird, die im Zusammenhang mit dem Gewinnspiel stehen und er YouTube insoweit freistellt.▬ conditions of participation▬▬▬▬▬▬▬▬▬▬▬▬ Organizer of the giveaway is: mariushornberger.com/de/policies/legal-noticeEverybody can enter by leaving a comment to this video with the content "I want the clamps"Excluded are people under the age of 14.The giveaway starts on September 9th 2023 at 2pm (CEST) and ends on September 17th 2023 at 8pm (CEST).The winner will be picked at random and will receive an answer to the "I want the clamps comment" from Marius Hornberger (a verified channel). If the winner doesn't respond after one day, a new winner will be picked at random.The giveaway is 5 of the homemade edge clamps shown in this video.The competition is not connected to YouTube. In particular, YouTube is not the organizer, sponsor, or supporter of this competition. Information is provided solely by the organizer and not by YouTube. By participating in the competition, the participant declares that he will not assert any claims against YouTube in connection with the competition and that he will indemnify YouTube in this respect.▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬Was it Worth Building These? | ft. Matthias Wandel youtu.be/OhwSUWqCCso Enjoy the video!
Making Custom Storage Improvements & Giveaway Marius Hornberger 2023-06-23 | Get your OpenSauce tickets here: https://opensauce.live/Show your creations at the event: https://opensauce.live/exhibit-application/Want to know more about the Pantorouter: pantorouter.comMy apartment was in big need of some storage improvements for food and similar. I have a tiny room that was pure chaos and an apothecary cabinet that never was built to its full potential. I fixed both problems in this video and hope you can get some ideas from it.Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger Chapters:00:00 Assembly1:55 What the Pantorouter does3:08 Doing something useful7:46 The second improvement14:41 Giveaway informationMaking Custom Storage Improvements & Giveaway: youtu.be/fZPxvFvwuIw Enjoy the video!
Camera Gantry System Marius Hornberger 2023-04-28 | Having used a tripod for 8 years now, an upgrade was inevitable. But a ceiling-mounted camera gantry is something you cannot buy, so you have to build it yourself. It was an enjoyable project with many machined parts, giving me plenty of practice in achieving close tolerance fits.And, of course, I got some inspiration from other creators doing a similar build.Check out the videos of these guys:@PhilVandelay youtu.be/sRkdNH5fxRE@InheritanceMachining youtu.be/t1sXvMY_vAwSupport me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger*The cheap linear rails I used: amzn.to/3Hr9sYQ Enjoy the video!Camera Gantry System: youtu.be/7V0NvNZmvXUAlle Links mit "*" sind Amazon Affiliate Links. Marius Hornberger ist Partner am Amazon Affiliate Partner Programm
Worlds Best Drill Press Upgrades Marius Hornberger 2023-02-24 | After restoring my grandpa's drill press, I wanted to give it some upgrade that would make it truly unique and incredibly a lot more capable.See the previous video here: youtu.be/hhrYrKy-BGsSupport me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger Links to the products I used:*2 position dip switches: amzn.to/3XTZxjL*3 position dip switches: amzn.to/3xPvdMJ*Goose neck: amzn.to/3XYqFOE*3 position dip switches (momentary): amzn.to/3ZgIWrr*Throttle valve block: amzn.to/3YZHCtg*Cam lever clamp: amzn.to/3IT0YKY*Sensor cable: amzn.to/3xPqcUl*Pneumatic hose: amzn.to/3EvtMqz*Electrical box: amzn.to/3koD4h8*Pneumatic L-fittings: amzn.to/3SzBXb5*Pneumatic fittings: amzn.to/3INUaxl*Telescopic gauges: amzn.to/3kr067a*24v LED work light: amzn.to/3KzYiTO*Mist cooling set: amzn.to/3Y2ZzWC*DRO kit: amzn.to/3m5TYBw*Limit switches: amzn.to/3lYuqX3*Mist cooling oil: amzn.to/3xLUQhz*Tiny pressure regulator: amzn.to/41qv6EK*Worm gear motor: amzn.to/3m1Wl8A*Pneumatic manifold: amzn.to/3IOQooy*Shaft coupling: amzn.to/3xQK0Xy*24v power supply: amzn.to/3StMLY4*Motor speed controller: amzn.to/3ZlK1P1*Magnet chuck: amzn.to/3ZlgRiM*Grinding stones: amzn.to/3L0WTGqChapters:0:00 What's in this video?0:14 Motorized Table4:28 Auto Table clamp13:14 DRO18:15 Work Light18:57 Compressed Air20:17 Mist Cooling20:58 Cable Nightmare21:30 Features so far22:30 Shield24:21 A good fail25:38 T-Slot cover27:07 Magnetic Vise28:54 Too bad it's over Enjoy the video!Worlds Best Drill Press UpgradesAlle Links mit "*" sind Amazon Affiliate Links. Marius Hornberger ist Partner am Amazon Affiliate Partner Programm
Making a Threading Die Holder (Free Plans) Marius Hornberger 2023-02-03 | Making a threading die holder for the lathe tailstock. A solid 3D-printed handle and swappable steel threading die holders for individual sizes. They can also be used as regular die holders without the tailstock handle. Everything got a nice storage box with a wooden hinge and 3D-printed inserts.Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger You can get all the files mentioned here:My Shop: mariushornberger.com/products/tailstock-threading-die-holder-filesPrintables: printables.com/model/387747-threading-die-holders-for-lathe-tailstockTap and die sets I used for this project:*Tapping set: amzn.to/40CvShQ*Threading die set: amzn.to/3wPwPFQ Enjoy the video!Alle Links mit "*" sind Amazon Affiliate Links. Marius Hornberger ist Partner am Amazon Affiliate Partner Programm
Corner vise mount Marius Hornberger 2023-01-31 | Unnecessarily complicated but 100% worth it. Also a good CAD and 3D carving practice.#short
Inside a Drill Press Marius Hornberger 2022-12-23 | Restoring and upgrading the drill press from my grandpa was a fun project exactly to my liking. The variable speed is incredibly useful, and I can finally run all tools at the right rpm. The VFD is a Sourcetronic ST 500 400v 1,5kW for the 1kW motor. It's not sponsored, and I paid about 260€ for it. You can get much cheaper ones, but I had a bad experience with one of them and decided that investing a bit more into a quality one made in Germany is a good idea. I have no regrets.Same with bearings and belt, which I got for 60€ total. I used cheap bearings for different projects, and they broke way too early. This nice drill press deserves nice hardware, so I went with SKF bearings.Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger *Analog rpm meter: amzn.to/3Wt0FLA*Hall-effect sensor: amzn.to/3veK3v1 Alle Links mit "*" sind Amazon Affiliate Links. Marius Hornberger ist Partner am Amazon Affiliate Partner ProgrammEnjoy the video!How To Properly Restore a Drill Press
Homemade 10,000€ Bed || 4 Unique Features Marius Hornberger 2022-11-04 | Since I moved into an apartment in February 2022, I didn't have a proper bed. So it was time to build one. Me being me, it couldn't just be any bed, but one made to outlast me and have unique features that you find nowhere else.'Link to the live stream: patreon.com/posts/more-about-bed-74145531Links to Fraiser router bits used in this video':- German: bit.ly/3foILsW- English: bit.ly/3U2SXX9Don't forget my coupon code to save 10%: MARIUS10Other links to products used in this video*:- Touch dimming switch: amzn.to/3Ww7n3U- LED strips: amzn.to/3h9yPnO- gas shocks: amzn.to/3FD2C2k- LED power supply: amzn.to/3DWwwx7- Oil finish: amzn.to/3NtXbom- Face mask: amzn.to/3U3XIj8- Router for flattening: amzn.to/3UoI5CyThis is the product I used for the gravel inlay: https://www.ravello.de/'Interested in a PantoRouter? pantorouter.comSupport me here: patreon.com/mariushornberger?ty=hor support me through my Amazon wishlist: amzn.to/2QoQbhwFollow me on Instagram: instagram.com/marius.hornbergerChapters:00:00 Intro01:01 Material & Jig preparation03:11 Footboard & sides07:04 Headboard12:11 Structural frame17:36 Assembly21:17 Nightstands23:07 Light panels29:20 Custom cushions30:51 Gravel inlay33:14 Hidden drawers37:11 FinishingAlle Links mit "'" sind Werbe-LinksAlle Links mit "*" sind Amazon Affiliate Links. Marius Hornberger ist Partner am Amazon Affiliate Partner ProgrammEnjoy the video!Homemade 10,000€ Bed || 4 Unique Features
Homemade PC Arm with Special Features Marius Hornberger 2022-07-08 | I use my shop computer for drawing and to control my CNC router. So far, it had no good place and was sitting on "temporary" desks. I wanted a better solution and built this height-adjustable arm to mount it. Controlling the CNC at standing height is finally comfortable now.If you're interested in the rough plans, check them out here:mariushornberger.comWant to support me in another way? Check out these links:Patreon: patreon.com/mariushornberger?ty=h Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger Enjoy the video!Homemade PC Arm with Special Features
CNC Spoilboard v2 Marius Hornberger 2022-06-24 | After my automatic tool changer upgrade for the CNC router, I needed a new spoilboard, because the current one is too long. Instead of just cutting it shorter I wanted to make a better one with new features that also fixes some problems I had before. The result is my CNC spoilboard v2.Want to help out? patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornbergerInterested in the bits I used for this project?Check this affiliate link: bit.ly/3yfPSe4 chapters: 0:00 - 2:42 BlaBla2:42 - 5:12 Preparing new parts5:12 - 6:51 Genius alignment method6:51 - 9:03 Finishing9:03 - 10:03 More BlaBla Enjoy the video!
My Best Project...Until Now Marius Hornberger 2022-06-10 | An automatic tool changer for my CNC router was on my "I want it" list for over a year. Now it's done, and I love it!I assume the question will come up where I got the tool changer. I bought it from Stepcraft.comMy Best Project...Until NowEnjoy the video!Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornbergerVideo linksSpoilboard v2: soonOperator console: soonAutomatic dust shoe: youtu.be/IF8U8nd5oSMMy online shop: mariushornberger.comAffiliate links for router bits:English link: bit.ly/3QoRd9tGerman link: bit.ly/3xB5et4 Impressum (Legal notice): mariushornberger.com/de/policies/legal-notice
You Will Love These Casters | Tool Base Build Marius Hornberger 2022-03-04 | I needed a sturdy, but movable base for my desktop CNC router, so I built one.Get the plans here: mariushornberger.com/products/powertool-baseInterested in the casters?German Affiliate Link: amzn.to/3pIbUBbSupport me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger Enjoy the video!
I Over-Engineered a Kitchen Cabinet with Special Features Marius Hornberger 2022-02-18 | I recently moved into a new apartment. So that's a perfect opportunity to over-engineer a kitchen cabinet. This build video shows you the process I went through building this.Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornbergerLink to 3D-print files here:thingiverse.com/mariushornberger/designsLink to the drawer assembly instructions:blum.com/de/de/produkte/fuehrungssysteme/movento/downloads-videos Enjoy the video!
When a Fail becomes a Feature | Workbench Build Marius Hornberger 2022-02-13 | I'm building a workbench that can be disassembled into smaller pieces, making it easy to take with you when moving. Setting it up again only takes 15 minutes to start the new workshop as soon as possible. You don't need many tools to build it, and I have plans available with written instructions that walk you through the whole build. The plans also come with a configurator, which means you can specify the workbench dimensions exactly to your needs.Get the plans here: mariushornberger.com/de/products/disassemblable-workbench-plansVideo Links mentioned:- Router jig: youtu.be/2IMDZ2vs8NM- Router jig update: youtu.be/Zznwe6y2asgLink to the 3D-printed router table dust collection:thingiverse.com/thing:5236663/filesSupport me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger Enjoy the video!
Floating Shelf | Easy DIY mounting Marius Hornberger 2021-12-18 | My parents asked me to build them a floating shelf under their TV for a soundbar. It should be one with a live edge and no visible fasteners. Since it hangs relatively low on the wall, I had a clever idea for a cheap and simple DIY solution. Bosch also has a sponsored part in this video because they sent me some sanding meshes of their new Expert line along with a battery-powered random orbit sander to test them with. I did some tests to see if the dust collection is as good as advertised.Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger Link to the sanding meshes' | bit.ly/3BgPdHeLink to the Bosch YouTube channel' | youtube.com/user/BoschProfessionalDE#BOSCHPROFESSIONAL #BOSCHEXPERTAlle Links mit "'" sind Werbe-Links Enjoy the video!
Saying Goodbye to my First Homemade Machine + Updates (Random Shop Stuff 27) Marius Hornberger 2021-11-19 | Since I'm moving soon, my sister is moving now, and friends will also move soon, there is less shop time left. At the same time, I'm entirely reorganizing the second room of the workshop, creating a much more open space.This is not interesting for a video, but here's an update on all the progress. In addition, I have quite a few projects in mind, which I'm presenting as well. I think restoring the two old machines I got from my grandpa will be interesting. Looking at well-built machines that are over 50 years old is fascinating to me.On the other hand, it's also fascinating to do projects with today's "high-tech" like the automatic tool changer for the CNC router. I'm able to afford the components because of your support. Thank you, everybody!Let me know what project sounds the most interesting to you, and enjoy the video.Do you want to support me and are interested in more content?Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger0:00 Intro0:27 Updates9:58 Unbuilding
Homemade Sliding Door Lock | Unpickable Marius Hornberger 2021-10-22 | Ever since I made my sliding shop door, I was annoyed by the "locking" mechanism that came with the rail kit. I wanted to fix that with a custom door handle years ago. A SketchUp file with a design existed for about four years already, but I never built it.Now it's done, and oh boy, do I like it. I hope you enjoy the video as much I enjoyed editing the filing scenes ;)Wanna help out?Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger Enjoy the video!
Inside a Sliding Table Saw + Long-Term Review + Upgrades Marius Hornberger 2021-10-01 | A long-term review of the HAMMER K3 Basic sliding table saw after six years of private use. In addition to that, I made a few upgrades to the saw that add a lot of conveniences and should be standard. I wish I had made all of them years ago.Did you like what you see and want to support me?Also interested in more ad-free content and early access to new videos?Check out my Patreon: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger Video links mentionedFlip Stop modification: youtu.be/2zfokxM-DGwFlip Stop update: Flip Stop update: youtu.be/kH3U58RYnkw Enjoy the video!
I need your help Marius Hornberger 2021-08-10 | Scammers are using a video of mine to advertise a product that doesn't exist. It's a scam. Please help me to report that scam.Seems like their pages on Facebook are gone. We already got them three times. I guess they'll make new pages soon. Whenever you see an ad or website of them trying to sell the lifting table, please send me a link: marius.ho1995@gmail.comI can then forward it to a lawyer who works on taking all the sites down.You're a great community you can count on.
Engineering an Automatic CNC Dust-Shoe Marius Hornberger 2021-06-11 | I'm not happy with the dust-shoe that came with my CNC router. So I engineered a much better one. Maybe I went a bit too far because I made it fully automatic and implemented many useful features. The whole thing is a huge project and by no means straightforward. In this video, I take you through the whole process and show every step I went through for tackling this project. In hindsight, I also think about this as an engineering project on easy mode. The reasons for that I explain in the video. I hope you enjoyDrag chain files: thingiverse.com/thing:4883279Interested in the router bits I used for this project?*Spoilboard Surfacing Cutter: fraisertools.com/en/spoilboard-surfacing-router-cutters-with-insert-knives.html?affiliate_code=vtc5WMPbHf&referring_service=link*Spiral Upcut bits: fraisertools.com/en/alpha-spiral-covered-router-bit-z-2-upcut.html?affiliate_code=vtc5WMPbHf&referring_service=link*Spiral Downcut bits: fraisertools.com/en/alpha-spiral-covered-router-bit-z-2-downcut.html?affiliate_code=vtc5WMPbHf&referring_service=link*Compression/ Nesting bits: fraisertools.com/en/delta-nesting-spiral-router-bit.html?affiliate_code=vtc5WMPbHf&referring_service=link*Spiral Upcut roughing bits (with chip breaker): fraisertools.com/en/charlie-spiral-covered-router-bits-upcut.html?affiliate_code=vtc5WMPbHf&referring_service=link*Conical Spiral Upcut ballnose bits: fraisertools.com/en/zeta-covered-spiral-carving-2d-3d-router-bit.html?affiliate_code=vtc5WMPbHf&referring_service=link*Spiral Upcut ball nose bits: fraisertools.com/en/omega-ball-nose-coated-spiral-bits-upcut.html?affiliate_code=vtc5WMPbHf&referring_service=link*Bit set: fraisertools.com/en/boss-complete-box-covered-cnc-kit.html?affiliate_code=vtc5WMPbHf&referring_service=linkContent:0:00 Introduction1:10 Why?5:48 Design7:43 Manufacturing9:08 Assembly23:05 Making the Brush27:48 Electronics32:16 First Movement32:45 Setup and Clearance34:40 Air Nozzle36:27 Testing38:37 ConclusionSupport me here: patreon.com/mariushornberger?ty=hor support me through my Amazon wishlist: amzn.to/2QoQbhwFollow me on Instagram: instagram.com/marius.hornbergerEnjoy the video!
Smart & Easy Drawer Slide, Q&A and Mini Project (Random Shop Stuff 26) Marius Hornberger 2021-06-04 | In a past video I asked for some questions. But since I did that in a way so you could only fin d that if you watched the whole video. It acheived what I wanted and I got only good questions, also more personal ones and didn't had to filter any of them. I also built a simple stand for a freezer with a drawer. I made wooden drawer slides, that are almost full extension and the drawer won't fall down and has a positive stop.Links to the channels I mentioned:@Jer_Schmidt @toolify (Kriss)@Matthiaswandel @StuffMadeHere @OverSimplified @rctestflight @TomStantonEngineering @coldmirror @LetsGameItOut Link to the big In-Depth project: (coming next week)Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger Enjoy the video!
Renewing an outdoor bench | simple Spring project + miter saw testing Marius Hornberger 2021-05-28 | My parents have a nice little bench next to the front door. It's 8 years old and exposed to any kind of weather all the time. Now it needed some care and new boards. In the video, I show the disassembly, the making of the new boards, and the reassembly. This video was also sponsored by Bosch Professional. They provided me with their new battery-powered miter-saw GCM18V-305 GDC PROFESSIONAL. In addition to making the bench boards with it, I also tested the limits of the power output the saw can provide.Link to the saw: bit.ly/3qBZrg1Content of the video:0:00 Introduction00:16 Disassembly00:51 Making new boards03:37 Closer look at the miter-saw04:15 Miter-saw stress test09:37 Miter saw battery life10:48 AssemblyLike what you saw? Please consider supporting me:Patreon: patreon.com/mariushornberger?ty=hor Amazon wishlist: amzn.to/2QoQbhwFollow me on Instagram for additional content: instagram.com/marius.hornbergerEnjoy the video!#BOSCHPROFESSIONAL #BOSCHBITURBO
Fixing an old Dining Table Marius Hornberger 2021-01-03 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger When I built a new dining table for my parents we kept the old one in storage, because my sister could still use it. Since it is 18 years old and had seen some good use it needed some fixes before using it again. And compared to buying a new one that's totally worth it.I also have a two-part series about building the new dining table for my parents: youtube.com/playlist?list=PLBfiYOoCeIJuCNaBZUe2mYLe89q1_hGa- Enjoy the video!
Testing Diamond-Coated Routerbits + Giveaway & Free Spreadsheet Marius Hornberger 2020-12-19 | *Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger For some time now, I had a surfacing bit with carbide inserts and an 8mm shaft, which is a common standard size for router bits in the EU. I quite like it, and the manufacturer of it is Fraiser. So I had a look at their website and found some other bits for the CNC router that seemed to be very promising. And they also have an affiliate program. So I contacted them and asked for a few router bits. And in exchange for this video, they sent them to me. So yes, this was a sponsored video. Instead of a project, I first wanted to push the bits and my CNC machine to the limit. Also, I wanted to have cutting data that were made on my machine. For the future, that means I never have to guess what cut settings I need to use. I can just look them up. And that's what I did in this video.Thanks again to Fraiser for supporting this video and making the giveaway possible.Download link for my Excel spreadsheet with cutting data:https://1drv.ms/x/s!AvnyWUOnZKMUsF5njLJcUXFISAVO?e=UetTeoyou can download it, or you can also directly use onlineLink to the test program: https://1drv.ms/u/s!AvnyWUOnZKMUsWLuBFNfabiO7dno?e=VK8pQYAffiliate links for the router bits:German links:*Hobelfräser mit Wendeplatten: fraisertools.com/de/hobelfraser-mit-wendeplatten-tornado.html?affiliate_code=vtc5WMPbHf&referring_service=link*Spiralnutfräser positive Schneide: fraisertools.com/de/spiralnutfraser-spirale-z-2-upcut-alpha.html?affiliate_code=vtc5WMPbHf&referring_service=link*Spiralnutfräser negative Schneide: fraisertools.com/de/alpha-spiralnutfraser-spirale-z-2-downcut.html?affiliate_code=vtc5WMPbHf&referring_service=link*Spiralnutfräser wechselseitig (Kompression/ Nesting): fraisertools.com/de/delta-spiralnutfraser-wechselseitige.html?affiliate_code=vtc5WMPbHf&referring_service=link*Spiralnut-Schruppfräser: fraisertools.com/de/charlie-spiralnutfraser-spirale-upcut.html?affiliate_code=vtc5WMPbHf&referring_service=link*Konischer Spiralkugelfräser: fraisertools.com/de/zeta-hohlkehlfraser-mit-positiven-spiralschneiden-2d-3d.html?affiliate_code=vtc5WMPbHf&referring_service=link*Spiralkugelfräser: fraisertools.com/de/omega-ball-nose-spiralschneiden-upcut.html?affiliate_code=vtc5WMPbHf&referring_service=link*Fräser Set: fraisertools.com/de/boss-complete-box-cnc-holzfraser-bausatz.html?affiliate_code=vtc5WMPbHf&referring_service=linkEnglish links:*Spoilboard Surfacing Cutter: fraisertools.com/en/spoilboard-surfacing-router-cutters-with-insert-knives.html?affiliate_code=vtc5WMPbHf&referring_service=link*Spiral Upcut bits: fraisertools.com/en/alpha-spiral-covered-router-bit-z-2-upcut.html?affiliate_code=vtc5WMPbHf&referring_service=link*Spiral Downcut bits: fraisertools.com/en/alpha-spiral-covered-router-bit-z-2-downcut.html?affiliate_code=vtc5WMPbHf&referring_service=link*Compression/ Nesting bits: fraisertools.com/en/delta-nesting-spiral-router-bit.html?affiliate_code=vtc5WMPbHf&referring_service=link*Spiral Upcut roughing bits (with chip breaker): fraisertools.com/en/charlie-spiral-covered-router-bits-upcut.html?affiliate_code=vtc5WMPbHf&referring_service=link*Conical Spiral Upcut ballnose bits: fraisertools.com/en/zeta-covered-spiral-carving-2d-3d-router-bit.html?affiliate_code=vtc5WMPbHf&referring_service=link*Spiral Upcut ball nose bits: fraisertools.com/en/omega-ball-nose-coated-spiral-bits-upcut.html?affiliate_code=vtc5WMPbHf&referring_service=link*Bit set: fraisertools.com/en/boss-complete-box-covered-cnc-kit.html?affiliate_code=vtc5WMPbHf&referring_service=link Second giveaway hint: What is your project that you want to use the router bit for? Enjoy the video!
Octoprint for the 3D printer and big project announcement (Random Shop Stuff 25) Marius Hornberger 2020-10-24 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger Video content:0:00 Intro0:16 CNC router update3:05 Dust covers & cable management6:25 Octoprint16:00 assembling the modular camera arm21:31 What 3D printer do I use & How do I like it?26:22 Big project announcementVarious updates regarding the CNC router, setting up Octoprint with a Raspberry Pi camera module v2, and a big project announcement.Thingiverse link for the camera arm: thingiverse.com/thing:4631375Thingiverse link to the original camera case: thingiverse.com/thing:2956323Thingiverse link to the RPi housing: thingiverse.com/thing:3759782Tutorial for setting up Octoprint: youtu.be/mnN4HVmjafsTutorial for manual bed leveling: github.com/PrusaOwners/prusaowners/wiki/Bed_Leveling_without_Wave_Springs Enjoy the video!#MariusHornberger #RandomShopStuff #Octoprint
How to acheive perfect alignment and repeatability at the CNC router (with bench dogs) Marius Hornberger 2020-10-16 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger In the last video, I made some precise bench dogs for use at the CNC router for workpiece positioning. In this video, I show how I made the matching hole grid in the CNC table and how I use the system. It has many benefits.- No need for dialing in x = 0 and Y = 0 (once configured)- Repeatable placement of parts- easy alignment when making two-sided operationsWatch the last video here: youtu.be/YL9LlusEMtgLink to the lathe die holder: thingiverse.com/thing:4625352Link to Jay Bates' video: youtube.com/watch?v=KXflrR8HFTs&t=1052sLinks to the router bits. If you buy some of them through these links, you will support me without paying more.Spiral Upcut bits: fraisertools.com/de/spiralnutfraser-spirale-z-2-upcut-alpha.html?affiliate_code=vtc5WMPbHf&referring_service=linkSpiral Downcut bits: fraisertools.com/de/alpha-spiralnutfraser-spirale-z-2-downcut.html?affiliate_code=vtc5WMPbHf&referring_service=linkCompression bits: fraisertools.com/de/delta-spiralnutfraser-wechselseitige.html?affiliate_code=vtc5WMPbHf&referring_service=linkCarbide inserts surfacing bits: fraisertools.com/de/boss-tornado-hobelfraser-mit-wendeplatten.html?affiliate_code=vtc5WMPbHf&referring_service=link Enjoy the video!
I made Precision Bench Dogs Marius Hornberger 2020-10-09 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger I needed custom bench dogs to use for workpiece positioning on my CNC router. I decided to make them myself out of Alumin(i)um and POM.Here's the link to the next video: youtu.be/Unq36TDp5BQ Enjoy the video!
My HOMEMADE WOODEN Bandsaw can now cut METAL!!! (Bandsaw Upgrades Part 2) Marius Hornberger 2020-10-02 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornbergerThis is the second part of the bandsaw upgrades. In this one, I'm installing a variable frequency drive that didn't go as planned. But the end result is better than expected.With the upgrade, it's now also capable of cutting metal. Watch Part 1: youtu.be/QQNAif5lDjoMaking the pulleys: youtu.be/YMrCWJDaImUExplaining problems with the VFD: youtu.be/MkILcdCutWIProof Wood: youtube.com/channel/UCewU7vV-uVSVCO8Ai1vr6KwAlexFuerst: youtube.com/channel/UCSMcGAnGVKtgDfhwPW5VfLw Enjoy the video!
Automated CNC Dust Collection for just 20€ Marius Hornberger 2020-09-25 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger In this video, I show how I automated my dust collection for the CNC-router with a relay. The relay is controlled with the software by using the M8 code that normally is used for flood cooling. But since my machine will never have flood cooling I can use it for dust collection.More information about the relay I used:Relay: Finder No.: 40.62.9.048.0000Mount: Finder No.: 95.85.3Diode: Finder No.: 99.80.9.060.99Metal clip: I have no part number of that unfortunately Enjoy the video!
Dust Collector Update & RODE WIGO Charging Station (Random Shop Stuff 24) Marius Hornberger 2020-09-04 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger I got asked to give an update about the dust collector that I've built a few years ago and show how it's holding up.Also I made a charging station for my RODE WIGO microphone. I also explain the design process of making it.Video links mentioned:Big Dust collector: youtube.com/watch?v=zN1QW_BTArQ&list=PLBfiYOoCeIJv1FjCDit8dGyfAbpe_lRRGSmall Dust collector: youtube.com/watch?v=MAk2i8dEh1Q&list=PLBfiYOoCeIJtmTF9VeCkfZAMJmmTyM9NPBandsaw pulley: youtu.be/QQNAif5lDjoLink to the Thingiverse file:thingiverse.com/thing:4587047 Enjoy the video!
Perfectly Flat CNC Spoilboard & Spindle Tramming with a Simple Jig Marius Hornberger 2020-08-28 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger With the new CNC Spoildbaord construction done, it's time to glue on the MDF top surface. To get it perfectly flat it needs a spindle that is aligned to the machine bed. In this video, I show how I did that.Video links mentioned:Hold down clamps: youtu.be/OAGlU98xcCwPrevious update video: youtu.be/MkILcdCutWISpindle tramming jig: youtube.com/watch?v=9h5srzEBla4Video about this CNC router: youtu.be/jqpJy86iwxc Enjoy the video!
Bandsaw Update, Awesome Gift from a Viewer and CNC Worksurface Update (Random Shop Stuff 23) Marius Hornberger 2020-08-21 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger A quick video about a shop update and unboxing an awesome gift from a viewer.Video links mentionedBandsaw Upgrade: youtu.be/QQNAif5lDjoCNC clamping system: youtu.be/OAGlU98xcCwRouter bit: fraisertools.com/de/hobelfraser-mit-wendeplatten-tornado.html Enjoy the video!#MariusHornberger
Turning a Poly-V belt Pulley for the Homemade Bandsaw Marius Hornberger 2020-08-14 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger In this video, I show how I turned the Poly-V belt pulley for my homemade bandsaw on the lathe out of PE. It is more or less part of this video:youtu.be/QQNAif5lDjoBut in that one, I went over making this pulley rather quickly since it was already quite long. So here is the full-length version.Router circle jig: youtu.be/YQdNaJFDUR0The slot was cut with the Hybrid PantoRouterhttp://www.hybridpantorouter.jpFor the US: http://hybridpantorouter.com Enjoy the video!#mariushornberger #homemade #turning
3D-printed Pulley for my Homemade 2HP Bandsaw (Bandsaw Upgrades Part 1) Marius Hornberger 2020-08-07 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger I want to fix the slipping belt of my homemade bandsaw. It turned out to be quite the journey.Video links mentioned:Part 2: soonMaking the motor pulley: youtu.be/YMrCWJDaImURouter Circle Jig: youtu.be/YQdNaJFDUR0Making the bandsaw wheels: youtu.be/f8l4YssKKf8More homemade machines: youtube.com/playlist?list=PLBfiYOoCeIJtoEO-C_F67E6FIlhiSCHZa Enjoy the video!#homemade #bandsaw #mariushornberger
News from BOSCH Professional (18V powered Update) Marius Hornberger 2020-07-21 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger Bosch announced, that they're opening their 18v battery system for partners. So you can use the 18v professional batteries with other tools from other manufacturers.More information here: professional-18v-system.com/de/deyoutube.com/user/BoschProfessionalDE/videos Enjoy the video!#BOSCHPROFESSIONAL#professional18vsystem
HOW TO Use a Drawer Routerbit Marius Hornberger 2020-05-29 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger I've got this drawer joinery bit from ENT. It didn't come with any instructions on how to use it. There are some instructions on their website that are wrong...and also if they're right, they don't provide enough information. So I decided to make a tutorial video about how to use it and how to size your pieces to achieve specific dimensions. Link to the router bit: amzn.to/3LJQU6E Enjoy the video!
Mum Projects | Cool Mothers Day Gift Ideas Marius Hornberger 2020-05-02 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger My mum asked for a couple projects. They would also make some nice mother's day gifts. Enjoy the video!
My New Audio sounds so much BETTER & Drawer Routerbit (Random Shop stuff 22) Marius Hornberger 2020-04-24 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger I upgraded my audio setup on my camera. I lav-mic was never really an option for me because a loose cable on your body in the workshop is a bad idea. But with this all in one kit from RODE I can't say no any longer. I think it sounds a lot better.Link to the guide for the router bit (I try to contact them and ask them to fix the guide):https://pim.ent.tools/ent-dateien/002_b_manuals/16270/16270_Manual_DE.pdfVideo links mentioned:Drawer router bit tutorial (in german): youtu.be/vAryI_Vbkl4 Enjoy the video!
NEW Quick Release CNC spindle Marius Hornberger 2020-04-20 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger When I got the new CNC router, the spindle with software speed control didn't already exist. Now a few weeks later I got it and could install it.Video links:Presenting this CNC router: youtu.be/jqpJy86iwxc Enjoy the video!
Answering your Questions to the Curved Shelf Project Marius Hornberger 2020-04-12 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornbergerYou had many questions about the curved shelf project. I tried my best answering all of them in this video.Video links mentioned in this video:Curved Shelf build: youtu.be/4hlgiwYqgHMOlder Shelf build with a similar design: youtu.be/io5AFxqhaPYLinks to dust collection hoses:https://www.mima.de/Produkte/Absaugtechnik/holz-metall.info/shop1/kategorie532.htm Enjoy the video!
Building an Amazing Shelf with more than 500 wooden Segments Marius Hornberger 2020-04-05 | Support me here: patreon.com/mariushornberger?ty=hor support me through my Amazon wishlist: amzn.to/2QoQbhwFollow me on Instagram: instagram.com/marius.hornbergerAn in-depth video about building a wooden shelf, that was one of the biggest woodworking challenges for myself. I hope you enjoy the video and get something out of it.Video links mentioned in the video:More about my jointer/planer: youtube.com/playlist?list=PLBfiYOoCeIJutfGm6WNANCBs_23Qkl1wJWedgie sled: youtu.be/jj1d9OSA2UQRouter circle jig: youtu.be/YQdNaJFDUR0Router joinery jig: youtu.be/2IMDZ2vs8NMHand-Held Drum sander: youtu.be/zzOuT4P-WB0Links for the Pantorouter:How it works and where to get one: http://www.hybridpantorouter.jpFor the US: http://hybridpantorouter.comEnjoy the video!
Building a Smart Router Circle Jig with Kriss (no more cord tangling) Marius Hornberger 2020-03-27 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger I needed a circle jig, so I built one. But not alone. Kriss from the channel Toolify visited me for a few days and we made this project together.Visit Toolify: youtube.com/user/rockynine11Link to the video mentioned: youtube.com/watch?v=UkRh68OC_lM Enjoy the video!
How to Drill with a Holesaw without Burn Marks Marius Hornberger 2020-03-23 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger I got this question from viewers a few times and now decided to make it into a quick video. Enjoy the video!
Project Updates+Previews, answering questions and more (Random Shop Stuff 21) Marius Hornberger 2020-03-20 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger Enjoy the video!
Building my New 2400€ Editing PC Marius Hornberger 2020-03-13 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger After four years of use it was time to upgrade my editing PC that I edit all my videos with. I spent a little bit more this time, so it will hopefully last longer than four years!The specs:CPU: AMD Ryzen 9 3950xMainboard: MSI MPG X570 Gaming pro carbonRAM: 64 GB DDR4 3200 MHzCooler: NZXT Kraken X72 360mmGPU: MSI GeForce RTX 2060 SuperPSU: 600w be quiet! Pure Power 11 80+GoldCase: be quiet! Pure Base 600drives:- 512GB Samsung 970 Pro M.2- 1000GB Samsung 970 Evo M.2 (editing drive)from old PC:- 500GB Crucial SSD- 8 TB HDD Archive drive- 2 TB HDD Enjoy the video!
A QUICK to use Clamping System for CNC T-tracks Marius Hornberger 2020-03-06 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger With the new CNC router and its spoil board with T-tracks, I needed a new clamping system and had many very useful ideas. Link to the 3D print files: thingiverse.com/thing:4204962 Enjoy the video!
3D carved picture frame Marius Hornberger 2020-02-28 | Support me here: patreon.com/mariushornberger?ty=h or support me through my Amazon wishlist: amzn.to/2QoQbhw Follow me on Instagram: instagram.com/marius.hornberger A friend asaked me to make a 3D carved picture frame that fits the theme of the picture.Vectric offered me a licence for Aspire to try out and I used that to create this picture frame. Enjoy the video!
