Uploaded February 2026 | Updated November 2026, 1 day ago
๐ *The full guide* : _https://core-electronics.com.au/guides/laser-cutting/setting-up-your-xtool-p3-from-unboxing-to-first-cut/_
In this tutorial, we will be setting up an *xTool P3 laser cutter,* as well as the stand, IF2, and AP2 max.
๐ง๐จ๐งฐ Hardware featured in this guide:
*xTool P3 Kit:*
_https://core-electronics.com.au/catalog/product/view/sku/P3-ALL-IN-ONE_
*xTool:*
_https://core-electronics.com.au/laser-cutters.html#category_7256_
๐กโ If you have any questions about this content or want to share a project you're working on head over to our *maker forum:* _coreelec.io/forum_
0:00 Intro
0:29 Assembling the Stand
2:04 Setting up the P3
4:23 Setting up Air Filtration
6:18 xTool Studio
7:38 Pairing AP2 Max and If2 Wirelessly
๐๐ฆ *Core Electronics* is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:
โข *Raspberry Pi* _https://core-electronics.com.au/raspberry-pi.html_
โข *Arduino* _https://core-electronics.com.au/arduino.html_
โข *Sparkfun* _https://core-electronics.com.au/brands/sparkfun-australia_
โข *Adafruit* _https://core-electronics.com.au/brands/adafruit-australia_
โข *Pololu* _https://core-electronics.com.au/brands/pololu-australia_
โข *DFRobot* _https://core-electronics.com.au/brands/dfrobot-australia_
The following trademarks are owned by *Core Electronics Pty Ltd:*
"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo
๐ *The full guide* : _https://core-electronics.com.au/guides/laser-cutting/setting-up-your-xtool-p3-from-unboxing-to-first-cut/_
In this tutorial, we will be setting up an *xTool P3 laser cutter,* as well as the stand, IF2, and AP2 max.
๐ง๐จ๐งฐ Hardware featured in this guide:
*xTool P3 Kit:*
_https://core-electronics.com.au/catalog/product/view/sku/P3-ALL-IN-ONE_
*xTool:*
_https://core-electronics.com.au/laser-cutters.html#category_7256_
๐กโ If you have any questions about this content or want to share a project you're working on head over to our *maker forum:* _coreelec.io/forum_
0:00 Intro
0:29 Assembling the Stand
2:04 Setting up the P3
4:23 Setting up Air Filtration
6:18 xTool Studio
7:38 Pairing AP2 Max and If2 Wirelessly
๐๐ฆ *Core Electronics* is located in the heart of Newcastle, Australia. We're powered by makers, for makers. Drop by if you are looking for:
โข *Raspberry Pi* _https://core-electronics.com.au/raspberry-pi.html_
โข *Arduino* _https://core-electronics.com.au/arduino.html_
โข *Sparkfun* _https://core-electronics.com.au/brands/sparkfun-australia_
โข *Adafruit* _https://core-electronics.com.au/brands/adafruit-australia_
โข *Pololu* _https://core-electronics.com.au/brands/pololu-australia_
โข *DFRobot* _https://core-electronics.com.au/brands/dfrobot-australia_
The following trademarks are owned by *Core Electronics Pty Ltd:*
"Core Electronics" and the Core Electronics logo
"Makerverse" and the Makerverse logo
"PiicoDev" and the PiicoDev logo
"GlowBit" and the GlowBit logo










