Mark Fixes Stuff | Building a TZXDuino & How to program (or Update) the Firmware! @MarkFixesStuff | Uploaded August 2021 | Updated October 2024, 9 hours ago.
This video is kindly sponsored by https://www.PCBWay.com! Join me as we build a TZXDuino, from PCB through to programming the Arduino!
We go through the whole build, set up the Arduino IDE software with the required libraries and I explain how to program the unit (and where to get the latest firmwares).
π€ PLEASE HELP MARK FIXES STUFF SURVIVE π: Due to "The Event" my livelihood vanished in a puff of smoke. If you can spare some change to help support the channel it is really appreciated and even the smallest pledge goes a long way in helping make more content and feed my cats (and children). Visit patreon.com/markfixesstuff for more info about Patreon Benefits!
You can order your own PCB from: pcbway.com/project/shareproject/TZXDuino_Shield_V2.html thanks to Zaxon who has kindly allowed me to host the files on PCBWay. Note that this is for the V2 board, with a motor control socket and the socket fix in the video already taken care of!
Zaxon's Web Store for great gadgets!: sellmyretro.com/user/profile/zaxon
00:00 - Introducing the Zaxon TZXDuino Build
00:22 - Mark Fixes Stuff Intro
00:28 - PCBWay Sponsor Segment
00:42 - TZXDuino Parts List / BOM / Bill of Materials
01:32 - Cleaning the PCB with Isopropanol Alcohol
01:54 - Correcting the V1 TZXDuino Shield PCB Error
02:03 - Using a Dremel to cut a circut board track
02:34 - Soldering and Building the TZXDuino Step By Step
18:25 - How to set up the Arduino IDE to program the TZXDuino & Update it in the future.
22:06 - How to connect to the Arduino, selecting the right board type and the correct port.
23:03 - When programming an Arduino Nano clone fails - Using the Old Bootloader.
24:10 - Power on and testing with a ZX Spectrum.
25:40 - Ordering a V2 board online
25:52 - Patreon Thanks!
26:18 - Further Viewing.
#TZXDuino #RetroComputing #MAXDuino
This video is kindly sponsored by https://www.PCBWay.com! Join me as we build a TZXDuino, from PCB through to programming the Arduino!
We go through the whole build, set up the Arduino IDE software with the required libraries and I explain how to program the unit (and where to get the latest firmwares).
π€ PLEASE HELP MARK FIXES STUFF SURVIVE π: Due to "The Event" my livelihood vanished in a puff of smoke. If you can spare some change to help support the channel it is really appreciated and even the smallest pledge goes a long way in helping make more content and feed my cats (and children). Visit patreon.com/markfixesstuff for more info about Patreon Benefits!
You can order your own PCB from: pcbway.com/project/shareproject/TZXDuino_Shield_V2.html thanks to Zaxon who has kindly allowed me to host the files on PCBWay. Note that this is for the V2 board, with a motor control socket and the socket fix in the video already taken care of!
Zaxon's Web Store for great gadgets!: sellmyretro.com/user/profile/zaxon
00:00 - Introducing the Zaxon TZXDuino Build
00:22 - Mark Fixes Stuff Intro
00:28 - PCBWay Sponsor Segment
00:42 - TZXDuino Parts List / BOM / Bill of Materials
01:32 - Cleaning the PCB with Isopropanol Alcohol
01:54 - Correcting the V1 TZXDuino Shield PCB Error
02:03 - Using a Dremel to cut a circut board track
02:34 - Soldering and Building the TZXDuino Step By Step
18:25 - How to set up the Arduino IDE to program the TZXDuino & Update it in the future.
22:06 - How to connect to the Arduino, selecting the right board type and the correct port.
23:03 - When programming an Arduino Nano clone fails - Using the Old Bootloader.
24:10 - Power on and testing with a ZX Spectrum.
25:40 - Ordering a V2 board online
25:52 - Patreon Thanks!
26:18 - Further Viewing.
#TZXDuino #RetroComputing #MAXDuino