Uploaded June 2026 | Updated November 2026, 3 hours ago
๐ *The full guide* : _https://core-electronics.com.au/guides/laser-cutting/getting-started-with-the-xtool-s1-unboxing-to-first-cut/_
In this video, we are getting your *xTool S1* up and running so you can get cutting! We are gonna look at *unboxing and setting* up the machine, installing *xTool Studio,* as well as designing and cutting a simple nametag as a nice little *beginner project!*
๐ง๐จ๐งฐ Hardware featured in this guide:
*xTool S1:*
_https://core-electronics.com.au/catalog/product/view/sku/CE10482_
*xTool S1 All-in-1 Bundle:*
_https://core-electronics.com.au/catalog/product/view/sku/S1-SAFETY-PRO_
*Laser Cutter Materials:*
_https://core-electronics.com.au/laser-cutters/materials.html_
๐กโ If you have any questions about this content or want to share a project you're working on head over to our *maker forum:* _coreelec.io/forum_
0:00 Unboxing and Setting Up the Machine
4:54 Installing xTool Studio
5:42 Designing the Name Tag
7:45 Assigning Cuts and Settings
10:31 Prepping the Cut
12:45 Outro
๐๐ฆ *Core Electronics* is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:
โข *Raspberry Pi* _https://core-electronics.com.au/raspberry-pi.html_
โข *Arduino* _https://core-electronics.com.au/arduino.html_
โข *Sparkfun* _https://core-electronics.com.au/brands/sparkfun-australia_
โข *Adafruit* _https://core-electronics.com.au/brands/adafruit-australia_
โข *Pololu* _https://core-electronics.com.au/brands/pololu-australia_
โข *DFRobot* _https://core-electronics.com.au/brands/dfrobot-australia_
The following trademarks are owned by *Core Electronics Pty Ltd:*
"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo
๐ *The full guide* : _https://core-electronics.com.au/guides/laser-cutting/getting-started-with-the-xtool-s1-unboxing-to-first-cut/_
In this video, we are getting your *xTool S1* up and running so you can get cutting! We are gonna look at *unboxing and setting* up the machine, installing *xTool Studio,* as well as designing and cutting a simple nametag as a nice little *beginner project!*
๐ง๐จ๐งฐ Hardware featured in this guide:
*xTool S1:*
_https://core-electronics.com.au/catalog/product/view/sku/CE10482_
*xTool S1 All-in-1 Bundle:*
_https://core-electronics.com.au/catalog/product/view/sku/S1-SAFETY-PRO_
*Laser Cutter Materials:*
_https://core-electronics.com.au/laser-cutters/materials.html_
๐กโ If you have any questions about this content or want to share a project you're working on head over to our *maker forum:* _coreelec.io/forum_
0:00 Unboxing and Setting Up the Machine
4:54 Installing xTool Studio
5:42 Designing the Name Tag
7:45 Assigning Cuts and Settings
10:31 Prepping the Cut
12:45 Outro
๐๐ฆ *Core Electronics* is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:
โข *Raspberry Pi* _https://core-electronics.com.au/raspberry-pi.html_
โข *Arduino* _https://core-electronics.com.au/arduino.html_
โข *Sparkfun* _https://core-electronics.com.au/brands/sparkfun-australia_
โข *Adafruit* _https://core-electronics.com.au/brands/adafruit-australia_
โข *Pololu* _https://core-electronics.com.au/brands/pololu-australia_
โข *DFRobot* _https://core-electronics.com.au/brands/dfrobot-australia_
The following trademarks are owned by *Core Electronics Pty Ltd:*
"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo










