Uploaded June 2024 | Updated November 2026, 5 days ago
I finish repairing a ZX Spectrum 128K Toastrack that would not boot after a bad recap. The fault is a damaged trace between the Z80 reset pin and the reset capacitor, found by checking the reset circuit with a multimeter and microscope. I rebuild the connection with a wire and the Spectrum runs again.
Sponsored by PCBWay: Big thanks to PCBWay for supporting this video โ my go-to for high-quality PCB manufacturing, 3D printing, and more. (Thank you to Elaine Hu and the PCBWay team for backing the channel!)
Support the Channel:
If you enjoy this content, please consider helping out on Patreon (patreon.com/markfixesstuff) for early ad-free access, exclusive behind-the-scenes updates, and patron-only perks.
You can also buy me a coffee on Ko-fi (ko-fi.com/markfixesstuff) to keep the workshop lights on. Your support truly makes a difference โ thank you! ๐
CHAPTERS
0:00 ZX Spectrum 128K Toastrack finale
0:32 Sponsor: PCBWay
1:02 The Z80 reset pin signal
3:36 Checking the reset signal
4:06 Rechecking capacitors from the earlier recap
5:39 Measuring the capacitor and resistor R31
6:43 Removing wires from the board
8:14 Discovering a damaged trace
9:46 Planning the repair
10:19 Soldering the capacitor back in
12:22 Remaking the reset pin connection
13:22 Spectrum repaired
14:54 Running the diagnostic ROM
15:55 Playing Manic Miner
16:58 Patron thanks and outro
SUPPORT THE CHANNEL
Website: markfixesstuff.com
LATEST VIDEOS
youtube.com/@MarkFixesStuff/videos
#ZXSpectrum
#ZXSpectrum128K
#RetroComputing
#ElectronicsRepair
#VintageComputing
I finish repairing a ZX Spectrum 128K Toastrack that would not boot after a bad recap. The fault is a damaged trace between the Z80 reset pin and the reset capacitor, found by checking the reset circuit with a multimeter and microscope. I rebuild the connection with a wire and the Spectrum runs again.
Sponsored by PCBWay: Big thanks to PCBWay for supporting this video โ my go-to for high-quality PCB manufacturing, 3D printing, and more. (Thank you to Elaine Hu and the PCBWay team for backing the channel!)
Support the Channel:
If you enjoy this content, please consider helping out on Patreon (patreon.com/markfixesstuff) for early ad-free access, exclusive behind-the-scenes updates, and patron-only perks.
You can also buy me a coffee on Ko-fi (ko-fi.com/markfixesstuff) to keep the workshop lights on. Your support truly makes a difference โ thank you! ๐
CHAPTERS
0:00 ZX Spectrum 128K Toastrack finale
0:32 Sponsor: PCBWay
1:02 The Z80 reset pin signal
3:36 Checking the reset signal
4:06 Rechecking capacitors from the earlier recap
5:39 Measuring the capacitor and resistor R31
6:43 Removing wires from the board
8:14 Discovering a damaged trace
9:46 Planning the repair
10:19 Soldering the capacitor back in
12:22 Remaking the reset pin connection
13:22 Spectrum repaired
14:54 Running the diagnostic ROM
15:55 Playing Manic Miner
16:58 Patron thanks and outro
SUPPORT THE CHANNEL
Website: markfixesstuff.com
LATEST VIDEOS
youtube.com/@MarkFixesStuff/videos
#ZXSpectrum
#ZXSpectrum128K
#RetroComputing
#ElectronicsRepair
#VintageComputing










