Uploaded June 2026 | Updated November 2026, 3 hours ago
๐ *The full guide* : _https://core-electronics.com.au/guides/laser-cutting/xtool-f2-ultra-setup-guide-assembly-and-calibration/_
In this video, we will be setting up the xTool F2 Ultra to get you cutting and engraving quickly! We wll be unboxing the F2 Ultra and AP2 air filter, as well as setting it up with xTool Studio.
๐ง๐จ๐งฐ Hardware featured in this guide:
*F2 Ultra + AP2 Bundle:*
_https://core-electronics.com.au/catalog/product/view/sku/F2-ULTRA-DELUXE_
*Cutting Materials:*
_https://core-electronics.com.au/laser-cutters/materials.html#category_7283_
*xTool:*
_https://core-electronics.com.au/laser-cutters.html#category_7256_
๐กโ If you have any questions about this content or want to share a project you're working on head over to our *maker forum:* _coreelec.io/forum_
0:00 Unboxing
1:27 euuoooOOHH AAAAEERrroohhh
1:33 Continuing Unboxing
3:20 Setting Up xTool Studio
5:23 Some Worthwhile Settings
๐๐ฆ *Core Electronics* is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:
โข *Raspberry Pi* _https://core-electronics.com.au/raspberry-pi.html_
โข *Arduino* _https://core-electronics.com.au/arduino.html_
โข *Sparkfun* _https://core-electronics.com.au/brands/sparkfun-australia_
โข *Adafruit* _https://core-electronics.com.au/brands/adafruit-australia_
โข *Pololu* _https://core-electronics.com.au/brands/pololu-australia_
โข *DFRobot* _https://core-electronics.com.au/brands/dfrobot-australia_
The following trademarks are owned by *Core Electronics Pty Ltd:*
"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo
๐ *The full guide* : _https://core-electronics.com.au/guides/laser-cutting/xtool-f2-ultra-setup-guide-assembly-and-calibration/_
In this video, we will be setting up the xTool F2 Ultra to get you cutting and engraving quickly! We wll be unboxing the F2 Ultra and AP2 air filter, as well as setting it up with xTool Studio.
๐ง๐จ๐งฐ Hardware featured in this guide:
*F2 Ultra + AP2 Bundle:*
_https://core-electronics.com.au/catalog/product/view/sku/F2-ULTRA-DELUXE_
*Cutting Materials:*
_https://core-electronics.com.au/laser-cutters/materials.html#category_7283_
*xTool:*
_https://core-electronics.com.au/laser-cutters.html#category_7256_
๐กโ If you have any questions about this content or want to share a project you're working on head over to our *maker forum:* _coreelec.io/forum_
0:00 Unboxing
1:27 euuoooOOHH AAAAEERrroohhh
1:33 Continuing Unboxing
3:20 Setting Up xTool Studio
5:23 Some Worthwhile Settings
๐๐ฆ *Core Electronics* is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:
โข *Raspberry Pi* _https://core-electronics.com.au/raspberry-pi.html_
โข *Arduino* _https://core-electronics.com.au/arduino.html_
โข *Sparkfun* _https://core-electronics.com.au/brands/sparkfun-australia_
โข *Adafruit* _https://core-electronics.com.au/brands/adafruit-australia_
โข *Pololu* _https://core-electronics.com.au/brands/pololu-australia_
โข *DFRobot* _https://core-electronics.com.au/brands/dfrobot-australia_
The following trademarks are owned by *Core Electronics Pty Ltd:*
"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo










