Yamaha CR-400 Stereo Receiver Introduction @OldSchoolElectronics
Yamaha CR-400 Stereo Receiver Introduction  @OldSchoolElectronics
Uploaded January 2016 | Updated September 2026, 2 weeks ago
Power output: 18 watts per channel both channels driven, into 8Ω, with a 1000 Hz sine wave injected--according to the manufacturer. I measured 17-18 watts per channel under the same conditions.
Total Harmonic Distortion according to the manufacturer is less than 0.5% at rated output.
Frequency response: 20Hz to 50kHz
Total harmonic distortion: 0.5%
Damping factor: 40
Input sensitivity: 3mV (mic), 3mV (MM), 150mV (line)
Signal to noise ratio: 65dB (mic), 72dB (MM), 85dB (line)
Channel separation: 50dB (MM), 50dB (line)
Output: 150mV (line), 0.2V (Pre out)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 444 x 158 x 300mm
Weight: 9.5kg
Yamaha CR-400 Stereo Receiver IntroductionPioneer XC-L5   Part 2   Optical pickup installationMeasuring Electrolytic Capacitors Values With A VOMHP334A Distortion Meter TryoutSanyo M4500 Signal Strength MeterUnknown Transformer Identification   Voltages OnlySharp GF 555 Cassette Mechanism RemovalPioneer SX-690 Channel Separation TestSharp GF-555 Counter BeltBelt Drive Turntable Shut-off MechanismCrystal  Tester And Frequency Counter TS-905Pioneer SX-690 Stereo Receiver Phono Preamp Testing
Old School |

Yamaha CR-400 Stereo Receiver Introduction

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER