Uploaded April 2025 | Updated November 2026, 3 hours ago
๐ *The full guide* : _https://core-electronics.com.au/guides/raspberry-pi-pico/how-to-control-a-pump-with-a-raspberry-pi-pico/_
In this practical guide, we are going to be learning how to add a *liquid pump* to a *Pico* in your maker project. We will be looking at whether you should use a *Peristaltic Pump* or a *Submersible Pump* , how to wire one up to a Pico with a *motor driver* , and how to program the Pico to control the motor.
๐ง๐จ๐งฐ Hardware featured in this guide:
*Peristaltic Pump*
_https://core-electronics.com.au/catalog/product/view/sku/CE10149_
*Submersible Pump*
_https://core-electronics.com.au/catalog/product/view/sku/FIT0800_
*Picos:*
_https://core-electronics.com.au/raspberry-pi/pico.html#category_2118_
๐กโ If you have any questions about this content or want to share a project you're working on head over to our *maker forum:* _coreelec.io/forum_
0:00 Peristaltic vs Submersible Pumps
2:43 What You Will Need
3:30 Assembly
5:05 Programming the Pico
๐๐ฆ *Core Electronics* is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:
โข *Raspberry Pi* _https://core-electronics.com.au/raspberry-pi.html_
โข *Arduino* _https://core-electronics.com.au/arduino.html_
โข *Sparkfun* _https://core-electronics.com.au/brands/sparkfun-australia_
โข *Adafruit* _https://core-electronics.com.au/brands/adafruit-australia_
โข *Pololu* _https://core-electronics.com.au/brands/pololu-australia_
โข *DFRobot* _https://core-electronics.com.au/brands/dfrobot-australia_
The following trademarks are owned by *Core Electronics Pty Ltd:*
"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo
๐ *The full guide* : _https://core-electronics.com.au/guides/raspberry-pi-pico/how-to-control-a-pump-with-a-raspberry-pi-pico/_
In this practical guide, we are going to be learning how to add a *liquid pump* to a *Pico* in your maker project. We will be looking at whether you should use a *Peristaltic Pump* or a *Submersible Pump* , how to wire one up to a Pico with a *motor driver* , and how to program the Pico to control the motor.
๐ง๐จ๐งฐ Hardware featured in this guide:
*Peristaltic Pump*
_https://core-electronics.com.au/catalog/product/view/sku/CE10149_
*Submersible Pump*
_https://core-electronics.com.au/catalog/product/view/sku/FIT0800_
*Picos:*
_https://core-electronics.com.au/raspberry-pi/pico.html#category_2118_
๐กโ If you have any questions about this content or want to share a project you're working on head over to our *maker forum:* _coreelec.io/forum_
0:00 Peristaltic vs Submersible Pumps
2:43 What You Will Need
3:30 Assembly
5:05 Programming the Pico
๐๐ฆ *Core Electronics* is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:
โข *Raspberry Pi* _https://core-electronics.com.au/raspberry-pi.html_
โข *Arduino* _https://core-electronics.com.au/arduino.html_
โข *Sparkfun* _https://core-electronics.com.au/brands/sparkfun-australia_
โข *Adafruit* _https://core-electronics.com.au/brands/adafruit-australia_
โข *Pololu* _https://core-electronics.com.au/brands/pololu-australia_
โข *DFRobot* _https://core-electronics.com.au/brands/dfrobot-australia_
The following trademarks are owned by *Core Electronics Pty Ltd:*
"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo










